sodcalculator

10 Tech How-To

Fix Trust This Computer iPhone: Full Guide

Guide 10-54018 · Updated · Step by step

When your iPhone shows the “Trust This Computer?” alert, it means the iOS device is asking for your permission to establish a secure connection with a Mac or PC. The fix is straightforward: tap “Trust” on the iPhone and enter your passcode, but if the prompt keeps reappearing or the connection fails, you need to reset the trust settings, update drivers, or change your USB cable. This guide covers every step to resolve the issue on current versions of iOS, iPadOS, macOS, and Windows.

Why the Alert Appears

Apple introduced the trust prompt in iOS 7 as a security measure. When you connect an iPhone to a computer via USB, the phone verifies that the computer is one you have previously authorized. The alert is triggered by the lockdown folder on the iPhone, which stores a cryptographic key for each trusted computer. If the folder is missing, corrupted, or the computer’s key is not present, iOS asks for permission again.

This is not a bug; it is a deliberate feature to prevent unauthorized access to your photos, contacts, and other data. The prompt appears only when the phone is unlocked and the computer is recognized as a new or untrusted device. If you never see the prompt, but the phone also does not connect, the issue is usually with the cable or the computer’s USB driver.

How to Trust a Computer (The Basic Fix)

  1. Connect your iPhone to the computer using a cable that supports data transfer (not just charging).
  2. Unlock your iPhone with Face ID, Touch ID, or your passcode.
  3. On the iPhone screen, tap Trust in the alert that appears.
  4. Enter your passcode when prompted.
  5. On a Mac, open Finder (macOS Catalina or later) or iTunes (older macOS). On Windows, open iTunes or the File Explorer (if you have the “Apple Devices” app).
  6. Your iPhone should appear in the sidebar or device list. If it does, the trust was successful.

If you tapped “Don’t Trust” by mistake, disconnect the phone, reconnect it, and tap “Trust” again. The alert will reappear because the phone has not stored the computer’s key.

Reset Trust Settings on iPhone

If the prompt keeps appearing every time you connect, even after tapping Trust, the trust database is likely corrupted. Resetting it forces iOS to treat all computers as new, so you will need to re-authorize them.

  1. Open Settings on your iPhone.
  2. Go to General > Transfer or Reset iPhone.
  3. Tap Reset and choose Reset Location & Privacy. (This also resets location permissions, so you will need to re-grant them to apps.)
  4. Enter your passcode and confirm.
  5. Reconnect the iPhone to the computer, and the trust prompt should appear. Tap Trust and enter your passcode.

Note: In older iOS versions (iOS 14 and earlier), the path was Settings > General > Reset > Reset Location & Privacy. The current path is the same, but the wording may vary slightly. This action does not delete any personal data.

Fix on Mac (macOS Catalina or Later)

On modern Macs, Finder handles iPhone connections. If the trust prompt does not appear or the phone is not recognized:

  • Make sure your Mac is updated to the latest macOS version.
  • Use a different USB port (preferably directly on the Mac, not a hub).
  • Restart both the Mac and the iPhone.
  • Open Finder and check the sidebar under Locations. If the iPhone appears, click it and then click Trust on the iPhone screen.
  • If you see “iPhone is not available” or a “Trust” error, go to Keychain Access (in Utilities) and search for “iPhone” or “lockdown”. Delete any entries related to the iPhone, then reconnect.

On older macOS (Mojave or earlier), use iTunes instead of Finder. The steps are the same.

Fix on Windows (iTunes or Apple Devices App)

Windows users often face driver issues. The trust prompt is the same, but the computer side may not recognize the phone at all.

  1. Install the latest version of iTunes from Apple’s website (or the Microsoft Store version).
  2. Connect the iPhone and unlock it. Tap Trust if prompted.
  3. If Windows says “Device not recognized”, open Device Manager (right-click Start > Device Manager).
  4. Look under Universal Serial Bus devices or Portable Devices for “Apple iPhone” or “Apple Mobile Device USB Driver”.
  5. If there is a yellow exclamation mark, right-click the entry and select Update Driver > Search automatically.
  6. If that fails, uninstall the driver (right-click > Uninstall device), then disconnect the iPhone, restart the PC, and reconnect. Windows will reinstall the driver.
  7. If you have the new Apple Devices app (for Windows 11), use that instead of iTunes for syncing and backup.

Do not use a USB hub or a front-panel port; use a rear port on the motherboard for a stable connection.

Common Problems and Misconceptions

“The prompt appears but my passcode is not accepted.” This usually happens if you have a wrong passcode or if the phone is in a restricted mode (e.g., Screen Time). Turn off Screen Time temporarily to test.

“I trusted the computer, but iTunes still says ‘iPhone is not recognized’.” This is often a cable issue. Many third-party cables are charge-only and do not carry data. Try the original Apple cable or a certified MFi cable.

“Do I need to trust a computer to charge?” No. Charging works without trust. Trust is only required for data access (photos, file transfer, backup, sync).

“Will trusting a computer give it full access to my phone?” Yes, it grants the computer access to your photos, videos, contacts, and other data that the computer can read via the operating system’s sync features. Only trust computers you own or fully control.

“Does resetting trust settings delete my data?” No, it only clears the list of trusted computers and resets location and privacy permissions. Your photos, apps, and settings remain intact.

When to Try a Different Cable or Port

If you have followed all the steps and the trust prompt still does not appear, or the computer does not see the phone, the problem is almost certainly hardware. Test with:

  • A different USB cable (preferably Apple’s or a certified MFi cable).
  • A different USB port on the computer.
  • A different computer (to isolate the issue).

Also, make sure the iPhone’s Lightning or USB-C port is clean. Use a soft, dry brush to remove lint. Do not use metal objects or liquids.

If the phone charges but does not show the trust prompt, the cable is likely data-capable but the port is dirty. If the phone does not charge either, the cable or port is faulty.

Frequently Asked Questions

Why does my iPhone keep asking to trust this computer?

The trust database on the iPhone may be corrupted, or the computer’s key was not saved. Resetting Location & Privacy (as described above) usually fixes it. Also, ensure you are using a data-capable cable and that the iPhone is unlocked before connecting.

Is it safe to tap “Trust” on a public computer?

No. Tapping Trust gives that computer access to your iPhone’s data. Only trust computers you own or trust. If you accidentally tap Trust on a public computer, immediately go to Settings > General > Reset > Reset Location & Privacy to revoke access.

How do I remove a computer from the trusted list?

You cannot remove individual computers. You must reset the entire trust list by going to Settings > General > Transfer or Reset iPhone > Reset > Reset Location & Privacy. This clears all trusted computers.

What if the trust prompt doesn’t appear at all?

If the prompt does not appear, the computer may already be trusted (from a previous connection) or the cable is not data-capable. If the computer still does not see the phone, try a different cable/port, restart both devices, and update the computer’s USB drivers (Windows) or macOS.

Does trusting a computer work the same on iPad?

Yes, iPadOS behaves identically. The same steps apply for iPad.

Can I trust a computer without a passcode?

No. The passcode is required to confirm that you are the owner. If you have forgotten your passcode, you must reset the phone, which erases data.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →