This guide shows you how to open and use the Control Center on an iPhone or iPad running iOS 10 to quickly control your smart home devices, such as lights, thermostats, and door locks. You’ll learn how to add the Home section, customize which controls appear, and troubleshoot common issues. No prior setup is required beyond having your devices paired with the Home app.
What You’ll Need
- An iPhone, iPad, or iPod touch running iOS 10 or later.
- At least one smart home device that is compatible with Apple’s HomeKit and already added to the Home app.
- Your device must be connected to the same Wi-Fi network as your smart home accessories (for most devices).
Step-by-Step
- Unlock your iPhone or iPad. Press the Home button or use Touch ID to unlock the device. You can also access Control Center from the lock screen, but some controls may be limited until you unlock.
- Open Control Center. Swipe up from the very bottom edge of the screen. On an iPhone with a Home button, swipe up from the bottom bezel. On an iPad, swipe up from the bottom edge of the screen. The Control Center panel will slide up.
- Locate the Home section. In iOS 10, the Control Center is divided into two pages. Swipe left on the Control Center panel to switch from the main page (with brightness, volume, and music controls) to the second page, which contains the Home controls. If you don’t see a Home section, you may need to enable it (see Step 4).
- Enable the Home section (if missing). If you don’t see a Home section after swiping left, go to Settings > Control Center > Customize Controls. Tap the green plus icon next to “Home” to add it to the Control Center. It will appear on the second page.
- View your smart home devices. On the Home page of Control Center, you’ll see a grid of your favorite HomeKit accessories and scenes. Tap any icon to toggle that device on or off (for lights, switches, or locks). Tapping a scene will activate the scene (e.g., “Good Night” will turn off lights and lock doors).
- Access more details. To see more options for a specific device, press and hold (or 3D Touch, if your device supports it) on the device icon. This will open a pop-up with additional controls, such as brightness sliders for lights or temperature controls for thermostats.
- Exit Control Center. Tap anywhere above the Control Center panel, or swipe down from the top of the panel, to dismiss it. Your changes are applied immediately.
Common Mistakes
- Swiping up too fast: If you swipe up and immediately swipe left, you might miss the Home page. Swipe up, wait a moment, then swipe left.
- Not adding Home to Control Center: In iOS 10, the Home section is not enabled by default on all devices. You must add it manually in Settings.
- Confusing the two Control Center pages: The first page shows music and system toggles; the second page (swipe left) contains the Home controls. Some users think the Home controls are missing when they are just on the next page.
- Expecting all devices to appear: Only devices that you have marked as “Favorites” in the Home app will show up in Control Center. If a device isn’t there, open the Home app, tap the device, and enable “Include in Favorites.”
- Forgetting to unlock: On the lock screen, some controls (like unlocking doors) may require you to unlock your iPhone first for security reasons.
Tips
- Customize your favorite devices: In the Home app, you can reorder your favorite devices and scenes. The order you set in the Home app will be reflected in Control Center.
- Use 3D Touch for quick actions: On iPhone 6s and later, pressing firmly on a device icon in Control Center gives you a quick action menu. For example, you can dim a light to 50% without opening the Home app.
- Create scenes for faster control: Scenes let you control multiple devices with one tap. For example, a “Movie Night” scene can dim the lights and lower the blinds. Set up scenes in the Home app, and they will appear in Control Center.
- Access Control Center from lock screen: You can enable “Access on Lock Screen” in Settings > Control Center. This allows you to control devices without unlocking, but be aware that some security-sensitive actions (like unlocking a door) may still require authentication.
- Use Siri for hands-free control: While not directly part of Control Center, you can say “Hey Siri, turn off the living room lights” for quick control without even opening Control Center.
Troubleshooting
Home section not appearing after enabling: If you’ve added Home in Settings but it still doesn’t show, try restarting your device. Go to Settings > General > Shut Down, then power back on. If that fails, toggle the Home switch off and on in Settings > Control Center > Customize Controls.
Devices not responding in Control Center: This usually means your iOS device cannot communicate with the accessory. Check that your iPhone is on the same Wi-Fi network as the hub (like an Apple TV or HomePod) or the accessory itself. Also, ensure the accessory is powered on and within range. Restarting your router can help if Wi-Fi is flaky.
Control Center shows “No Response”: This indicates that the HomeKit hub (if you have one) is offline or unreachable. Check that your Apple TV, HomePod, or iPad that acts as a hub is powered on and connected to the internet. You can also try toggling iCloud Keychain off and on in Settings > iCloud.
Can’t swipe left to the Home page: If swiping left does nothing, you may have disabled the Home section inadvertently. Go to Settings > Control Center > Customize Controls and make sure Home is listed under “Include.” If it’s under “More Controls,” tap the green plus to add it back.
Control Center won’t open at all: If swiping up doesn’t work, check if “Access Within Apps” is enabled in Settings > Control Center. If it’s off, you can only open Control Center from the home screen. Also, make sure your device’s screen is not dirty or that you are swiping from the very bottom edge.
Frequently Asked Questions
Can I use Control Center to control smart home devices without unlocking my iPhone?
Yes, if you enable “Access on Lock Screen” in Settings > Control Center, you can view and toggle devices. However, actions that affect security (like unlocking a door) will require you to unlock your iPhone with Touch ID, Face ID, or passcode.
Why don’t all my HomeKit devices show up in Control Center?
Only devices that you’ve marked as “Favorites” in the Home app appear in Control Center. Open the Home app, find the device, tap and hold its icon, select “Settings,” and toggle on “Include in Favorites.” You can also reorder favorites in the Home app.
How do I add a new device to Control Center?
First, add the device to the Home app (using the accessory’s setup code). Then, mark it as a favorite in the Home app. It will automatically appear in Control Center’s Home section.
Can I control devices from different rooms in Control Center?
Yes, Control Center shows all your favorite devices regardless of room. To control a device that isn’t a favorite, you’ll need to open the Home app and navigate to the specific room.
What if I don’t have a HomeKit hub? Can I still use Control Center?
Yes, you can control devices directly when your iPhone is on the same Wi-Fi network as the accessory. A hub (like an Apple TV) is only needed for remote access and automations.
Does Control Center work with non-Apple smart home devices?
Only devices that are HomeKit-compatible will appear in Control Center. If your device uses a different protocol (like Zigbee or Z-Wave) and requires a separate app, it won’t show up in Control Center unless it supports HomeKit through a bridge.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Fix Administrator Account Disabled Error in Windows 11
- How to Play Kodi on Smart TV from PC
- Hogwarts Legacy Microsoft Visual C Runtime Error Fix
- Set Up UPI Payments Through WhatsApp
- Pair Oppo Enco Earbuds with Android, iPhone & Windows
- Factory Reset on Samsung Galaxy: What It Erases