This guide shows you how to change the sound your iPhone alarm plays, so you can wake up to something you actually like instead of the default radar beep. You’ll learn how to pick a built-in ringtone, use a song from your library, and adjust the alarm volume. No special apps or technical skills are needed—just your iPhone and a few taps.
What You’ll Need
- An iPhone running iOS 14 or later (the steps are nearly identical on older versions).
- The Clock app, which is pre-installed on every iPhone.
- If you want to use a song as your alarm, the song must be downloaded to your iPhone’s Music library (not just streamed).
Step-by-Step
- Open the Clock app. It’s the icon that looks like a clock, usually on your home screen or in a folder. Tap it to launch.
- Go to the Alarm tab. At the bottom of the screen, you’ll see four tabs: World Clock, Alarm, Stopwatch, and Timer. Tap “Alarm.”
- Tap Edit (top-left) or the + button. To change an existing alarm, tap “Edit” in the top-left corner, then tap the alarm you want to modify. To create a new alarm, tap the “+” button in the top-right corner.
- Tap “Sound” (or “Sound & Haptics”). This is the row that shows the current sound name, like “Radar” or “By the Seaside.” Tapping it opens the sound picker.
- Choose a sound from the list. You’ll see a long list of built-in ringtones and alert tones. Tap any of them to hear a preview. The sound will play immediately, so you can decide if it’s right for you. The currently selected sound has a checkmark next to it.
- To use a song from your music library, scroll to the top of the sound list. Tap “Song” (it’s usually the first option). This opens your Music library. Browse or search for the song you want. Tap it to select it—it will start playing as a preview.
- Tap “Back” (top-left) to return to the alarm settings. The sound you selected will now appear next to “Sound.”
- Tap “Save” (top-right) to confirm your changes. If you’re editing an existing alarm, the save button is in the top-right corner. If you’re creating a new alarm, you’ll also need to set the time and other options before saving.
That’s it—your alarm will now use the new sound. The next time the alarm goes off, it will play the selected ringtone or song. If you chose a song, it will play from the beginning (or from a 30-second preview, depending on the song’s length and your iOS version).
Common Mistakes
- Forgetting to tap “Save” after changing the sound. If you just back out without saving, your change won’t stick.
- Choosing a song that isn’t downloaded. If the song is only in your cloud library (not downloaded to your iPhone), the alarm may not play it, or it may play a default sound instead. Make sure the song is downloaded by tapping the cloud icon next to it in the Music app.
- Confusing alarm sound with the ringtone. The alarm sound is separate from your phone’s ringtone (for calls). Changing your ringtone in Settings > Sounds & Haptics does not change the alarm sound.
- Setting the volume too low. The alarm volume is tied to the ringer volume (unless you enable “Change with Buttons” in Settings > Sounds & Haptics). If your ringer is on silent or very low, the alarm may be too quiet to wake you.
Tips
- Use a song with a gradual build-up if you’re a light sleeper—it’s less jarring than a harsh beep.
- Test your alarm sound right after setting it. Tap the sound in the list to hear it, and then set the alarm a minute ahead to confirm it plays correctly.
- Adjust the alarm volume separately. Go to Settings > Sounds & Haptics (or Settings > Sounds on older iOS) and drag the “Ringer and Alerts” slider. If you want the alarm to be loud even when the ringer is low, turn off “Change with Buttons” so the volume buttons don’t affect the alarm volume.
- Use the “Haptics” option (available on iPhone 8 and later) to add a vibration pattern to your alarm. In the sound picker, you’ll see a “Haptics” section—tap it to choose a pattern like “Symphony” or “Accent.”
- If you use a song, trim it to a 30-second clip for a shorter alarm. You can do this in the Music app by editing the song’s start and stop times (on a Mac or PC), or use a third-party app to create a ringtone file.
Troubleshooting
- The alarm plays the default sound even after I changed it. First, make sure you tapped “Save” after selecting the sound. If you did, try restarting your iPhone—this often fixes minor glitches. If the problem persists, delete the alarm and create a new one from scratch.
- The song I selected doesn’t play. This usually means the song isn’t downloaded to your device. Open the Music app, find the song, and tap the cloud icon to download it. If the song is a DRM-protected purchase from an old account, it may not play as an alarm—try a different song.
- The alarm volume is too low. Check the “Ringer and Alerts” volume in Settings > Sounds & Haptics. Also, make sure your iPhone isn’t in Silent mode (the switch on the side). If the switch is orange, your phone is on silent, and the alarm might be quieter (though it should still play).
- I can’t find the “Song” option in the sound list. If you don’t see “Song” at the top, scroll down—it’s usually the first item under the “Ringtones” section. If it’s still missing, your iPhone might have restricted media access in Screen Time settings. Go to Settings > Screen Time > Content & Privacy Restrictions > Media & Apple Music and make sure it’s set to “Allow.”
- The alarm doesn’t go off at all. This is rarely related to the sound, but if you’ve changed the sound and the alarm stops working, try restarting your iPhone. Also, check that the alarm is actually enabled (the toggle next to the time is green). If you use Bedtime (in the Clock app’s Bedtime tab), that has its own sound setting—change it there too.
Frequently Asked Questions
Can I use any song from my music library as an alarm?
Yes, as long as the song is downloaded to your iPhone. Streaming-only songs (those not downloaded) may not play. You can download a song by tapping the cloud icon next to it in the Music app.
Why does my alarm only play a 30-second clip of the song?
By default, iOS plays a 30-second preview of a song as the alarm sound. To play the full song, you’d need to create a ringtone file (M4R) that is longer than 30 seconds, but standard ringtones are limited to 30 seconds. Some users find that the full song plays if the song is short (under 30 seconds) or if you use a workaround with a third-party app.
How do I make the alarm louder than my ringtone?
Go to Settings > Sounds & Haptics and drag the “Ringer and Alerts” slider to maximum. If you want the volume buttons to control the alarm separately, turn off “Change with Buttons.” Then you can use the volume buttons on the side of the iPhone to adjust the alarm volume independently while the alarm is sounding.
Does the alarm sound change if I put my iPhone on silent mode?
No, the alarm will still play even if your iPhone is on silent. However, the volume might be lower if the ringer volume is low. To ensure the alarm is loud, keep the ringer volume up or use the “Change with Buttons” setting to control it separately.
Can I set different sounds for different alarms?
Yes, each alarm has its own sound setting. Simply edit each alarm individually and choose a different sound for each. This is useful for distinguishing between morning wake-up and afternoon reminders.
Why doesn’t my custom ringtone appear in the alarm sound list?
Custom ringtones you’ve created or downloaded (M4R files) should appear in the “Ringtones” section of the sound list. If they don’t, make sure they are properly synced to your iPhone via Finder (on macOS Catalina or later) or iTunes (on Windows or older macOS). If you created the ringtone with a third-party app, check that the app exported it correctly.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Fix Text Cursor Turning White in Windows 11
- Force Quit Non-Responding Apps on Mac: 6 Ways
- Chromebook Not Charging? Fix It Fast
- iPhone Won’t Make Calls but Texts Work? Fixes
- Android to iPhone Hotspot: Connect & Fix Issues
- Fix d3dx9 38.dll Missing or Not Designed to Run on Windows