If you see “Windows could not find a driver for your network adapter” during or after a Windows 10 installation, the fix is to install the correct network adapter driver from the manufacturer’s website or your PC’s support page, then restart. This error typically appears when Windows lacks the built-in driver for your Wi-Fi or Ethernet chip, often because the hardware is newer than the Windows installation media or because the driver file is corrupted.
Why Windows Can’t Find the Driver
Windows 10 includes a large library of generic drivers, but it cannot cover every network adapter ever made. The error usually occurs in these situations:
- New hardware: A laptop or motherboard released after your Windows 10 installation media (USB or DVD) may have a chipset that the older Windows build doesn’t recognize.
- Clean install: When you wipe the hard drive and install Windows fresh, all manufacturer-provided drivers are deleted, including the network driver.
- Corrupted driver: A failed Windows update or a power outage during driver installation can leave the driver in a broken state.
- Disabled or hidden device: The adapter may be physically present but disabled in Device Manager, or Windows may be showing a ghost device that needs removal.
The error message itself appears during the “Let’s connect you to a network” step of Windows setup, but it can also show up later in Device Manager with a yellow warning icon.
How to Fix It: Step-by-Step
Try these fixes in order. The first one works in most cases.
- Use another device to download the driver. If you have a phone, tablet, or another computer, go to your PC manufacturer’s support website (Dell, HP, Lenovo, Asus, etc.) or the network adapter chip maker’s site (Intel, Realtek, Broadcom, Qualcomm). Search for your exact model and download the Wi-Fi and/or Ethernet driver for Windows 10. Save it to a USB flash drive.
- Copy the driver to the PC with the error. Plug the USB drive into the affected computer. In the Windows setup screen, click “Load driver” and browse to the folder where you saved the driver. Windows will install it and continue.
- If you’re already in Windows, use Device Manager. Press Win + X and select Device Manager. Expand “Network adapters.” Right-click the adapter with a yellow exclamation mark, choose “Update driver,” then “Browse my computer for drivers.” Point to the folder on your USB drive.
- Run the network troubleshooter. Go to Settings > System > Troubleshoot > Other troubleshooters > Network Adapter. This can sometimes reset the adapter and reinstall the driver automatically.
- Check if the adapter is disabled in BIOS. Restart the PC and press the key to enter BIOS/UEFI (usually Del, F2, or F10). Look under “Onboard Devices” or “Advanced” and make sure the wireless or LAN controller is set to Enabled. Save and exit.
- Use Windows Update to find the driver. If you have an Ethernet cable available, plug it in temporarily. Windows Update often fetches the missing driver automatically. Go to Settings > Update & Security > Windows Update > Check for updates.
What to Do If You Can’t Download the Driver
If you have no internet access on the affected PC and no second device, you still have options:
- Use Windows Setup’s built-in driver search. Sometimes the driver is already on the installation media but not loaded. In the setup screen, click “Load driver” and then “Browse” – navigate to the root of your Windows USB/DVD and see if Windows finds anything.
- Try a different Windows 10 version. If you’re installing an older build (e.g., 1903), download the latest Windows 10 Media Creation Tool from Microsoft on another PC and create a fresh USB. Newer builds include more drivers.
- Use your phone as a USB tether. Connect your phone via USB and enable USB tethering in the phone’s settings. Windows may recognize it as a network adapter and give you internet access, after which you can download the driver.
- Borrow a USB Wi-Fi adapter. A cheap USB Wi-Fi dongle often uses a generic driver that Windows already has. Plug it in, let Windows install it, then download the correct driver for your internal adapter.
Common Mistakes and Misconceptions
One frequent mistake is downloading the wrong driver version – 32-bit vs 64-bit Windows. Always match the architecture. Another is downloading a driver for a similar but not identical model; network chips vary even within the same laptop series.
A common misconception is that the error means your network adapter is broken. In nearly all cases, the hardware is fine; it’s just missing the software. Also, some users think that running “sfc /scannow” or “DISM” fixes this – those tools repair Windows system files, but they don’t install missing third-party drivers. They won’t help here.
How to Prevent This in the Future
Before you reinstall Windows, always download the network drivers from your PC manufacturer’s support page and save them to a USB drive. Keep that USB drive labeled and stored with your other recovery media. After a clean install, install the chipset driver first, then the network driver, then the graphics driver – that order avoids many conflicts.
Also, consider creating a system restore point after a successful driver installation. If a future update breaks the driver, you can roll back.
When the Fix Doesn’t Work: Hardware Issues
If you’ve tried all the above and the adapter still isn’t recognized, the problem may be physical:
- Loose connection: On a desktop, open the case and reseat the Wi-Fi card or the Ethernet card. On a laptop, this is rarely possible, but an external USB adapter is a good test.
- Dead adapter: If the adapter never appears in Device Manager even after driver installation, it may have failed. Test with a USB Wi-Fi dongle – if that works, the internal adapter is likely dead.
- BIOS update: A motherboard BIOS update sometimes fixes compatibility issues with newer network chips. Check the manufacturer’s site for a BIOS update, but only do this if you’re comfortable – a failed BIOS update can brick the PC.
If you suspect hardware failure, and the PC is under warranty, contact the manufacturer. Otherwise, a USB Wi-Fi adapter is the cheapest permanent solution.
Frequently Asked Questions
Can I install Windows 10 without a network driver?
Yes, you can complete the installation by clicking “I don’t have internet” during setup. Windows will create a local account, and you can install the driver later. You just won’t have internet until the driver is installed.
Why does Windows say “no network adapter” when I have one?
This usually means Windows doesn’t have a driver for your specific adapter chip. It’s not saying the hardware is absent – it’s saying it can’t communicate with it without the correct software.
Is it safe to use a driver from a third-party website?
It’s safer to use the manufacturer’s official site or Microsoft’s Update Catalog. Third-party driver download sites often bundle adware or outdated versions. If you must use one, scan the file with Windows Defender before running it.
How do I find out what network adapter I have if I can’t boot into Windows?
During Windows setup, press Shift+F10 to open a command prompt. Type wmic nic get name,manufacturer and press Enter. That lists the network controllers. You can also check your PC’s spec sheet online if you know the model.
Will a Windows 10 update fix the missing driver automatically?
Sometimes, yes. If you can get any internet connection (even via Ethernet or USB tethering), Windows Update often finds and installs the correct driver. But if the driver is not on Microsoft’s servers, you’ll still need to get it from the manufacturer.
Can I copy the driver from another computer with the same adapter?
Yes. On the working computer, open Device Manager, right-click the adapter, choose “Export driver” (or use the “Driver Details” and copy the .inf and .sys files). Save those to a USB drive and point Windows to that folder on the broken PC. This works if the Windows versions are the same architecture.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Show User Library in macOS High Sierra & Sierra
- Device Manager Shortcut: Windows 10 Desktop
- How to Remove Forgotten Passcode from iPhone
- Fix Slow Wi-Fi Problem iPhone X: 9 Steps
- How to Check if a Candidate Accepts Crypto Donations
- How to Listen to Deleted Voicemails on iPhone