sodcalculator

10 Tech How-To

Fix PR_CONNECT_RESET_ERROR on Firefox

Guide 10-56688 · Updated · Step by step

If Firefox shows PR_CONNECT_RESET_ERROR, the connection to the website was reset before it could be completed. This is usually caused by a misconfigured proxy, a VPN or firewall, corrupted network settings, or an extension interfering with the connection; the fixes below resolve it in most cases.

What Causes PR_CONNECT_RESET_ERROR

The error code PR_CONNECT_RESET_ERROR is part of Firefox’s Network Security Services (NSS) library. It means the TCP connection to the server was unexpectedly closed by the remote host, a middlebox, or your own system. Unlike a certificate error, this is not about encryption – the connection simply died before data could be exchanged.

Common triggers include:

  • A VPN or proxy service that drops the connection
  • Firewall or antivirus software blocking Firefox
  • Corrupted DNS cache or network settings
  • An extension (especially ad blockers or privacy tools) that interferes
  • Outdated Firefox or operating system network drivers
  • A website that is actually down or blocking your region

Quick Fixes to Try First

Start with the simplest solutions, as they resolve a large percentage of cases.

  1. Reload the page – the error is often transient. Press Ctrl+Shift+R (or Cmd+Shift+R on Mac) for a hard reload.
  2. Restart Firefox – close it completely and reopen. This clears temporary network states.
  3. Restart your router/modem – power cycle it for 30 seconds. This clears network-level resets.
  4. Try another browser – if the site loads in Chrome or Edge, the problem is Firefox-specific; if it fails everywhere, the issue is your network or the site itself.

Disable Proxy and VPN Settings

A misconfigured proxy is a leading cause of this error. Firefox can use system proxy settings, but these may point to a server that is no longer active.

  1. Click the menu (three horizontal lines) > Settings.
  2. Scroll to Network Settings and click Settings.
  3. Select No proxy (or Use system proxy settings if you are behind a corporate proxy).
  4. Click OK and restart Firefox.

If you use a VPN, disconnect it and try the site again. Some VPN servers have unstable connections that reset. If the site works without the VPN, try a different server location or disable the VPN’s “kill switch” feature, which can block connections when the VPN drops.

Clear DNS Cache and Reset Network Stack

Corrupted DNS entries can cause connection resets. Clearing them is safe and often fixes the issue.

On Windows:

  1. Open Command Prompt as Administrator (search “cmd”, right-click, “Run as administrator”).
  2. Type ipconfig /flushdns and press Enter.
  3. Type netsh winsock reset and press Enter.
  4. Type netsh int ip reset and press Enter.
  5. Restart your computer.

On macOS:

  1. Open Terminal (from Applications > Utilities).
  2. Type sudo dscacheutil -flushcache and press Enter.
  3. Enter your password and press Enter.

These commands clear the DNS cache and reset the TCP/IP stack, which can remove stale entries causing resets.

Check Firefox Extensions and Hardware Acceleration

Extensions that modify network requests (ad blockers, VPN extensions, privacy tools) are common culprits. Test by running Firefox in Troubleshoot Mode:

  1. Click the menu > Help > Troubleshoot Mode.
  2. Click Restart in the dialog.
  3. Firefox will open with extensions disabled. Try the site.

If it works, an extension is the problem. Disable them one by one (menu > Add-ons and themes) to find the offender.

Hardware acceleration can also cause issues with some graphics drivers. Disable it via Settings > General > Performance – uncheck “Use recommended performance settings” and then uncheck “Use hardware acceleration when available”. Restart Firefox.

Reset Firefox Network Settings and Refresh Firefox

If the above fail, resetting Firefox’s network settings can help. Navigate to about:support in the address bar. In the Network Settings section, click Clear – this resets all network preferences to defaults.

If the error persists, a Refresh Firefox can fix deeper issues. This removes extensions and restores default settings while keeping your bookmarks, passwords, and open tabs. Go to about:support and click Refresh Firefox.

Advanced: Check Firewall and Antivirus

Firewalls and antivirus software sometimes block Firefox’s connections, especially after updates. Temporarily disable them (or add Firefox to the allowlist) to test. If the site loads, configure the software to allow Firefox.

On Windows, check Windows Defender Firewall: Control Panel > System and Security > Windows Defender Firewall > Allow an app through the firewall. Ensure Firefox is checked for both Private and Public networks.

If you use a third-party antivirus, look for “web protection” or “firewall” settings and add Firefox as an exception. Be careful not to disable your antivirus permanently – only for testing.

Frequently Asked Questions

Does PR_CONNECT_RESET_ERROR mean the website is down?

Not necessarily. It can happen when the site is down, but it more often indicates a problem on your side – proxy, VPN, or firewall. Check if the site loads on another device or browser to isolate the cause.

Will clearing my DNS cache delete my browsing history?

No. Flushing the DNS cache only removes the IP address records your computer has stored temporarily. It does not affect your bookmarks, history, passwords, or cookies.

Why does the error happen only on some websites?

If only specific sites fail, the issue may be with those sites’ servers, or they may be blocking your region or IP. It could also be that those sites use connection settings that conflict with your proxy or firewall.

Can a VPN cause this error even when it’s off?

Yes. Some VPN software installs a virtual network adapter or modifies system proxy settings that remain active even when the VPN is disconnected. Check your network adapter settings and disable any leftover VPN adapters.

Is it safe to use “No proxy” in Firefox?

Yes, for most home users. If you don’t need a proxy (e.g., for a corporate network), setting “No proxy” is safe and can eliminate proxy-related errors. Your internet connection will work directly.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →