sodcalculator

10 Tech How-To

Fix Driver Error Code 32 in Windows 10

Guide 10-44420 · Updated · Step by step

Driver error code 32 in Windows 10 means Windows has stopped the driver for a device because it is not working properly, and the fix is usually to update, reinstall, or roll back the driver. This error appears in Device Manager with a yellow exclamation mark and a message like “A driver (service) for this device has been disabled. An alternate driver may be available.” Below are the exact steps to resolve it, plus what causes it and how to avoid it in the future.

What Does Error Code 32 Mean?

Error code 32 is one of the many Device Manager error codes that Windows uses to report a hardware or driver problem. Specifically, it means the driver service has been disabled—either by the system, by a previous uninstall, or by a user action. The device is still physically connected and detected, but Windows cannot start its driver, so the device won’t work until the driver is re-enabled or reinstalled.

This error is most common with:

  • Network adapters (Wi-Fi or Ethernet)
  • Sound cards and audio devices
  • USB controllers
  • Bluetooth adapters
  • Graphics cards (less often)

In most cases, the device itself is fine—the problem is purely in the driver configuration. That’s why the fixes below are all about resetting or replacing the driver, not replacing hardware.

Why Does Error Code 32 Happen?

Several situations can leave a driver disabled:

  • Driver update failed – A partially installed update can leave the service disabled.
  • Antivirus or system cleanup tools – Some tools mistakenly disable drivers they think are unused or risky.
  • Manual disabling – If you (or a previous user) disabled the device in Device Manager, it stays disabled until re-enabled.
  • Corrupted driver files – A crash or power loss during installation can corrupt the driver files.
  • Registry issues – The driver service entry in the registry can become inconsistent after a failed uninstall.
  • Windows Update conflicts – A Windows update may install a generic driver that conflicts with the manufacturer’s driver.

Because the cause is usually a disabled service, the first fix is simply to re-enable it. If that doesn’t work, you move to reinstalling the driver.

How to Fix Error Code 32 (Step-by-Step)

Try these fixes in order. Most users only need the first one or two.

Fix 1: Enable the Device in Device Manager

  1. Press Windows + X and select Device Manager.
  2. Find the device with the yellow exclamation mark.
  3. Right-click it and select Enable device.
  4. If it’s already enabled, skip to Fix 2.

If the option is grayed out or the device doesn’t re-enable, go to Fix 2.

Fix 2: Uninstall and Reinstall the Driver

  1. In Device Manager, right-click the problem device and select Uninstall device.
  2. In the confirmation dialog, check the box “Delete the driver software for this device” if it appears (this is optional but often helps).
  3. Click Uninstall.
  4. Restart your PC. Windows will automatically detect the device and install a fresh driver.
  5. If Windows doesn’t reinstall it, go to Action > Scan for hardware changes in Device Manager.

Fix 3: Update the Driver Manually

  1. Right-click the device and select Update driver.
  2. Choose Search automatically for drivers.
  3. If no update is found, go to the manufacturer’s website, download the latest driver for your exact model, and run the installer.

Fix 4: Roll Back the Driver

If the error started right after a driver update, roll back:

  1. Right-click the device, select Properties.
  2. Go to the Driver tab.
  3. Click Roll Back Driver (if available).
  4. Follow the prompts and restart.

Fix 5: Use System Restore

If the above fail, restore Windows to a point before the error appeared:

  1. Press Windows + R, type rstrui, press Enter.
  2. Choose a restore point from before the problem started.
  3. Follow the prompts and restart.

What to Do If the Error Persists

If you’ve tried all the above and error code 32 still appears, the problem may be deeper:

  • Check for Windows updates – Go to Settings > Update & Security > Windows Update and install all pending updates.
  • Run the hardware troubleshooter – In Settings > Update & Security > Troubleshoot, run the “Hardware and Devices” troubleshooter.
  • Check the registry – Only if you’re comfortable: open Regedit and navigate to HKLM\SYSTEM\CurrentControlSet\Services, find the driver service name (you can see it in the device’s Properties > Details > Service name), and check that its Start value is not set to 4 (disabled). Set it to 1 or 2 and restart. Editing the registry incorrectly can damage Windows, so back it up first.
  • Use the manufacturer’s diagnostic tool – Many hardware makers offer a diagnostic utility that can reset the device firmware.

If none of this works, the device itself may be failing, especially if it’s an older component. But that’s rare—error code 32 is almost always a software issue.

Common Mistakes When Fixing Error Code 32

  • Not restarting after uninstall – Windows needs a reboot to re-enumerate the device. Skipping the restart can leave the driver half-installed.
  • Using third-party driver updaters – These often install the wrong driver or a beta version. Stick to Windows Update or the manufacturer’s site.
  • Deleting the driver without uninstalling – Deleting the .inf file manually doesn’t remove the service entry; you must use Device Manager.
  • Disabling the device instead of uninstalling – Disabling just sets the service to disabled, which is what caused the error in the first place.

Frequently Asked Questions

Can I fix error code 32 without restarting?

Sometimes you can by using Action > Scan for hardware changes in Device Manager, but a restart is almost always required to fully reinitialize the driver service. If you don’t restart, the error may come back immediately.

Is error code 32 a hardware failure?

No. Error code 32 specifically means the driver is disabled, not that the hardware is dead. In rare cases the hardware can be damaged, but that would usually show a different error (like code 43 or 10).

Why does my USB device keep getting error code 32?

USB devices often get this error after a Windows update changes the USB controller driver. Uninstalling the device and letting Windows reinstall it usually fixes it. Also check if the USB port itself is working by plugging the device into another port.

Will reinstalling Windows fix error code 32?

It would, because a clean install resets all driver services. But it’s a drastic step. Try the fixes above first—most users resolve it in minutes without reinstalling.

Can I ignore error code 32 if the device seems to work?

If the device works despite the error, it may be using a fallback driver. Still, it’s best to fix it because the disabled service can cause problems later, such as the device stopping after sleep or a Windows update.

Does error code 32 affect system performance?

Not directly. It only affects the specific device. However, if the device is a network adapter or a storage controller, you may notice slow performance or missing features until it’s fixed.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →