sodcalculator

10 Tech How-To

Fix Unmountable Boot Volume Error in Windows

Guide 10-51418 · Updated · Step by step

The “Unmountable Boot Volume” error (0x000000ED) is a Windows stop code that appears when the system cannot read the boot volume, usually due to disk corruption, faulty cables, or driver issues. This guide explains the most common causes and provides step-by-step fixes, from simple restarts to using the Windows Recovery Environment.

What Causes the Unmountable Boot Volume Error?

This blue screen error occurs during Windows startup when the boot loader cannot access the system drive. The most frequent causes include:

  • File system corruption – damaged NTFS structures or bad sectors on the hard drive.
  • Loose or faulty cables – SATA or power cables that have come loose or are failing.
  • Driver issues – especially after a Windows update or a new driver installation.
  • BIOS/UEFI settings – incorrect SATA mode (e.g., switching between IDE and AHCI) can trigger this error.
  • Overheating or power surges – can cause temporary disk access failures.

It’s important to note that this error is different from a “Boot Device Not Found” message—the latter usually means the drive isn’t detected at all, while the unmountable boot volume error means Windows sees the drive but can’t read it properly.

Before You Start: Safety and Preparation

Attempting repairs on a drive that contains important data carries a small risk of data loss. Before running any repair commands, consider:

  • If you have a recent backup, you can proceed with confidence.
  • If not, you may want to try to recover your data first using a live Linux USB or a data recovery tool, but that is beyond the scope of this article.
  • Ensure your PC is plugged into a reliable power source (for laptops, keep the charger connected).

How to Access the Windows Recovery Environment

Most fixes require booting into the Windows Recovery Environment (WinRE). Here’s how to get there:

  1. Restart your PC. When the Windows logo appears, press and hold the power button to force a shutdown. Repeat this 2–3 times until you see “Preparing Automatic Repair”.
  2. After Windows fails to boot, you’ll see the blue recovery screen. Click Advanced options.
  3. Then go to Troubleshoot → Advanced options. You’ll see tools like Startup Repair, Command Prompt, and System Restore.

If your PC doesn’t enter WinRE automatically, you can use a Windows installation USB drive. Boot from the USB, choose your language, then click “Repair your computer” in the bottom-left corner.

Fix 1: Run Startup Repair

Startup Repair is the simplest fix and often resolves the error if the problem is minor corruption.

  1. In WinRE, go to Troubleshoot → Advanced options → Startup Repair.
  2. Select your operating system and let it run. It may take several minutes.
  3. If it succeeds, restart your PC normally.

If Startup Repair fails, move on to the next steps.

Fix 2: Use Command Prompt to Check and Repair the Disk

The most effective fix is to run disk checking and repair commands from the Command Prompt. This will scan the file system and fix errors.

  1. In WinRE, go to Troubleshoot → Advanced options → Command Prompt.
  2. Type chkdsk /f /r and press Enter. (If you have multiple drives, you may need to specify the drive letter, e.g., chkdsk C: /f /r.)
  3. If it asks to dismount the volume, type Y and press Enter.
  4. Wait for the scan to complete. This can take a long time (hours on large drives).
  5. After it finishes, type exit and restart your PC.

If chkdsk finds and fixes errors, the problem is likely solved. If it cannot run or reports severe corruption, try the next fix.

Fix 3: Use Bootrec to Rebuild Boot Configuration Data

Sometimes the Boot Configuration Data (BCD) is corrupted. Rebuilding it can help.

  1. Open Command Prompt as above.
  2. Run these commands one by one, pressing Enter after each:
bootrec /fixmbr
bootrec /fixboot
bootrec /scanos
bootrec /rebuildbcd
  1. When asked to add an installation to the boot list, type Y and press Enter.
  2. Type exit and restart.

If you see an “Access is denied” error when running bootrec /fixboot, you may need to run the command again after using diskpart to select the correct volume—but that’s a slightly more advanced step. If this doesn’t work, continue.

Fix 4: Check Hardware Connections and BIOS Settings

If software fixes fail, the issue may be physical.

  • Check SATA and power cables – Open your PC case (if it’s a desktop) and ensure the cables connecting your hard drive are firmly attached. Try a different SATA port if possible.
  • Check the drive in BIOS – Restart and press the key to enter BIOS (usually Del, F2, or F12). Look for the storage configuration and ensure the drive is detected. If not, the drive may be failing.
  • Check SATA mode – If you recently changed the SATA mode from IDE to AHCI (or vice versa), revert it. Windows may not boot if the mode is changed after installation.

If you have a laptop, you may not be able to access the drive easily. In that case, consider taking it to a professional if hardware failure is suspected.

Fix 5: Disable Driver Signature Enforcement (Temporary)

This is a less common fix, but if the error appeared after installing a new driver (especially a storage controller driver), you can try booting with driver signature enforcement disabled.

  1. In WinRE, go to Troubleshoot → Advanced options → Startup Settings.
  2. Click Restart.
  3. When the list appears, press 7 or F7 to select “Disable driver signature enforcement”.
  4. Windows will try to boot normally. If it does, you can then uninstall the problematic driver from Device Manager.

Frequently Asked Questions

Will I lose my files if I run chkdsk?

Running chkdsk /f /r can fix file system errors without deleting your personal files. However, if it finds corrupted files that cannot be repaired, it may move them to a folder like found.000, and some data might be lost. It’s always wise to back up important data if possible before running it.

Can I fix this error without a Windows installation USB?

Yes, if you can access the Windows Recovery Environment (by forcing shutdowns as described above). If that doesn’t work, you’ll need a USB drive with Windows installation media to access the repair tools.

What does “Unmountable Boot Volume” mean exactly?

It means Windows cannot mount (read) the volume that contains the boot files. This is often due to a corrupted file system, but can also be caused by hardware issues like a failing drive or loose cables.

How long does chkdsk take to run?

It depends on the size and condition of your drive. A healthy 1TB drive might take 30 minutes to an hour, but a drive with many bad sectors can take several hours. Let it run uninterrupted.

Is this error a sign that my hard drive is dying?

Not necessarily. It can be caused by a simple file system error or a loose cable. However, if the error keeps coming back after repairs, it may indicate a failing drive. You should back up your data immediately and consider replacing the drive.

Can I use System Restore to fix this error?

Yes, if you have a restore point from before the error started. In WinRE, go to Troubleshoot → Advanced options → System Restore. Choose a restore point and follow the prompts. This won’t affect your personal files, but it may remove recently installed programs or drivers.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →