If your Mac’s sound has suddenly stopped working, the fix is usually a quick settings check or a simple reset. Start by verifying the output device in System Settings, then check the volume and mute state; if that doesn’t work, restart the core audio process or your Mac. Below is a complete troubleshooting guide covering the most common causes and solutions.
Check the Basics First
Before diving into deeper fixes, rule out the obvious. Click the Control Center icon in the menu bar and look at the Sound module. Make sure the volume slider isn’t at zero and that the speaker icon isn’t muted (a slash through it). Also, check if you’ve accidentally connected a Bluetooth device like headphones or a speaker that has no audio playing. If you see a Bluetooth output selected, switch it back to “MacBook Speakers” or your external speakers.
If the volume is fine but you still hear nothing, try playing audio from a different app (like Apple Music or a YouTube video) to rule out a single app’s mute setting. Some apps have their own volume controls that can be turned down independently.
Verify the Output Device in System Settings
macOS can sometimes get stuck on a wrong output device. Go to System Settings > Sound > Output (on older macOS versions, it’s System Preferences > Sound > Output). Look at the list of devices. If your Mac’s built-in speakers are not selected, click them. If they are selected but still no sound, try selecting a different device (like a USB audio interface) and then switch back—this often “wakes up” the audio driver.
Also, check the Input tab to ensure your microphone isn’t selected as the output (a rare but possible mix-up). The output device list will show a checkmark next to the active one. If you see “No output devices found,” that points to a deeper driver issue, which we’ll address below.
Restart Core Audio (The macOS Audio Service)
macOS runs a background process called coreaudiod that manages all audio. If it crashes or hangs, you’ll have no sound at all. Restarting it is safe and takes only a few seconds. Here’s how:
- Open Activity Monitor (in Applications > Utilities).
- Type “coreaudiod” in the search box (top-right corner).
- Select the process (it may be named “coreaudiod” or “Core Audio”) and click the X button in the toolbar.
- Click Force Quit in the confirmation dialog. The process will automatically restart.
Alternatively, you can use Terminal: type sudo killall coreaudiod and press Enter. Enter your admin password when prompted. The process restarts instantly, and your sound should return. This fix resolves about 70% of sudden audio failures.
Reset the NVRAM/PRAM (Intel Macs Only)
On Intel-based Macs, audio settings are partially stored in NVRAM (non-volatile random-access memory). Resetting it can clear corrupted audio output settings. Here’s the classic method:
- Shut down your Mac.
- Turn it on and immediately press and hold Option + Command + P + R for about 20 seconds.
- Release the keys after you hear the startup sound a second time (or see the Apple logo appear and disappear twice on newer models).
For Apple Silicon (M1/M2/M3) Macs, NVRAM reset isn’t possible—the system resets automatically during startup. If you have an M-series chip and suspect NVRAM issues, simply restarting your Mac in Safe Mode (see below) can clear temporary audio glitches.
Boot into Safe Mode and Test
Safe Mode loads only essential drivers and disables third-party extensions. If your sound works in Safe Mode, a third-party app or driver is causing the conflict. To enter Safe Mode:
- Apple Silicon: Shut down, then press and hold the power button until “Loading startup options” appears. Select your startup disk, then press and hold Shift and click Continue in Safe Mode.
- Intel: Restart and immediately hold the Shift key until the login window appears.
Once in Safe Mode, try playing audio. If it works, restart normally—this often clears the issue. If it still fails, the problem is likely hardware or a system-level audio driver, not a third-party app.
Check for Hardware Issues
If software fixes fail, you may have a hardware problem. Start by checking the obvious: if you’re using external speakers or headphones, plug them into a different device to confirm they work. For built-in speakers, try the following:
- Use the Apple Diagnostics tool (hold D at startup on Intel, or Option+D for network-based). It can detect some hardware failures.
- Look for debris in the headphone jack (if your Mac has one). A dirty jack can trigger the “headphones plugged in” detection, which silently disables the internal speakers. Clean it gently with a dry cotton swab.
- If your Mac has multiple audio outputs (e.g., HDMI, USB-C), test each one. If only one port fails, it’s a port issue, not the main audio board.
If you suspect a hardware fault, contact Apple Support or an authorized service provider. Do not attempt to open the Mac yourself—it’s easy to damage the logic board.
Frequently Asked Questions
Why is my Mac muted but the volume slider is up?
This usually happens when a Bluetooth device is connected but not playing audio. Go to Control Center > Sound and check the output device. If you see a Bluetooth device, click the speaker icon to switch back to built-in speakers. Also, check the app’s own mute button—some apps have independent mute toggles.
How do I fix no sound after a macOS update?
Updates can reset audio preferences. First, try restarting your Mac. If that fails, go to System Settings > Sound > Output and reselect your speakers. If the issue persists, restart coreaudiod as described above. In rare cases, a full shutdown (not just restart) can clear update-related glitches.
Can a virus cause no sound on a Mac?
Malware is unlikely to cause audio failure, but some adware can hijack audio settings. If you suspect an infection, run a scan with a reputable antivirus tool. However, the steps above (especially Safe Mode) will usually identify if a third-party process is interfering.
Why does my Mac show “No output devices found”?
This indicates the audio driver isn’t loading. Restart coreaudiod via Terminal (sudo killall coreaudiod). If that doesn’t work, reset NVRAM (Intel) or restart in Safe Mode (Apple Silicon). If the message persists after a reboot, it’s likely a hardware failure—contact Apple Support.
Does resetting the SMC fix sound issues?
The System Management Controller (SMC) manages power and some hardware, including audio on Intel Macs. Resetting it can help if the sound issue is related to power management, but it’s not a first-line fix. Try the steps above first. On Apple Silicon, there’s no SMC reset—just restart the Mac.
Why is my Mac’s sound distorted or crackling?
Distortion often comes from a sample rate mismatch. Go to Audio MIDI Setup (in Applications > Utilities), select your output device, and change the format to 44.1 kHz or 48 kHz (CD quality). Also, check if the volume is too high—clipping can cause crackling. If it persists, try a different app to rule out software.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to View Wi-Fi Password on iPhone
- How to Stream on Twitch from PC
- GTM vs Facebook Pixel: What’s the Difference?
- Windows 10 Won’t Boot? Fix It in 30 Minutes
- Ubuntu 26.04 LTS Requirements & Hardware Checks
- ATK0100 Driver: Do You Need to Install It?