sodcalculator

10 Tech How-To

Boot into Advanced Startup Options in Windows 10

Guide 10-44226 · Updated · Step by step

Advanced Startup Options (also called the Windows Recovery Environment or WinRE) is a menu that lets you troubleshoot, reset, or repair Windows 10 when it won’t start normally. This guide shows you the easiest ways to get there — from a working desktop, from the login screen, or when Windows is completely stuck.

What You’ll Need

  • A Windows 10 PC or laptop that is plugged in (especially if it’s a laptop — a shutdown during recovery can cause problems).
  • At least a few minutes of time; the process is quick but the system may restart once or twice.
  • If you plan to use “Startup Repair” or “System Restore,” you may need your BitLocker recovery key (if you use BitLocker encryption).

Step-by-Step

Method 1: From a Working Desktop (Easiest)

  1. Click the Start button (Windows logo) in the bottom-left corner.
  2. Click the Power icon (circle with a vertical line).
  3. Press and hold the Shift key on your keyboard.
  4. While holding Shift, click Restart. Keep holding Shift until the blue “Choose an option” screen appears.
  5. Release the Shift key. You are now in Advanced Startup Options.

Method 2: From the Login Screen

  1. If you’re at the lock or login screen, click the Power icon in the bottom-right corner.
  2. Press and hold the Shift key.
  3. While holding Shift, click Restart.
  4. Wait for the blue menu to appear, then release Shift.

Method 3: Using Settings (Good for Planning Ahead)

  1. Open the Start menu and click the Settings gear icon (or press Windows + I).
  2. Click Update & Security.
  3. In the left sidebar, click Recovery.
  4. Under “Advanced startup,” click the Restart now button.
  5. Your PC will restart and boot directly into the Advanced Startup Options menu.

Method 4: When Windows Won’t Start at All

  1. Turn on your PC. If Windows fails to load, it should automatically show a blue “Recovery” screen after a couple of attempts.
  2. If it doesn’t, turn the PC off completely (hold the power button for 5–10 seconds).
  3. Turn it on again. As soon as the Windows logo appears, hold the power button again to force a shutdown.
  4. Repeat this three times. On the third restart, Windows should enter Automatic Repair mode.
  5. On the “Automatic Repair” screen, click Advanced options to reach the full Advanced Startup Options menu.

Common Mistakes

  • Letting go of Shift too early: If you release Shift before the blue screen appears, Windows may restart normally. Keep holding it until you see “Choose an option.”
  • Clicking “Shut down” instead of “Restart”: The Shift+Restart trick only works with Restart. Shut down won’t take you to the menu.
  • Using the power button to force shutdown too many times: This can occasionally cause disk errors. It’s only meant as a last resort when Windows won’t start.
  • Not saving your work: Restarting with Shift will close all open programs. Save your files first.

Tips

  • Use Startup Repair (under Troubleshoot > Advanced options) first if Windows won’t boot — it’s the least invasive fix.
  • If you’re planning to use System Restore, make sure you have a restore point created beforehand.
  • For Command Prompt access, you can open it from Troubleshoot > Advanced options > Command Prompt. This is useful for running commands like sfc /scannow or bootrec /fixmbr.
  • If you use BitLocker, have your recovery key ready — you’ll be asked for it when entering certain tools.
  • You can also create a recovery drive (in Control Panel) to boot from if Windows won’t start at all.

Troubleshooting

Shift+Restart doesn’t work: Make sure you’re holding the Shift key on the same keyboard you’re using to click Restart. If you’re using a wireless keyboard, try a wired one or the on-screen keyboard. Also, check that your Shift key isn’t stuck.

You see “Choose an option” but it’s blank or unresponsive: This can happen if system files are corrupted. Try using the Command Prompt option to run sfc /scannow or DISM /Online /Cleanup-Image /RestoreHealth (requires internet). If that fails, you may need a Windows installation USB to repair.

Automatic Repair loop: If Windows keeps restarting and returning to the blue screen, choose Advanced options > Troubleshoot > Advanced options > Startup Settings, then restart and press 4 or F4 to boot into Safe Mode. From Safe Mode, you can uninstall recent updates or drivers.

You can’t see the Advanced Startup menu at all: If your PC boots straight to a black screen or a manufacturer logo, try pressing F8 or Shift+F8 repeatedly during startup (though this often doesn’t work on modern PCs with fast boot). Your best bet is to use a Windows 10 installation USB — boot from it, select your language, then click “Repair your computer” in the bottom-left corner.

Frequently Asked Questions

Will I lose my files by entering Advanced Startup Options?

No. Simply entering the menu doesn’t delete anything. However, if you choose “Reset this PC” or “System Restore,” you may lose files depending on the option you pick. Always back up important data before using recovery tools.

What is the difference between “Reset this PC” and “Startup Repair”?

Startup Repair tries to fix problems that prevent Windows from loading (like missing system files). Reset this PC reinstalls Windows — you can choose to keep or remove your personal files. Reset is more thorough but takes longer.

Can I boot into Safe Mode from Advanced Startup Options?

Yes. Go to Troubleshoot > Advanced options > Startup Settings, then click Restart. After your PC restarts, you’ll see a list of options — press 4 or F4 for Safe Mode, 5 or F5 for Safe Mode with Networking.

Why does my PC go straight to the login screen instead of the menu?

This usually happens if you let go of Shift too early or if you clicked “Shut down” instead of “Restart.” Try again, holding Shift firmly until the blue screen appears.

How do I exit Advanced Startup Options?

Click “Continue” on the “Choose an option” screen to exit and boot into Windows normally. If you’re in a submenu, look for the back arrow or “Exit” button.

Is Advanced Startup Options the same as the BIOS/UEFI settings?

No. BIOS/UEFI is firmware that initializes hardware before Windows loads. Advanced Startup Options is a Windows recovery environment. You can access UEFI firmware settings from Advanced Startup Options (Troubleshoot > Advanced options > UEFI Firmware Settings), but they are separate.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →