Epson printer error 0x97 is a hardware-related fault that typically appears as “Printer error. Turn the printer off and then on again.” It affects several inkjet models and usually indicates a stuck paper jam, a foreign object inside the printer, or a failed internal component. The fix ranges from a simple power cycle to replacing the printhead or main board, and this guide walks you through each step in order of likelihood and cost.
What Does Error 0x97 Mean?
Error 0x97 is an internal hardware error code that Epson printers display when they detect a mechanical or electrical fault. Unlike software errors that clear with a driver reinstall, 0x97 often points to a physical issue. Common triggers include:
- Paper jam or crumpled paper stuck in the rollers
- Foreign objects (e.g., staples, paper clips, bits of label) inside the paper path
- Ink cartridge carriage obstruction or a broken timing strip
- Failed printhead, main board, or power supply
The error is not model-specific; it has been reported on EcoTank, WorkForce, and Expression series printers. It may appear intermittently at first, then become persistent.
Before You Start: Safety and Preparation
Unplug the printer from the wall outlet and wait at least 30 seconds before opening any covers. This discharges capacitors and prevents accidental movement of the printhead. If the printer has been running, let it cool down for 10–15 minutes. Have a flashlight, tweezers, and a soft lint-free cloth ready. Do not use compressed air inside the printer, as it can push debris deeper into the mechanism.
Step-by-Step Fixes for Error 0x97
1. Power Cycle the Printer
Turn off the printer using its power button. If it does not respond, unplug it directly. Wait 60 seconds, then plug it back in and turn it on. This resets the printer’s internal state and clears temporary glitches. If the error persists, move to the next step.
2. Clear Any Paper Jams
Open the front and rear access panels. Gently pull out any paper you see, but do not pull against resistance—you may tear it and leave fragments inside. Check the duplexer (rear) and the output tray. Use a flashlight to look for small bits of paper that might be stuck between rollers. If you find torn pieces, use tweezers to remove them carefully.
3. Remove Foreign Objects
Inspect the paper path for staples, paper clips, or sticky labels. These can catch on the rollers and cause the carriage to stop unexpectedly. If you find a label, peel it off slowly. Check the area under the printhead carriage—sometimes a small object can wedge there.
4. Reset the Printer by Holding the Power Button
Some Epson models respond to a deeper reset: with the printer off, press and hold the power button for 10–15 seconds, then release. This forces a hardware reset. If the error light blinks in a pattern, note the pattern (e.g., two blinks, pause) and consult your manual—it can indicate the specific component.
5. Check the Printhead Carriage
If the carriage is stuck on the left or right side, gently move it by hand to the center. Do not force it. Look for any obstruction along the carriage rail. If the carriage moves freely but the error persists, the issue may be the encoder strip—a thin plastic strip with markings that the carriage reads to know its position. If it is dirty or dislodged, clean it with a damp cloth and ensure it sits correctly in its slot.
6. Reinstall Ink Cartridges or Refillable Tanks
For cartridge-based printers, remove each cartridge and reinsert it firmly. For EcoTank models, ensure the ink tank caps are closed and the tubes are not kinked. A loose cartridge can cause the carriage to stall and trigger 0x97.
7. Update Firmware
Epson occasionally releases firmware updates that address error codes. Visit the official Epson support site, enter your model, and download the latest firmware. Install it via USB (not Wi-Fi) if possible. This is a long shot but worth trying before hardware replacement.
When the Fix Requires Professional Repair
If you have tried all the above and the error persists, the likely culprits are:
- Failed printhead: The printhead may have shorted or mechanically failed. Replacing it is possible on some models but requires disassembly and is often not cost-effective.
- Main board failure: A logic board fault can cause 0x97. This usually requires a professional technician.
- Power supply issue: A failing power supply can cause intermittent errors. Testing this requires a multimeter and is best left to a repair shop.
For out-of-warranty printers, compare the repair cost against a new printer. Often, a mid-range Epson printer costs less than a main board replacement.
Common Misconceptions About Error 0x97
“It’s a software problem.” While a driver reinstall may clear other errors, 0x97 is almost always hardware. Reinstalling drivers will not fix a stuck roller.
“Turning it off and on again always works.” This only works for temporary glitches. If the error is due to a physical obstruction, it will reappear.
“You need to replace the whole printer.” Not always—simple jams or foreign objects are fixable at home. But if the main board is faulty, replacement is often more expensive than a new printer.
How to Prevent Error 0x97
- Use paper that is not wrinkled, damp, or folded.
- Remove staples and paper clips before loading paper.
- Keep the printer covered when not in use to prevent dust and debris from entering.
- Run a nozzle check periodically to keep the printhead healthy.
- Avoid overloading the paper tray—stick to the capacity indicated on the tray.
Frequently Asked Questions
Can error 0x97 be fixed by resetting the printer?
Sometimes. A full power cycle (unplug for 60 seconds) clears temporary glitches. If the error is due to a jam or obstruction, resetting alone won’t fix it—you must also clear the physical issue.
Does error 0x97 mean my printer is dead?
Not necessarily. Many users have fixed it by removing a stuck paper clip or cleaning the encoder strip. Only if the error persists after thorough cleaning and resetting does it indicate a serious hardware failure.
How much does it cost to repair error 0x97?
If you do it yourself, it costs nothing. If you take it to a repair shop, you might pay for diagnostic time plus parts. For a main board replacement, the cost can exceed $100, which is often more than a new printer.
Is error 0x97 covered under warranty?
If your printer is within the warranty period and the error is not due to physical damage or misuse, it should be covered. Contact Epson support with your model and serial number. They may ask you to perform troubleshooting steps first.
Can I continue printing with error 0x97?
No. The printer will not function until the error is resolved. Continuing to press buttons may cause the carriage to slam against an obstruction, causing further damage.
Why does error 0x97 appear after a paper jam?
Because the jam may have left paper fragments or misaligned the carriage. Even after you remove the visible paper, tiny pieces can remain. Thoroughly inspect the paper path and rollers.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Fix Text Cursor Turning White in Windows 11
- Force Quit Non-Responding Apps on Mac: 6 Ways
- Chromebook Not Charging? Fix It Fast
- iPhone Won’t Make Calls but Texts Work? Fixes
- Android to iPhone Hotspot: Connect & Fix Issues
- How to Refresh or Factory Reset Your Microsoft Surface