sodcalculator

10 Tech How-To

Fixed Bad System Config Info Windows 10 Error

Guide 10-44821 · Updated · Step by step

The “Bad System Config Info” error in Windows 10 is a blue screen of death (BSOD) that usually appears during startup, caused by corrupted registry hives, faulty drivers, or recent system changes. You can often fix it by running automatic startup repair, using System Restore, or rebuilding the BCD (Boot Configuration Data) from the recovery environment. This guide walks through the most effective fixes in order, from least to most invasive, so you can get back to your desktop without losing data.

What Causes Bad System Config Info?

This specific bug check (code 0x00000074) points to a problem with the SYSTEM registry hive, which Windows loads very early in the boot process. Common triggers include:

  • Corrupted or missing registry files after a forced shutdown or power outage.
  • A recently installed driver or Windows update that conflicts with existing system files.
  • Disk errors on the system partition, often from bad sectors or improper shutdowns.
  • Malware that modifies registry keys or boot configuration.
  • Third-party software that changes boot settings, like disk encryption tools or system cleaners.

Because the error appears before Windows fully loads, you usually can’t access the desktop normally. You’ll need to boot into the Windows Recovery Environment (WinRE) to run the fixes below.

Before You Start: Accessing the Recovery Environment

If Windows fails to boot twice in a row, it should automatically enter WinRE. If not, you can force it by turning your PC off and on three times, interrupting the boot process each time. Once in WinRE, choose Troubleshoot → Advanced options to see the repair tools. If you have a Windows 10 installation USB drive, you can boot from it and select “Repair your computer” instead. Have your BitLocker recovery key ready if you use device encryption.

Fix 1: Run Startup Repair

Startup Repair is the simplest fix and often resolves the issue automatically. It scans for common problems like missing boot files or corrupted registry hives and attempts to repair them.

  1. In the Advanced options menu, select Startup Repair.
  2. Choose your operating system (usually Windows 10) and wait for the process to finish.
  3. If it reports that it couldn’t fix the problem, try the next fix.

Startup Repair may take 10-20 minutes. It doesn’t touch your personal files, so it’s safe to run first. If it fails, move on to System Restore.

Fix 2: Use System Restore

System Restore rolls back system files, registry settings, and drivers to a previous restore point, which can undo whatever change caused the error. Your personal documents and photos are not affected.

  1. In Advanced options, select System Restore.
  2. Click Next and choose a restore point from before the error started appearing.
  3. Confirm your choice and wait for the restore to complete.

If you don’t see any restore points, it means system protection was turned off. In that case, skip to Fix 3. Restore points are only created automatically before major updates or driver installs, so you might not have one if the error appeared suddenly.

Fix 3: Rebuild the Boot Configuration Data (BCD)

The BCD stores boot options for Windows. If it’s corrupted, the system can’t load properly. Rebuilding it from the command prompt often resolves the Bad System Config Info error.

  1. In Advanced options, select Command Prompt.
  2. Type the following commands, pressing Enter after each one:
bootrec /fixmbr
bootrec /fixboot
bootrec /scanos
bootrec /rebuildbcd

If you get an “Access is denied” error when running bootrec /fixboot, you may need to run it again after taking ownership of the BCD store. A more thorough approach is to delete and recreate the BCD store manually:

  1. Type c: (or the drive letter where Windows is installed, often D: from WinRE) and press Enter.
  2. Run cd \Windows\System32 to navigate to the System32 folder.
  3. Type bcdedit /export C:\BCD_Backup to back up your current BCD.
  4. Type ren BCD BCD.old to rename the existing BCD file.
  5. Type bootrec /rebuildbcd and follow the prompts to add the Windows installation to the new BCD.

After rebuilding, restart your PC. If the error persists, you may need to check for disk corruption.

Fix 4: Check for Disk Errors with CHKDSK

Bad sectors or file system corruption on the system drive can cause this BSOD. CHKDSK scans for and repairs these issues.

  1. Open Command Prompt from Advanced options as above.
  2. Type chkdsk /f /r C: (replace C: with your Windows drive letter) and press Enter.
  3. If prompted to dismount the volume, type Y and press Enter.
  4. Wait for the scan to complete. It can take an hour or more on large drives.

The /f flag fixes errors, and /r locates bad sectors and recovers readable data. If chkdsk finds issues, it will attempt to repair them. After it finishes, restart and see if the error is gone.

Fix 5: Disable Driver Signature Enforcement (Temporary)

If the error started after installing a driver with an invalid signature, you can boot with driver signature enforcement disabled to get into Windows and uninstall the problematic driver.

  1. From the Advanced options, select Startup Settings and click Restart.
  2. After your PC restarts, press 7 or F7 to select “Disable driver signature enforcement”.
  3. Windows will boot normally. Then open Device Manager, find the recently installed driver, right-click it, and choose Uninstall device.
  4. Restart normally. If the error doesn’t return, the driver was the culprit.

This is a temporary measure; the setting resets on the next reboot. It’s useful for diagnosing driver problems but not a permanent fix.

Fix 6: Reset This PC (Last Resort)

If none of the above work, you can reset Windows 10, which reinstalls the operating system while keeping your personal files (if you choose that option). This is the most invasive fix and should be used only after trying everything else.

  1. In Advanced options, select Reset this PC.
  2. Choose Keep my files to preserve your documents and photos, or Remove everything for a clean slate.
  3. Follow the prompts. You may need to reinstall some apps afterward.

Before resetting, try to back up your important data from the command prompt if you can (e.g., copy files to an external drive). A reset will reinstall Windows but may not fix hardware issues, so if the error persists even after a reset, the problem might be failing hardware (like RAM or the hard drive).

Frequently Asked Questions

Will I lose my files if I run Startup Repair?

No. Startup Repair only fixes system files and boot records. It does not touch your personal files, photos, or documents. However, it’s always a good idea to back up important data regularly, as any system repair carries a small risk.

Can I fix Bad System Config Info without a Windows installation USB?

Yes, if Windows can enter the Recovery Environment automatically after failed boots. If not, you can force it by interrupting startup three times. If that doesn’t work, you’ll need a USB drive with Windows 10 installation media to access the repair tools.

What does the error code 0x00000074 mean?

It indicates that the SYSTEM registry hive is corrupted or unreadable. This hive contains critical configuration data for drivers and services, so Windows cannot continue booting. The fixes above address the most common causes.

How long does CHKDSK take?

It depends on the size and health of your drive. A typical 500GB drive can take 30 minutes to an hour. Larger or failing drives can take several hours. Let it run overnight if needed.

Is there a way to prevent this error in the future?

Regularly update Windows and drivers, shut down properly, and avoid force powering off. Also, create restore points before making major system changes. Running chkdsk periodically can catch disk errors early.

Should I try updating BIOS to fix this?

Rarely. BIOS updates can help with hardware compatibility but are unlikely to fix a registry corruption issue. Only consider this if you’ve exhausted all other fixes and suspect a hardware conflict.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →