sodcalculator

10 Tech How-To

Fix Microsoft Edge Warning Alerts (Step-by-Step)

Guide 10-53257 · Updated · Step by step

Microsoft Edge warning alerts, often called “potentially unwanted app” or “dangerous site” warnings, usually appear when the browser’s SmartScreen filter detects something it considers risky. The fix depends on the type of alert: for a false positive on a site you trust, you can click “Details” then “Go to this site anyway”; for alerts caused by unwanted extensions or settings, you need to clear your browsing data or reset the browser. This guide explains each scenario and walks you through the exact steps.

Why Edge Shows Warning Alerts

Edge uses Microsoft Defender SmartScreen, a built-in security feature that checks every site and download against a constantly updated list of known threats. When you visit a page or download a file, SmartScreen compares it to this list and also runs heuristic analysis to spot new threats. Alerts appear in different forms:

  • Red warning page – “This site has been reported as unsafe” – blocks the entire page.
  • Yellow or blue bar – “This download is potentially dangerous” – lets you decide whether to keep the file.
  • Pop-up notification – “Microsoft Edge is trying to open a new window” – usually triggered by a site or extension, not SmartScreen.
  • In-page banner – “This extension is slowing down your browser” – related to performance, not security.

Most alerts are legitimate and you should not bypass them unless you are certain the site is safe. However, false positives do happen, especially with small or newly created websites, or when a download is misidentified as a potentially unwanted app (PUA).

How to Fix a False Positive on a Website

If you trust a site and believe the warning is wrong, you can proceed with caution. The exact wording varies by Edge version, but the steps are the same:

  1. On the red warning page, click Details (or “More information”).
  2. Click Go to this site anyway (or “Visit this site”).
  3. If prompted, confirm that you understand the risk.

Edge will remember your choice for that specific page for a short time, but it may warn again on your next visit. To permanently allow a site, you can add it to your Edge Security exceptions, though this is not recommended for unknown sites. To do that:

  1. Go to Settings (three dots menu) → Privacy, search, and services.
  2. Scroll to Security and click Manage SmartScreen for Microsoft Edge.
  3. Under Exceptions, click Add and enter the site’s URL.

Fixing Alerts from Downloads

When you download a file, Edge may show “Microsoft Defender SmartScreen prevented an unrecognized app from starting” or “This file is not commonly downloaded.” These alerts are common for new or unsigned software. To keep the file:

  1. In the download notification, click the arrow next to the file name.
  2. Select Keep (or “Keep anyway”).
  3. If a second prompt appears, click Show more then Keep anyway.

If the download is blocked entirely, you may need to temporarily disable SmartScreen in Edge settings, but only if you are 100% sure the file is safe. To do that:

  1. Go to Settings → Privacy, search, and services.
  2. Scroll to Security and turn off Microsoft Defender SmartScreen.
  3. Download the file, then turn SmartScreen back on immediately.

This is a temporary workaround, not a permanent solution. Leaving SmartScreen off exposes you to real threats.

Removing Unwanted Extensions That Cause Alerts

Some Edge alerts are actually caused by malicious or unwanted extensions that you may have installed accidentally. These extensions can trigger pop-ups, redirect you to ads, or even try to install other software. To check and remove them:

  1. Click the three dots menu → Extensions → Manage extensions.
  2. Review the list. Look for extensions you don’t remember installing, or ones with odd names.
  3. Toggle off any suspicious extension, then click Remove to delete it.

If you see an extension that you cannot remove (the Remove button is greyed out), it may be installed by your organization or by another program. In that case, run a full antivirus scan and check your installed programs list for anything unfamiliar.

Resetting Edge to Stop Persistent Alerts

If alerts keep appearing even after removing extensions and clearing data, a full reset of Edge often fixes the problem. This restores default settings, disables all extensions, and clears temporary data – but it does not delete your bookmarks, history, or saved passwords. To reset:

  1. Go to Settings → Reset settings.
  2. Click Restore settings to their default values.
  3. Click Reset to confirm.

After the reset, Edge will close and reopen. You’ll need to re-enable any extensions you actually use. If the alerts persist after a reset, the problem is likely on your system – run a full malware scan with Windows Defender or a trusted third-party tool.

Common Misconceptions About Edge Alerts

One widespread myth is that Edge’s SmartScreen is the same as Windows Defender Antivirus. They are separate: SmartScreen is a browser feature that checks websites and downloads, while Defender Antivirus scans your whole system. Disabling SmartScreen does not disable your antivirus, but both are important.

Another misconception is that every warning means your computer is infected. Often it just means the site or file is new or has a low reputation. However, you should never ignore a warning just because it’s inconvenient – real malware can hide behind a convincing page.

Also, some users think that using “InPrivate” mode (Incognito) bypasses SmartScreen. It does not – SmartScreen runs in all modes, and InPrivate only prevents saving history.

When to Just Leave the Alert Alone

If the warning is about a site you have never heard of, or a download from an unfamiliar source, the safest choice is to close the page or delete the file. Legitimate sites rarely trigger SmartScreen, and the few seconds it takes to find an alternative source is worth the peace of mind. If you are a website owner and your own site is being flagged, you can submit a review request to Microsoft through the Microsoft Defender SmartScreen submission page – this is a public process and can take a few days.

Frequently Asked Questions

Why does Edge keep showing “This site has been reported as unsafe”?

This means SmartScreen has a record of the site being involved in phishing, malware, or other harmful activity. It could be a false positive, but it’s more likely that the site is genuinely risky. If you own or trust the site, you can report a false positive to Microsoft, or temporarily bypass the warning as described above.

How do I turn off SmartScreen in Edge?

Go to Settings → Privacy, search, and services → Security, and toggle off “Microsoft Defender SmartScreen.” This disables both site and download warnings. It’s not recommended to keep it off, but you can turn it back on at any time.

Will resetting Edge delete my bookmarks?

No, a reset keeps your bookmarks, history, and saved passwords. It only restores default settings, disables extensions, and clears temporary data like cookies and cache. Your personal data is untouched.

What is the difference between a warning and a pop-up notification?

A warning is a full-page block or download notification from SmartScreen. A pop-up notification like “Microsoft Edge is trying to open a new window” is usually triggered by a website or extension, not SmartScreen. To stop those, check your extensions and site permissions.

Can I add a safe site to the allowlist?

Yes, you can add a site to the SmartScreen exceptions list in Edge settings. This prevents future warnings for that exact URL. Be careful: if the site is compromised later, you won’t be warned.

Why does Edge warn about a file I downloaded myself?

SmartScreen checks the file’s reputation, not just its origin. If the file is new, unsigned, or downloaded from a less common source, it may be flagged as “unrecognized app.” This is a precaution, not a guarantee of danger. You can choose to keep the file if you trust the source.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →