sodcalculator

10 Tech How-To

Windows 10 Won’t Boot? Fix It in 30 Minutes

Guide 10-56696 · Updated · Step by step

If your Windows 10 PC won’t boot, the fix usually involves using the built-in Automatic Repair tool, then Startup Repair, and if that fails, a System Restore or command-line fix. This guide walks you through each step in order, from the least invasive to the more advanced, so you can get back to your desktop without reinstalling Windows.

Why Windows 10 Fails to Boot

Windows 10 can fail to start for many reasons, but most fall into a few broad categories. The most common are corrupted system files (often after a failed update or power outage), a faulty driver that loads at startup, a recently installed program that interferes with the boot process, or a hardware problem like a failing hard drive or bad RAM. Less common but still possible are malware infections that damage the boot sector, or a loose cable inside the PC.

Understanding the cause matters because it tells you which fix to try first. If the problem started right after a Windows update, System Restore is your best bet. If it happened after installing new hardware, you might need to check BIOS settings. If the PC randomly stopped booting one day, a corrupted system file is more likely, and the DISM and SFC commands will help.

Step 1: Force Windows to Enter Automatic Repair

When Windows fails to boot twice in a row, it automatically launches the Windows Recovery Environment (WinRE) on the third attempt. If you’re not seeing that, you can force it manually.

  1. Turn on the PC and wait for the Windows logo to appear.
  2. Press and hold the power button for 5-10 seconds to force a shutdown.
  3. Repeat this process two more times. On the third restart, Windows should show the “Preparing Automatic Repair” screen.
  4. Wait for the diagnostic to finish. It may take several minutes.
  5. If the repair succeeds, you’ll boot normally. If not, you’ll see a blue screen with options.

If you never see the blue screen and instead get a black screen with a blinking cursor, or a message like “No bootable device,” the problem is likely hardware-related or the boot configuration is severely damaged. In that case, you’ll need a Windows installation USB drive.

Step 2: Use Startup Repair from the Recovery Environment

Once you’re in the blue Windows Recovery Environment, the first tool to try is Startup Repair. It scans for common problems like missing or corrupted boot files and attempts to fix them automatically.

  1. Click Troubleshoot.
  2. Click Advanced options.
  3. Click Startup Repair.
  4. Select your user account and enter your password if prompted.
  5. Windows will run its diagnostic. This can take 15 minutes or more. It may ask to restart your PC.

Startup Repair fixes issues with the Boot Configuration Data (BCD), the Master Boot Record (MBR), and sometimes corrupted system files. If it reports that it couldn’t repair your PC, don’t give up; the next steps are more targeted.

Step 3: System Restore to Roll Back Recent Changes

If Startup Repair fails, the next best option is System Restore. It returns your PC to a previous state using restore points, which are snapshots of your system files and settings. It does not affect your personal files, but it will remove any programs and drivers installed after the restore point was created.

  1. In the Recovery Environment, go to Troubleshoot > Advanced options > System Restore.
  2. Select your account and enter your password.
  3. Click Next on the System Restore welcome screen.
  4. Choose a restore point from before the boot problem started. If you have multiple, pick the most recent one that predates the issue.
  5. Click Next, then Finish. The restore will take 10-20 minutes and your PC will restart.

If you don’t see any restore points, it means System Protection was disabled on your system drive, or the points were deleted. In that case, you’ll need to use the command-line tools in the next section.

Step 4: Fix Boot Files with Command Prompt

When the graphical tools fail, the command line gives you direct access to repair the boot configuration. This is the most reliable way to fix a corrupted BCD or MBR. From the Recovery Environment, go to Troubleshoot > Advanced options > Command Prompt.

Once the command prompt opens, run the following commands in order, pressing Enter after each:

  • bootrec /fixmbr – rewrites the master boot record
  • bootrec /fixboot – writes a new boot sector
  • bootrec /scanos – scans for installed Windows installations
  • bootrec /rebuildbcd – rebuilds the Boot Configuration Data

After running these, type exit and restart your PC. If you get an error like “Access is denied” on the fixboot command, it usually means the BCD is on a separate system partition. In that case, run bootrec /rebuildbcd first, then try fixboot again.

If the boot files are fine but Windows still won’t start, the problem may be corrupted system files. Run these two commands to check and repair them:

  • sfc /scannow – scans and repairs protected system files
  • DISM /Online /Cleanup-Image /RestoreHealth – repairs the system image that SFC uses

Note that DISM requires internet access to download healthy files from Windows Update. If your PC is offline, it may fail; that’s okay, SFC can still help.

Step 5: Use a Windows Installation USB for Advanced Repairs

If you can’t even get to the Recovery Environment, or the above commands fail, you’ll need a Windows 10 installation USB drive. You can create one on another computer using Microsoft’s Media Creation Tool. This is also the only way to access the recovery tools if your hard drive isn’t recognized at all.

  1. Plug in the USB drive and boot from it. You may need to press a key (like F12, Esc, or Del) during startup to choose the boot device.
  2. Select your language and click Next.
  3. Click Repair your computer in the bottom-left corner instead of “Install now.”
  4. You’ll now see the same Advanced options menu. You can run Startup Repair, System Restore, or Command Prompt from here.

If the USB drive doesn’t show up in the boot menu, enter your BIOS/UEFI settings and enable USB boot, or change the boot order. On modern PCs, you may need to disable Secure Boot temporarily to boot from a USB drive.

Frequently Asked Questions

Will I lose my files if I use these fixes?

Startup Repair, System Restore, and the bootrec commands do not delete personal files. System Restore only removes programs and drivers installed after the restore point. If you need to reinstall Windows, you can choose “Keep my files” during the installation process, but it’s always wise to back up important data if you can access the drive from another PC.

What if I see “No bootable device” or “Invalid partition table”?

This usually means the BIOS isn’t finding a valid operating system on the hard drive. Check that the hard drive is properly connected (both power and data cables), then enter the BIOS and confirm the drive is detected. If it is, run the bootrec commands from a Windows USB. If the drive isn’t detected at all, it may be failing.

Can a Windows update cause a boot loop?

Yes, a failed or interrupted Windows update is a common cause. The update may leave the system in an inconsistent state. System Restore to a point before the update is the most effective fix. If that’s not available, running sfc /scannow and DISM can repair the damage.

How do I boot into Safe Mode if Windows won’t start?

You can’t directly boot into Safe Mode from a black screen, but you can from the Recovery Environment. Go to Troubleshoot > Advanced options > Startup Settings, then click Restart. After the restart, press 4 or F4 to enable Safe Mode. Safe Mode loads only essential drivers, which can help you uninstall a problematic driver or program.

What if the screen stays black but the PC is running?

A black screen with fans spinning often indicates a display issue, not a boot problem. Try connecting a different monitor or cable. If you have a dedicated graphics card, try plugging into the motherboard’s video output. If that works, the GPU may be faulty. Also, try reseating the RAM and graphics card.

Is reinstalling Windows the only option left?

If all repair options fail, reinstalling Windows is a reliable last resort. You can use the installation USB and choose “Custom install.” You’ll lose installed programs, but you can keep your personal files by selecting the partition and choosing “Format” only if you’re willing to lose everything; otherwise, install over the existing Windows without formatting, which moves old files to a Windows.old folder.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →