sodcalculator

10 Tech How-To

How to Boot Lenovo from USB in UEFI BIOS

Guide 10-49138 · Updated · Step by step

This guide shows you how to boot a Lenovo laptop or desktop from a USB drive when the system uses UEFI firmware. You’ll learn how to enter the BIOS, adjust boot settings, and use the one-time boot menu for a quick USB boot. No special tools are needed—just your Lenovo computer and a bootable USB drive.

What You’ll Need

  • A Lenovo computer (laptop or desktop) with UEFI BIOS.
  • A bootable USB drive (with Windows installer, Linux live USB, or recovery tool).
  • If your USB isn’t bootable yet, create one using tools like Rufus or the Windows Media Creation Tool.

Step-by-Step

  1. Save any open work and shut down your Lenovo completely. Do not use Restart—a full shutdown ensures the BIOS loads fresh.
  2. Insert the bootable USB drive into a USB port on your Lenovo. For desktops, use a rear port if possible; for laptops, any port works.
  3. Power on the computer. Immediately start pressing the appropriate key to enter the BIOS. On most Lenovo laptops and desktops, this is F2 (or Fn+F2 on some models). If F2 doesn’t work, try F1 or Enter (which may show a startup menu).
  4. In the BIOS, go to the Boot tab. Use the arrow keys to navigate. The exact name may be “Boot” or “Startup”.
  5. Check the boot mode. Look for “Boot Mode” or “UEFI/Legacy Boot”. Ensure it is set to UEFI (or “UEFI Only”). If it’s set to Legacy, change it to UEFI. Note: changing this may affect existing OS booting, so if you only need a one-time USB boot, skip this step and use the boot menu instead.
  6. Set USB as the first boot option. In the Boot tab, find “Boot Priority” or “Boot Order”. Highlight your USB drive (it may appear as “USB HDD”, “USB Key”, or with the drive brand name) and move it to the top using F5/F6 or +/- keys.
  7. Save and exit. Press F10 to save changes and exit. Confirm with “Yes” when prompted. The computer will restart and attempt to boot from the USB.
  8. If you prefer a one-time boot (no permanent change): Instead of entering BIOS, press F12 (or Fn+F12) during startup. This opens the Boot Menu. Select your USB drive from the list and press Enter. This does not change your boot order permanently.

Common Mistakes

  • Pressing the wrong key. On some Lenovo models, F2 is not the BIOS key. Try F1, F12, or Enter if F2 doesn’t work.
  • USB not bootable. If the USB doesn’t appear in the boot menu or BIOS, it may not be properly created as bootable. Recreate it with a reliable tool.
  • Secure Boot interference. If Secure Boot is enabled, it may block booting from unofficial USB media. Temporarily disable Secure Boot in the Security tab of the BIOS.
  • Using the wrong USB port. Some ports (especially front panel on desktops) may not be recognized during boot. Try a different port, preferably USB 2.0 if available.
  • Forgetting to save changes. If you change boot order but exit without saving, the change won’t stick. Always press F10 and confirm.

Tips

  • Use the one-time boot menu (F12) for a single boot. It’s faster and avoids permanently changing your boot order.
  • Create your USB with UEFI compatibility. When using Rufus, select “GPT” as the partition scheme and “UEFI (non CSM)” as the target system.
  • Keep your BIOS updated. Lenovo releases BIOS updates that improve hardware compatibility. Check Lenovo’s support site for your model.
  • If you see “No bootable device found”, re-enter the BIOS and confirm the USB is listed. If not, try a different USB port or recreate the USB.
  • For Windows installation, you may need to disable Secure Boot temporarily. After installation, you can re-enable it.

Troubleshooting

USB doesn’t appear in boot menu or BIOS:

  • Recreate the USB using a tool like Rufus or the Windows Media Creation Tool. Ensure it’s formatted as FAT32 for UEFI boot.
  • Try a different USB port (preferably a USB 2.0 port if your system has one).
  • Check if the USB drive is recognized in the BIOS under “Information” or “Main”. If not, the USB itself may be faulty.

Computer boots to Windows instead of USB:

  • Re-enter BIOS and verify the boot order has USB first. Save and exit.
  • If using the one-time boot menu, make sure you select the correct USB entry (not “Windows Boot Manager”).
  • Disable “Fast Boot” in the BIOS. Fast Boot can skip USB initialization.

Secure Boot error:

  • If you see a Secure Boot violation, enter BIOS, go to Security → Secure Boot, and set it to Disabled. Then try booting again.

BIOS key not working:

  • Some Lenovo models use a “Novo Button” (a small button next to the power button) to enter the boot menu or BIOS. Press it while the computer is off.
  • Try repeatedly pressing the key as soon as you power on, rather than holding it.

Frequently Asked Questions

Q: What key do I press to enter BIOS on a Lenovo?
A: Most Lenovo laptops and desktops use F2 (or Fn+F2) to enter BIOS. Some models use F1 or the Novo Button.

Q: How do I boot from USB without changing BIOS settings?
A: Press F12 (or Fn+F12) during startup to open the one-time boot menu, then select your USB drive.

Q: My Lenovo doesn’t see the USB drive. What’s wrong?
A: The USB may not be bootable, the port may be incompatible, or Secure Boot may be blocking it. Try recreating the USB, using a different port, and temporarily disabling Secure Boot.

Q: Should I use UEFI or Legacy boot mode?
A: For modern Windows and Linux installations, use UEFI. If your USB was created for Legacy (MBR), you may need to switch to Legacy mode temporarily, but UEFI is recommended for new systems.

Q: Can I boot from a USB with Secure Boot enabled?
A: Yes, if the USB is properly signed (like official Windows media). For unofficial media, you may need to disable Secure Boot temporarily.

Q: How do I create a bootable USB for UEFI?
A: Use Rufus and select “GPT” as the partition scheme and “UEFI (non CSM)” as the target system. For Windows, you can also use the Media Creation Tool.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →