sodcalculator

10 Tech How-To

Haptics Not Working on iPhone or Apple Watch? Fix

Guide 10-47814 · Updated · Step by step

If haptics are not working on your iPhone or Apple Watch, the fix usually involves checking the vibration and haptic settings, ensuring Do Not Disturb or Silent Mode isn’t overriding them, and restarting the device. Below are the exact steps to restore the taps, ticks, and vibrations you expect.

Why Haptics Stop Working

Haptics are the small, precise vibrations produced by the Taptic Engine in iPhones and Apple Watches. They provide feedback for actions like typing, receiving notifications, and using the Digital Crown. When they stop, it’s usually due to one of three causes: a setting was toggled off, a system mode (like Silent Mode or Low Power Mode) is suppressing them, or a software glitch has temporarily disabled the Taptic Engine.

Understanding which type of haptic is missing matters. For example, keyboard clicks and system haptics are controlled separately from ringtone vibrations. On Apple Watch, haptic strength is adjustable, and the device can also be set to play a haptic only when the wrist is raised, which can be confusing if you’re expecting a tap while the watch is flat.

iPhone: Check the Core Haptic Settings

Start with the most common culprit: the system-wide haptics toggle. On iPhones running iOS 17 or later, go to Settings > Sounds & Haptics. Scroll to the bottom and ensure System Haptics is turned on. This controls the subtle taps you feel when you toggle switches or use the Control Center.

Next, check the vibration settings for calls and texts. In the same menu, tap Ringtone or Text Tone, then tap Vibration. Make sure it isn’t set to None. You can also select Create New Vibration to test if the Taptic Engine responds at all. If it doesn’t vibrate during the creation test, the issue is likely hardware or a deeper software problem.

Apple Watch: Adjust Haptic Strength and Prominence

On your Apple Watch, open Settings > Sounds & Haptics. Use the Haptic Strength slider to increase the intensity. Also, check the Prominent Haptic toggle. When enabled, the watch plays an extra pre-haptic tap before certain alerts, like the chime for a timer or the hourly chime. If this is off, you may still get a vibration, but it will be less noticeable.

If you rely on haptics for alarms, note that the watch’s alarm vibration is tied to the Haptic Strength setting. If you have it set too low, you might sleep through it. Also, ensure Cover to Mute isn’t accidentally being triggered; if you cover the watch face with your palm for three seconds, it mutes alerts and haptics until the next one.

Silent Mode, Do Not Disturb, and Focus Modes

Both iPhone and Apple Watch respect Focus modes, including Do Not Disturb and Sleep. When a Focus is active, haptics for notifications are suppressed. Check your Control Center (swipe down from the top-right on iPhone, or swipe up on the watch face) to see if a Focus is enabled. If it is, tap it to turn it off or adjust its settings to allow haptics from specific apps.

On iPhone, Silent Mode (the physical switch above the volume buttons) does not disable System Haptics by default, but it does silence ringtones and alerts. However, if you have Change with Silent Mode enabled in Settings > Sounds & Haptics, it will also turn off haptic feedback for calls and texts. If your iPhone is in Silent Mode and you’re not feeling vibrations, this is likely why.

Software Glitches and Restarting

A temporary software glitch is a common cause. Restart both devices. On iPhone without Face ID, press and hold the power button until the slider appears. On Face ID models, press and hold the side button and either volume button. For Apple Watch, press and hold the side button until the Power Off slider appears, then drag it. To restart, press and hold the side button again until the Apple logo appears.

If a restart doesn’t help, check for a pending software update. Go to Settings > General > Software Update on both devices. Apple frequently fixes haptic-related bugs in iOS and watchOS updates. Also, try toggling the System Haptics setting off, waiting a few seconds, and turning it back on. This can sometimes reinitialize the Taptic Engine driver.

Low Power Mode and Battery Health

Low Power Mode on iPhone (Settings > Battery) automatically disables some haptics to save battery. If your iPhone is in Low Power Mode, you won’t get the keyboard clicks or system haptics. Turn it off to restore full haptic functionality. On Apple Watch, there is no dedicated Low Power Mode, but the watch automatically reduces haptic strength when the battery is below a certain level.

Battery health can also affect haptics. If your iPhone’s battery is significantly degraded (below 80% capacity), the system may reduce haptic output to prevent unexpected shutdowns. Check Settings > Battery > Battery Health. If it says your battery is “Service,” consider replacing it, as this can restore full haptic performance.

Hardware Issues and What to Do

If you’ve tried all the above and haptics still don’t work, the Taptic Engine may be faulty. This can happen after a drop or water damage. On iPhone, you can run a diagnostic by going to Settings > Privacy & Security > Analytics & Improvements and looking for a log file that starts with “panic” or “ResetCounter.” If you see such files, it’s a strong indicator of a hardware issue. However, this is not a definitive test.

For Apple Watch, you can test the Taptic Engine by going to Settings > Sounds & Haptics and scrolling to the bottom to tap the Haptic Test button. If you don’t feel anything, the Taptic Engine is likely damaged. In either case, contact Apple Support or visit an Apple Store for a hardware diagnostic. Do not attempt to open the device yourself, as this can cause further damage and void any warranty.

Frequently Asked Questions

Why do my iPhone keyboard clicks not vibrate?

Keyboard haptics are separate from system haptics. On iOS 16 and later, go to Settings > Sounds & Haptics > Keyboard Feedback and turn on Haptic. This setting is off by default on some models. Also, ensure your keyboard is the default Apple keyboard; third-party keyboards may not support haptics.

My Apple Watch doesn’t tap me on the wrist anymore. What’s wrong?

First, check Settings > Sounds & Haptics and increase the Haptic Strength. Then, make sure you’re wearing the watch snugly against your skin, as the haptics are weaker if the watch is loose. Also, check that the watch isn’t in Theater Mode (two masks icon in Control Center) or Silent Mode, both of which mute haptics.

Will restoring my iPhone fix haptics?

Yes, a full restore can fix software-related haptic issues. Before restoring, back up your data. Then, in the Finder (or iTunes on older PCs), select your device and choose “Restore iPhone.” This reinstalls iOS and should clear any corrupted settings. If haptics still don’t work after a clean restore, it’s almost certainly a hardware problem.

Can a screen protector affect haptics?

No, a screen protector does not affect the Taptic Engine. Haptics are generated internally, so a screen protector won’t block them. However, a thick case might dampen the vibration, making it feel weaker. Try removing the case to see if the haptic intensity improves.

Why do my haptics work for calls but not for notifications?

This is usually a per-app notification setting. Go to Settings > Notifications, select the app, and ensure Sounds & Haptics is enabled. If it’s set to “None,” you won’t feel a vibration. Also, check that the app’s own settings (like in WhatsApp or Telegram) have vibrations enabled.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →