sodcalculator

10 Tech How-To

Fix Windows 10 Setup Stuck Checking Updates

Guide 10-48748 · Updated · Step by step

If your Windows 10 installation is stuck on the “Checking for updates” screen, the fix usually involves disconnecting from the internet, waiting a few minutes, or bypassing the update check entirely with a registry tweak or command-line switch. The exact solution depends on whether you’re doing a clean install, an in-place upgrade, or a feature update, and we’ll cover all three scenarios below.

Why Windows 10 Setup Gets Stuck on Updates

During installation, Windows 10 tries to download the latest cumulative updates, drivers, and security patches before it lets you proceed. This is intentional—Microsoft wants your new system to be as up-to-date as possible. However, the process can hang for several reasons:

  • Slow or unstable internet connection, causing the update download to time out silently.
  • Microsoft’s update servers are overloaded, especially on major release days.
  • Corrupted update cache files from a previous interrupted installation.
  • Incompatible or outdated network drivers that fail during the update check.
  • Windows Update service (wuauserv) is disabled or stuck in a bad state.

The screen often shows a spinning circle with “Checking for updates” and can stay there for hours. In most cases, the installation isn’t frozen—it’s just waiting on a network request that never completes.

How to Fix a Clean Install Stuck on Updates

If you’re installing Windows 10 from a USB drive or DVD and it’s stuck on the update check, the quickest fix is to disconnect from the internet. Here’s how:

  1. Unplug the Ethernet cable or turn off Wi-Fi (if using a laptop, disable the wireless adapter via a physical switch or function key).
  2. Wait 30–60 seconds. The setup should detect the lack of connection and skip the update check.
  3. If it doesn’t skip automatically, click the “Back” arrow, then select “Install now” again. With no network, it will usually proceed.

If you want to keep the internet connected but skip the check, you can use a registry hack. At the setup screen, press Shift+F10 to open a command prompt, then type:

reg add HKLM\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Setup\\OOBE /v BypassARSO /t REG_DWORD /d 1 /f

This tells setup to skip the “Get updates” step. Close the command prompt and continue the installation. Note that this only works for the out-of-box experience (OOBE) phase, not the initial file copy.

Fixing an In-Place Upgrade or Feature Update Stuck on Updates

When upgrading an existing Windows 10 installation (e.g., from 1909 to 22H2), the setup also checks for updates. If it hangs, try these steps in order:

  1. Restart the setup process. Sometimes a temporary glitch clears on a second attempt.
  2. Run Windows Update Troubleshooter. Go to Settings > Update & Security > Troubleshoot > Additional troubleshooters > Windows Update, then run it.
  3. Clear the SoftwareDistribution folder. Open an elevated Command Prompt (right-click Start > Command Prompt (Admin)) and run:
    net stop wuauserv
    net stop bits
    ren C:\\Windows\\SoftwareDistribution SoftwareDistribution.old
    net start wuauserv
    net start bits
  4. Disable the update check temporarily. In the same command prompt, run:
    reg add HKLM\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\WindowsUpdate /v DoNotConnectToWindowsUpdateInternetLocations /t REG_DWORD /d 1 /f
    Then run setup again. After the upgrade, set the value back to 0.

If none of that works, you can bypass the check entirely by running setup with the /NoWeb switch. Open a command prompt in the folder containing setup.exe and type:

setup.exe /NoWeb

This tells Windows Setup to skip the online update check and proceed with the local files.

What to Do If the Screen Is Truly Frozen

If the progress circle stops spinning entirely and the mouse cursor moves but nothing changes for over 30 minutes, the setup may be genuinely hung. In that case:

  • Press Ctrl+Shift+Esc to open Task Manager and check if setup.exe or wuauclt.exe is using CPU. If it’s at 0% and not responding, the process is stuck.
  • Force a restart by holding the power button for 10 seconds. This is safe during the early phase (before the first reboot), but if you’re past the “Getting files ready” stage, you risk a partially installed system.
  • If you’re past the first reboot and it hangs, boot from your installation media and choose “Repair your computer” > Troubleshoot > Advanced options > Startup Repair.

In rare cases, the hang is caused by a faulty RAM stick or a failing hard drive. If you’ve tried everything and it still freezes, run a memory diagnostic (Windows Memory Diagnostic tool) and check the disk with chkdsk /f from the command prompt.

How Long Should You Wait Before Intervening?

There’s no official time limit, but a general rule is: if it’s been over 2 hours on the “Checking for updates” screen, something is wrong. On a typical broadband connection, the check should complete in 5–15 minutes. If you’re on a very slow connection (under 1 Mbps), it could take longer, but not indefinitely.

If you have a metered connection or a proxy, setup might hang because it can’t reach Microsoft’s servers. In that case, the /NoWeb switch is your best bet.

Preventing the Issue on Future Installations

To avoid this problem entirely, you can create a Windows 10 installation media that includes the latest updates. Microsoft releases updated ISO files periodically, so downloading the current version from the official site (using the Media Creation Tool) usually includes all updates up to that month. This reduces the need for setup to download anything.

Alternatively, you can slipstream updates into your USB drive using tools like NTLite, but that’s more advanced. For most users, using a recent ISO and disconnecting from the internet during setup is the simplest workaround.

Frequently Asked Questions

Is it safe to skip the update check during Windows 10 installation?

Yes, it’s safe. Skipping the check means you’ll miss the latest cumulative updates and drivers, but you can install them later via Windows Update once the system is up and running. Microsoft designed the bypass for enterprise deployments and it doesn’t affect the core installation.

Why does Windows 10 setup always check for updates?

Microsoft wants to ensure that the installation includes the latest security patches and driver fixes, reducing the risk of vulnerabilities and hardware issues. It’s a deliberate design choice, not a bug, but it can be problematic on slow or restricted networks.

Can I use the /NoWeb switch on a clean install from USB?

No, the /NoWeb switch works only with setup.exe in an existing Windows environment. For a clean install from bootable media, you need to disconnect from the internet or use the registry bypass mentioned earlier.

What if I’m stuck on “Checking for updates” after the first reboot?

If you’re past the initial file copy and the system reboots, the update check happens during the “Getting devices ready” phase. Disconnecting the internet at this point won’t help because the system is already configured. Try waiting, or if it’s stuck for hours, restart and boot from your installation media to run Startup Repair.

Does turning off Windows Update service before setup help?

No, stopping the Windows Update service before running setup can cause the setup to fail because it depends on that service. Instead, use the registry key to disable the online check or the /NoWeb switch.

Will I lose my files if I skip updates during an in-place upgrade?

No, skipping the update check doesn’t affect your files. It only skips the download of additional updates. Your personal files and installed programs remain untouched during an in-place upgrade.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →