If your USB ports stop working right after upgrading to Windows 10, the fix is usually reinstalling or updating the USB controller drivers in Device Manager, or disabling the fast startup power setting. Start with the driver reinstall—it resolves the majority of cases within a few minutes, and you can do it even if your keyboard and mouse are unresponsive by using Safe Mode or a PS/2 port.
Why Windows 10 Upgrades Break USB Ports
When you upgrade to Windows 10, the installer replaces the old operating system files but sometimes keeps legacy drivers that conflict with the new USB stack. Windows 10 uses a different set of USB drivers (usbxhci.sys for USB 3.x) than Windows 7 or 8. If the upgrade doesn’t cleanly migrate these, the ports may show as “Unknown USB Device” or simply not power connected devices.
Another common culprit is the power management setting called “USB selective suspend.” It’s designed to save battery by cutting power to idle ports, but after an upgrade it can misbehave and leave ports dead until you restart. Fast Startup, a hybrid shutdown feature, can also leave the USB controller in a half-initialized state.
Fix 1: Reinstall the USB Controller Driver
This is the first thing to try because it’s quick and works for most people.
- Press Windows + X and select Device Manager.
- Expand Universal Serial Bus controllers.
- Right-click each entry that says Host Controller or Root Hub and choose Uninstall device.
- Check the box Delete the driver software for this device if it appears.
- Restart your computer. Windows will automatically reinstall the correct drivers.
If you can’t use your keyboard or mouse because they’re USB, you have two options: plug them into a PS/2 port if your motherboard has one, or boot into Safe Mode (hold Shift while clicking Restart, then go to Troubleshoot > Advanced options > Startup Settings). In Safe Mode, Windows uses basic drivers, so your USB devices usually work long enough to complete the steps.
Fix 2: Disable Fast Startup
Fast Startup is a hybrid shutdown that saves kernel state to disk. It can leave USB controllers in a dormant state after an upgrade.
- Open Control Panel > Power Options.
- Click Choose what the power buttons do on the left.
- Click Change settings that are currently unavailable.
- Uncheck Turn on fast startup (recommended).
- Click Save changes and restart.
This is a safe setting to disable permanently—it only adds a few seconds to boot time. Many users report that USB ports work fine after this change alone.
Fix 3: Update Chipset and BIOS Drivers
If reinstalling the controller driver doesn’t help, the issue may be deeper—in the chipset driver or the BIOS/UEFI firmware. Windows 10 upgrade often doesn’t update these automatically.
- Go to your motherboard or laptop manufacturer’s support page.
- Download the latest Chipset driver and BIOS/UEFI update for your exact model.
- Install the chipset driver first, then reboot.
- If a BIOS update is available, follow the manufacturer’s instructions carefully—do not interrupt the process.
BIOS updates can add USB compatibility fixes for Windows 10. Only download from the official manufacturer site, not from third-party driver updater tools.
Fix 4: Check Power Management Settings
Windows can turn off USB devices to save power, and after an upgrade this setting sometimes becomes too aggressive.
- Open Device Manager and expand Universal Serial Bus controllers.
- Right-click each Root Hub and select Properties.
- Go to the Power Management tab.
- Uncheck Allow the computer to turn off this device to save power.
- Click OK and repeat for all Root Hubs.
Also check the USB selective suspend setting: go to Power Options > Change plan settings > Change advanced power settings, expand USB settings > USB selective suspend setting, and set it to Disabled for both battery and plugged in.
Fix 5: Use Windows Troubleshooter and Check Hardware
Windows has a built-in troubleshooter for hardware and devices:
- Open Settings > Update & Security > Troubleshoot.
- Select Hardware and Devices and run it.
- Follow the prompts—it may detect a driver conflict or power issue.
If all software fixes fail, test your USB ports with a known-good device (like a phone charger) to see if they provide power. If not, the upgrade may have triggered a hardware failure—this is rare but possible, especially on older machines. Try booting from a USB stick with a live Linux distribution; if the ports work there, it’s definitely a Windows driver issue.
Frequently Asked Questions
Why do my USB ports work in BIOS but not in Windows?
That points to a driver problem, not hardware. The BIOS uses its own basic USB driver, so if ports work there, the physical ports are fine. Windows is failing to load the correct USB controller driver—reinstall the controller in Device Manager as described above.
Can I fix USB ports without a keyboard or mouse?
Yes. Boot into Safe Mode (hold Shift while clicking Restart from the login screen, or force restart three times to trigger recovery). Safe Mode loads basic drivers, so USB input usually works. If not, use a PS/2 keyboard or mouse if your computer has those ports.
Will a clean install of Windows 10 fix USB issues?
Usually yes. A clean install replaces all drivers and removes any leftover conflicts from the upgrade. Back up your data first, and make sure you have the product key. It’s the most thorough fix, but it takes longer and requires reinstalling your programs.
Why does only one USB port stop working?
If only a specific port fails, it might be a physical issue (bent pin, dust) or the port is on a separate controller that didn’t get the right driver. Try a different device in that port, and if it still fails, check if the port works in BIOS. If not, it’s likely hardware.
Is it safe to disable fast startup permanently?
Yes. It only affects shutdown speed. Your computer will still shut down and start normally, just a few seconds slower. It doesn’t affect data or system stability.
Do I need to reinstall USB drivers after every Windows update?
No. Once the correct drivers are installed, they usually survive feature updates. If a future update breaks USB again, repeat the reinstall steps—it’s a known occasional issue with major Windows releases.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Create App Shortcuts in Windows 10 Start Menu
- How to Rename a SQL Server Database
- Fix Google Calendar Not Syncing on iPhone
- Fix Skype Microphone Not Working on Windows
- Google Docs Landscape: Change Page Orientation
- Recover Deleted Admin Account in Windows 11