sodcalculator

10 Tech How-To

Fix Double NAT by Switching Your Router to AP Mode

Guide 10-56195 · Updated · Step by step

Yes, switching your second router to Access Point (AP) mode is the most direct and reliable fix for a double NAT issue. This turns the second router into a network bridge, so it stops assigning its own private IP addresses and lets your main router handle all routing, which eliminates the conflicting NAT layers.

What Double NAT Actually Is

Double NAT happens when two routers are connected in series, and each one performs Network Address Translation (NAT). Your Internet Service Provider (ISP) modem/router creates one private network (for example, 192.168.1.x). If you plug a second router into it, that second router creates another private network (say, 192.168.0.x). Devices on the second router’s network see the first router as their “internet,” and the first router sees the second router as just another device.

This stacking of private networks is what causes the problems: incoming connections (like game servers, security cameras, or web hosting) cannot find the right device because there are two layers of address translation. Your devices can still reach the internet, but incoming traffic gets lost in the middle. The result is often “Moderate” or “Strict” NAT type in games, failed port forwarding, and unreliable peer-to-peer connections.

Why AP Mode Fixes It

Access Point mode disables the routing functions of the second router—specifically NAT, DHCP, and the firewall. It turns the device into a wireless bridge that simply extends your main network. When you connect to the AP, your device gets an IP address directly from the main router, so there is only one NAT layer.

In practice, this means:

  • Your main router assigns IP addresses to every device, including those connected to the AP.
  • Port forwarding only needs to be set up on the main router, and it will forward traffic to any device on the whole network.
  • All devices appear on the same subnet, so you can share files, printers, and Chromecast devices without compatibility issues.
  • Your NAT type in games typically becomes “Open” or “Type 1” because there is only one translation layer.

Most modern routers have a dedicated AP mode in their settings. When you enable it, the router automatically disables its DHCP server and changes its LAN IP to match the main router’s subnet. Some models even ask you to connect the Ethernet cable to a LAN port instead of the WAN port when in AP mode.

How to Switch to AP Mode (Step by Step)

  1. Log into your second router’s admin page (usually by typing its IP address into a browser).
  2. Look for a setting called “Operation Mode,” “Wireless Router Mode,” or “Access Point Mode.” It is often under the “Advanced” or “System” tab.
  3. Select “Access Point (AP) Mode” and save the change. The router may reboot.
  4. If the router does not have a dedicated AP mode, manually disable the DHCP server and change the LAN IP to an unused address on your main network (for example, if your main router is 192.168.1.1, set the AP to 192.168.1.2).
  5. Connect the second router to the main router using an Ethernet cable. Plug the cable into a LAN port on the main router and a LAN port on the AP (not the WAN/Internet port).
  6. Reconnect your devices to the AP’s Wi-Fi. They should now get IP addresses from the main router.

If your router lacks a visible AP mode option, you can also check the manufacturer’s support page for firmware updates—many models added AP mode in later updates.

What If You Cannot Use AP Mode?

Some older routers or ISP-provided devices do not offer AP mode. In that case, you have a few alternatives:

  • Bridge mode on the main router: If your ISP modem/router is the one causing the double NAT, you can put it in bridge mode so it acts as a pure modem and your second router does all the routing. This is often the cleanest solution when the ISP device is the first in line.
  • Disable DHCP and use a LAN-to-LAN connection: As mentioned in the steps, manually turning off DHCP on the second router and connecting via LAN ports effectively turns it into an AP, even without the named mode.
  • Replace the second router with a switch: If you only need more Ethernet ports, a simple network switch is cheaper and avoids all NAT issues.
  • Use Powerline adapters or MoCA: If you are using the second router to extend Wi-Fi to another room, you can instead use a mesh Wi-Fi system or a dedicated access point, which are designed for this purpose.

Each of these options achieves the same goal: only one device performs NAT on your network.

Common Problems After Switching to AP Mode

Even after switching, you might encounter a few hiccups:

  • Wi-Fi devices still show the old network: Your phone or laptop may keep the old Wi-Fi profile. Forget the network and reconnect, or reboot the devices.
  • The AP’s admin page becomes unreachable: After changing its IP, you may need to find the new IP from your main router’s DHCP client list, or use the default IP that the AP mode assigns (often something like 192.168.1.2).
  • The AP’s Wi-Fi name (SSID) differs from your main router: You can set the same SSID and password on both, but your devices may not roam seamlessly between them. For best results, use a mesh system or a wired AP with the same SSID and a different channel.
  • Port forwarding still does not work: Make sure you are forwarding ports on the main router, not on the AP. Also verify that the device you are forwarding to has a static IP address on the main router’s network.

If you experience intermittent disconnects after the switch, check that the Ethernet cable between the two routers is in good condition and that the AP is not too far from the main router.

AP Mode vs. Bridge Mode vs. Repeater Mode

These terms are often confused, but they mean different things:

  • Access Point (AP) Mode: The device connects to the main router via Ethernet and provides Wi-Fi. It does not route or assign IPs.
  • Bridge Mode: On a modem/router, this disables routing so the device acts as a modem only. On a second router, “bridge mode” often means it becomes a wireless bridge (connects to the main router wirelessly and provides Ethernet ports).
  • Repeater Mode: The device connects wirelessly to the main router and rebroadcasts the signal. It usually halves the bandwidth because it uses the same radio to receive and transmit.

For fixing double NAT, you want AP mode (wired) or a wireless bridge (if you cannot run a cable). A repeater does not fix double NAT because it still creates a separate subnet unless it is configured as a bridge.

Frequently Asked Questions

Will AP mode reduce my internet speed?

No, not if you connect the AP to the main router with a wired Ethernet cable. The AP will deliver the same speed as your main router’s Wi-Fi, limited only by the Wi-Fi standard and the internet plan. If you use a wireless bridge or repeater, you may see a speed drop because the signal is relayed.

Do I need to change the Wi-Fi name (SSID) on the AP?

You can keep it the same or make it different. If you set the same SSID and password, your devices will see one network, but they may not automatically switch to the stronger signal. For seamless roaming, you need a mesh system or a controller-based setup. For most home users, having the same SSID is fine—just manually switch when you move rooms.

Will AP mode disable the firewall on the second router?

Yes, in AP mode the firewall is disabled because the device no longer routes traffic. That is fine because the main router’s firewall still protects your whole network. The AP is essentially a switch with Wi-Fi, and it does not expose your devices to the internet directly.

Can I still use the USB ports and other features on the AP?

That depends on the router. Many routers keep basic features like USB file sharing available in AP mode, but some advanced features (like VPN server or parental controls) may be disabled because they rely on routing. Check your router’s documentation for what is available in AP mode.

What if my main router is also in bridge mode?

If your main router is in bridge mode (acting as a modem), then it does not perform NAT. In that case, you need a separate router to do the routing. If you have two routers and both are in bridge mode, you will have no NAT at all, and your devices may not get internet. Only one device should route.

Is it better to use a dedicated access point instead of a router in AP mode?

For most homes, a router in AP mode works perfectly and saves money. A dedicated access point (like a ceiling-mounted AP) may offer better performance, more simultaneous connections, and cleaner roaming, but it often requires a PoE injector and a controller. If you already have a spare router, AP mode is the most cost-effective fix.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →