Error code MW1 in Monster Hunter World typically appears when the game fails to connect to Capcom’s online servers, blocking you from joining or hosting multiplayer sessions. The fix usually involves resetting your network connection, adjusting DNS settings, or verifying the game’s files, and this guide walks you through each solution in order of likelihood.
What Error Code MW1 Means
MW1 is a generic network error that Monster Hunter World displays when the game cannot establish or maintain a connection to the online session servers. It is not a crash or a corrupted save file — it is a connectivity failure. The error can occur at the title screen, when searching for sessions, or mid-hunt when the connection drops. Capcom’s support documentation groups MW1 with other “MW” errors (MW1, MW2, MW4) as server communication failures, but MW1 specifically points to a timeout during the initial handshake between your console or PC and the game’s matchmaking service.
Unlike error codes that indicate a ban or a version mismatch, MW1 does not mean your account is flagged or that your game is out of date. It is almost always a local network issue, a regional server outage, or a conflict with your router’s security settings. Because the error is so broad, the troubleshooting steps below are designed to eliminate the most common causes first.
Why MW1 Happens: Common Causes
Several distinct issues can produce the same error code, which is why no single fix works for everyone. The most frequently reported causes include:
- NAT type restrictions — Monster Hunter World requires a moderate or open NAT to join other players. A strict NAT will block the peer-to-peer connections the game uses for quests.
- DNS resolution failures — Your ISP’s default DNS may be slow or unable to resolve Capcom’s server addresses, causing timeouts.
- Router firewall or UPnP disabled — The game needs certain ports open, and if UPnP is off or the firewall blocks them, MW1 appears.
- Server-side outages — Capcom’s servers occasionally go down for maintenance or due to regional issues, and no local fix will help until they return.
- Corrupted game cache or files — On PC, a damaged installation can cause the game to fail when loading online components.
Understanding which cause applies to your situation will save time. If the error started suddenly after a router change, the problem is likely local. If it happens at the same time for friends in your region, check Capcom’s server status first.
Fix 1: Restart Your Network Hardware
The simplest fix often works because it clears temporary IP assignments and re-establishes the connection. Do a full power cycle of your modem and router:
- Turn off your console or PC.
- Unplug the power from both your modem and router.
- Wait 60 seconds.
- Plug the modem back in and wait until it fully boots (all lights stable).
- Plug the router back in and wait for it to connect.
- Turn on your device and launch Monster Hunter World.
This clears the router’s ARP cache and forces a fresh DHCP lease. It also resolves the common issue where your device was assigned an IP address that conflicts with another device on the network.
Fix 2: Change Your DNS to a Public Server
If a restart doesn’t help, your ISP’s DNS may be the bottleneck. Switching to a public DNS like Google’s (8.8.8.8 and 8.8.4.4) or Cloudflare’s (1.1.1.1) can fix slow resolution and some routing issues. The steps differ slightly by platform:
- PlayStation 5/4: Settings → Network → Set Up Internet Connection → choose your connection → Manual → set DNS to 8.8.8.8 and 8.8.4.4.
- Xbox Series X/S/One: Settings → Network → Network settings → Advanced settings → DNS settings → Manual → enter 8.8.8.8 and 8.8.4.4.
- PC (Windows): Settings → Network & Internet → Change adapter options → right-click your adapter → Properties → Internet Protocol Version 4 (TCP/IPv4) → Properties → Use the following DNS server addresses → enter 8.8.8.8 and 8.8.4.4.
After changing DNS, restart your device and test the connection. This is a permanent, safe change — public DNS servers are run by reputable companies and are generally faster than ISP defaults.
Fix 3: Enable UPnP or Forward Ports
Monster Hunter World uses specific ports for online play. If UPnP (Universal Plug and Play) is disabled on your router, the game cannot automatically open these ports, leading to MW1. First, check if UPnP is enabled:
- Log into your router’s admin page (usually at 192.168.1.1 or 192.168.0.1).
- Find the UPnP setting — it is often under “Advanced” or “NAT” settings.
- Enable it and save the changes.
- Reboot your router and console/PC.
If UPnP is already on or your router doesn’t support it, you can manually forward the ports. The ports Capcom uses for Monster Hunter World are:
- TCP: 80, 443, 27015, 27036
- UDP: 27015, 27031-27036
Forward these to the local IP address of your console or PC. You will need to set a static IP for your device first, otherwise the port forward will break when the IP changes. Manual port forwarding is more reliable than UPnP, but it requires more setup.
Fix 4: Check NAT Type and Router Settings
Even with UPnP enabled, your router’s NAT mode can block connections. Monster Hunter World requires NAT Type 2 (moderate) or Type 1 (open) on PlayStation, and Open NAT on Xbox. A strict NAT (Type 3 on PlayStation, Strict on Xbox) will cause MW1. To check your NAT type:
- PlayStation: Settings → Network → View Connection Status → NAT Type.
- Xbox: Settings → Network → Network settings → Test NAT type.
- PC: There is no built-in NAT test, but you can check your router’s status page.
If your NAT is strict, try these router changes:
- Enable “Game Mode” or “Gaming” profile if your router has one.
- Disable SIP ALG (often breaks game connections).
- Place your console/PC in the DMZ (demilitarized zone) as a temporary test — this exposes the device to the internet, so only use it for diagnosis and revert it after.
If DMZ fixes the issue, your router’s firewall is too aggressive. Keep the DMZ off and instead forward the specific ports listed above.
Fix 5: Verify Game Files (PC Only)
On PC, a corrupted installation can cause MW1 even if your network is fine. Steam and Microsoft Store both have a file verification tool:
- Steam: Right-click Monster Hunter World in your library → Properties → Local Files → Verify integrity of game files.
- Microsoft Store: Open the Xbox app → Settings → General → Repair/Reset the game, or use the “Repair” option in Windows Settings → Apps → Monster Hunter World.
Verification scans all game files and replaces any that are damaged or missing. This can take a few minutes, but it is a common fix for PC players who see MW1 after a partial update or an interrupted download.
Fix 6: Check Server Status and Maintenance
If none of the above work, the problem may be on Capcom’s side. Monster Hunter World’s servers are periodically taken offline for maintenance, and during those windows, MW1 is expected. You can check server status on Capcom’s official support page or the game’s official Twitter/X account. If the servers are down, wait a few hours and try again — no local fix will help.
Also note that Monster Hunter World’s online services are region-based. If you are playing in a region with a small player base, you may see MW1 when the matchmaking server is under heavy load. In that case, try changing your download region in Steam (if on PC) or your console’s region settings, but be aware that this can affect matchmaking latency.
Frequently Asked Questions
Does error MW1 mean I’m banned?
No. MW1 is a network connectivity error, not a ban. Bans are typically communicated with a different message or error code, and they do not prevent you from connecting to the server entirely — they block you from specific features. If you see MW1, it is almost always a network issue.
Will using a VPN fix MW1?
Sometimes. A VPN can bypass ISP routing issues or strict NAT problems by routing your traffic through a different server. However, it can also increase latency and may trigger anti-cheat measures on PC. Use a VPN only as a last resort, and choose a server close to your physical location to minimize lag.
Why does MW1 happen only when I join a friend’s session?
This usually indicates a NAT incompatibility between your network and your friend’s. One of you likely has a strict NAT, which prevents a direct peer-to-peer connection. Check both NAT types and have the person with the strict NAT fix it using the steps above.
Can I play offline to avoid MW1?
Yes, Monster Hunter World has a fully playable offline mode. You can play the entire story solo, and you will not encounter MW1 because the game does not attempt to connect to online servers. However, you will miss out on multiplayer quests and events that require an online connection.
Does reinstalling the game fix MW1?
Reinstalling is rarely necessary for MW1 because the error is network-related, not game-data-related. Only try a reinstall if you have already verified game files (on PC) and the issue persists, and only if you suspect a corrupted installation. On consoles, a reinstall can sometimes clear a corrupted cache, but it is a time-consuming last resort.
Is MW1 related to my internet speed?
No. MW1 is about connection stability and NAT, not raw bandwidth. Even a very slow connection can play online if the NAT is open and the connection is stable. A fast connection with a strict NAT will still fail.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Create App Shortcuts in Windows 10 Start Menu
- How to Rename a SQL Server Database
- Google Docs Landscape: Change Page Orientation
- Recover Deleted Admin Account in Windows 11
- Install Custom Recovery on Samsung Galaxy E5
- Fix Administrator Blocked You From Running This App Error