If you see “The startup options on this PC are configured incorrectly” with BitLocker on Windows 10, the fix is to disable and re-enable BitLocker or reset the TPM, then re-encrypt the drive. This error usually appears after a Windows update, a BIOS/UEFI change, or a failed BitLocker repair, and it blocks normal boot until you enter your recovery key.
Why This Error Appears
BitLocker ties encryption to the Trusted Platform Module (TPM) chip on your motherboard. The TPM stores a hash of the boot configuration (firmware settings, boot order, secure boot state). If anything in that chain changes—like a Windows feature update, a BIOS update, or a dual-boot setup modification—the TPM no longer recognizes the boot environment, and BitLocker assumes the drive may have been tampered with.
Windows 10 then shows the “startup options on this PC are configured incorrectly” message and asks for the 48-digit recovery key. This is a security feature, not a hardware failure. The drive is still encrypted and intact; the system just refuses to unlock it automatically.
What You Need Before You Start
- Your BitLocker recovery key (48 digits). Find it at
https://account.microsoft.com/devices/recoverykeyif you saved it to your Microsoft account, or in Active Directory if this is a work device. - Administrator access to Windows, because most fixes require elevated commands.
- A backup of any important files on the system drive, just in case a step goes wrong.
Fix 1: Suspend BitLocker Temporarily
The quickest fix is to suspend BitLocker protection, which tells Windows to skip the TPM check on the next boot. This does not decrypt the drive—it just opens it without verifying the boot configuration.
- Boot into Windows using your recovery key if needed.
- Open an elevated Command Prompt: right-click Start, choose “Command Prompt (Admin)” or “Windows PowerShell (Admin)”.
- Type
manage-bde -protectors -disable C:(replace C: with your system drive letter) and press Enter. - Restart your PC. Windows should boot normally.
- Once booted, re-enable protection with
manage-bde -protectors -enable C:.
If the error returns after a reboot, the boot configuration is genuinely different. Move to Fix 2.
Fix 2: Reset the TPM
Resetting the TPM clears the stored boot measurements and forces BitLocker to accept the current configuration. This is safe, but it will invalidate any existing TPM-based protectors, so you must have your recovery key ready.
- Open the TPM Management console: press Win+R, type
tpm.msc, and press Enter. - In the right pane, click “Clear TPM…” and confirm. This restarts your PC and resets the chip.
- After reboot, Windows may ask for your recovery key. Enter it.
- Now re-encrypt or re-arm BitLocker. Open an elevated Command Prompt and run
manage-bde -protectors -add C: -tpmto re-add the TPM protector.
If you cannot boot into Windows at all, you can clear the TPM from the UEFI/BIOS menu. The exact menu is motherboard-specific, but it is usually under “Security” or “Trusted Computing”. This does not delete your data; it only clears the cryptographic keys on the TPM.
Fix 3: Disable and Re-enable BitLocker
If suspending and resetting the TPM do not work, the encryption metadata may be corrupted. Disabling BitLocker fully decrypts the drive (this can take a while), then you re-enable it from scratch.
- Open Control Panel > System and Security > BitLocker Drive Encryption.
- Click “Turn off BitLocker” next to your system drive. Wait for decryption to finish.
- Restart your PC. This should boot normally without BitLocker.
- Go back to BitLocker Drive Encryption and click “Turn on BitLocker”. Choose your unlock method (usually TPM) and finish the wizard.
This is the most thorough fix and resolves most metadata issues. It is also the slowest, especially on large drives.
Fix 4: Use the Repair Tool
Windows 10 includes a startup repair that can fix boot configuration problems. To use it, you need a Windows 10 installation USB or DVD.
- Boot from the installation media.
- Choose your language, then click “Repair your computer” in the lower-left corner.
- Go to Troubleshoot > Advanced Options > Startup Repair.
- Let it run. It will attempt to fix boot files and configuration.
If Startup Repair does not help, you can also use the Command Prompt from the same menu to run bootrec /fixmbr, bootrec /fixboot, and bootrec /rebuildbcd. These commands rebuild the boot configuration data that BitLocker checks.
When to Decrypt Completely
If the error keeps coming back after every fix, consider turning off BitLocker entirely. This is the right choice if you never use the extra security or if you are about to upgrade hardware (like replacing the motherboard or SSD).
To decrypt permanently: open BitLocker Drive Encryption in Control Panel, click “Turn off BitLocker”, and wait. Once decrypted, the drive is no longer protected, so anyone with physical access can read your files. Only do this if you understand the risk.
Also note: BitLocker is only available on Windows 10 Pro, Enterprise, and Education editions. Home edition users see this error only if the drive was encrypted on another edition or if they used device encryption (which is different but similar).
Frequently Asked Questions
Will I lose my data if I reset the TPM?
No. Resetting the TPM only clears the cryptographic keys stored on the chip. Your data remains encrypted on the drive. You will need your recovery key to unlock the drive after the reset, but no files are deleted.
What if I forgot my BitLocker recovery key?
Without the recovery key, you cannot unlock the drive. Check your Microsoft account at account.microsoft.com/devices/recoverykey, or ask your IT department if this is a work device. If you have no key and no backup, the data is effectively unrecoverable.
Can I disable BitLocker without booting into Windows?
No, you must boot into Windows to disable BitLocker. If you cannot boot, you need to use the recovery key to get in first. If you have lost the key, you cannot disable BitLocker from outside Windows.
Does this error mean my drive is failing?
No. The error is about boot configuration, not disk health. If your drive were failing, you would likely see other symptoms like slow reads, bad sectors, or SMART warnings. This error is almost always a software/configuration issue.
Why did this happen after a Windows update?
Windows updates can change the boot loader or the boot configuration data. The TPM measures the boot process, and if the update changes a file that is part of the measured chain, the TPM hash changes, and BitLocker refuses to unlock. This is a known side effect and is by design.
Is it safe to use the recovery key every time I boot?
It is safe but inconvenient. If you have to enter the key every boot, it means the TPM is not matching the current boot configuration. You should fix the configuration or re-arm BitLocker so that normal boot works again.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Set a Google Play Budget & Stop Accidental Purchases
- Destiny 2 Error Code Anteater: Fixes & Causes
- View Android Photos on Chromebook: Step-by-Step
- Fix Windows Could Not Prepare the Computer to Boot
- Windows 11 Security Settings: Best Config Guide
- Block Ads Network Wide at the Router Level