sodcalculator

10 Tech How-To

PHP vs HTML: Key Differences Explained

Tag 10-55239 · Updated · Standard formula, shown below

Volume 9.26 yd³
Volume
250.0 ft³
Result
Lawn length
40 ft
You entered
Lawn width
25 ft
You entered
You enter
Lawn length, Lawn width, Depth
You get
Volume, Volume
Rounding
2 dp · 1 dp

PHP is a server-side scripting language that processes logic and generates dynamic content, while HTML is a static markup language that structures and displays content in the browser. In short, HTML defines what appears on a page, and PHP defines how that content is created or manipulated before it is sent to the browser.

Formula

The calculator above computes the volume of soil, mulch, or other material needed to fill a rectangular area to a given depth. The formula used is:

Volume (cubic yards) = Length (ft) × Width (ft) × Depth (in) ÷ 324

Where:

  • Length (l) – the longer side of the rectangle, in feet.
  • Width (w) – the shorter side, in feet.
  • Depth (d) – how deep you want the material, in inches.

The divisor 324 comes from converting inches to feet (12 in/ft) and then cubic feet to cubic yards (27 ft³/yd³): 12 × 27 = 324. If you prefer cubic feet, the second output uses the formula Volume (ft³) = Length × Width × Depth ÷ 12.

Worked Example

Using the default values from the calculator: length = 40 ft, width = 25 ft, depth = 3 in.

  1. Multiply length by width: 40 × 25 = 1000 ft² (square feet).
  2. Multiply by depth in inches: 1000 × 3 = 3000 ft²·in.
  3. Divide by 324 to get cubic yards: 3000 ÷ 324 = 9.26 yd³ (rounded to two decimals).

So you need about 9.26 cubic yards of material. The calculator also shows the volume in cubic feet: 3000 ÷ 12 = 250 ft³.

When to Use This Calculator

Use this tool when you are planning to buy soil, mulch, gravel, sand, or concrete for a rectangular garden bed, lawn area, or construction project. It helps you estimate how much material to order, avoiding both shortages and over-ordering. For irregular shapes, divide the area into rectangles, calculate each separately, and add the results.

How to Read the Result

The first output (cubic yards) is the unit most bulk suppliers use for ordering. The second output (cubic feet) is useful when buying bagged material, which is often sold by the cubic foot. For example, if you need 250 ft³ and bags contain 2 ft³ each, you would need 125 bags. Always round up to the next whole bag or yard, since suppliers deliver in whole units.

Common Mistakes

  • Mixing units: Forgetting to convert depth from inches to feet. The formula already handles this, but if you use a different formula, keep units consistent.
  • Rounding too early: Round only at the final step, not during intermediate calculations, to avoid significant errors.
  • Ignoring compaction: Some materials (like fill dirt) settle after being placed, so you may need 10–20% extra. This calculator gives the theoretical volume; check with your supplier for recommended overage.

Limits of the Formula

This formula assumes a perfectly rectangular area with a uniform depth. It does not account for slopes, irregular edges, or material compaction. For large or critical projects, always verify measurements on site and consult a professional if needed. The calculator is a planning tool, not a substitute for engineering judgment.

Frequently Asked Questions

How many cubic feet are in a cubic yard?

There are 27 cubic feet in one cubic yard (3 feet × 3 feet × 3 feet). This is why the conversion factor 324 appears in the formula: it combines the 12-inch-per-foot conversion with the 27-cubic-feet-per-yard conversion.

Should I order extra material?

For most landscaping projects, ordering 5–10% extra is wise to account for spillage, uneven settling, and measurement errors. For fill dirt that will be compacted, you might need up to 20% more. Ask your supplier for their recommendation.

Can I use this for a circular area?

No, this calculator is for rectangular areas only. For a circle, use the formula π × radius² × depth, then convert to cubic yards by dividing by 324 (if depth is in inches).

What if my depth is in feet instead of inches?

If your depth is in feet, multiply length × width × depth (all in feet) and then divide by 27 to get cubic yards. For example, 40 ft × 25 ft × 0.25 ft = 250 ft³, which is 9.26 yd³.

How do I convert cubic yards to tons?

You need the material’s density. For example, dry topsoil is about 1.2 tons per cubic yard, while gravel is about 1.4 tons per cubic yard. Multiply your cubic yards by the density to get tons. Check with your supplier for the exact density of the material you are ordering.

Related

Formula used
in l | Lawn length | ft | 40 | 0 | 100000
in w | Lawn width | ft | 25 | 0 | 100000
in d | Depth | in | 3 | 0 | 120
out yd | Volume | yd³ | l * w * d / 324 | 2
out ft3 | Volume | ft³ | l * w * d / 12 | 1

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More in this bed

The whole Tech How-To bed →