sodcalculator

10 Tech How-To

Network Discovery in Windows 10: How to Turn It On

Guide 10-53355 · Updated · Step by step

Network discovery is the Windows feature that lets your PC see other computers and devices on the same local network, and lets them see yours. Turning it on is required for file sharing, media streaming, and accessing a network-attached storage (NAS) drive. This guide walks you through enabling it in the Settings app and the classic Control Panel, plus how to fix it when it won’t stay on.

What You’ll Need

  • A Windows 10 PC with administrator rights (you’ll need to confirm a User Account Control prompt).
  • Your PC connected to the same Wi-Fi or Ethernet network as the devices you want to see.
  • The network profile set to Private (not Public) for discovery to work reliably.

Step-by-Step

Method 1: Using the Settings App (Recommended)

  1. Click the Start button and select the Settings gear icon (or press Windows + I).
  2. Click Network & Internet.
  3. In the left sidebar, click Status (if it’s not already selected).
  4. Under “Change your network settings,” click Sharing options. This opens the classic Control Panel window.
  5. In the new window, expand the Private profile section by clicking the chevron (down arrow) next to it.
  6. Select Turn on network discovery.
  7. Check the box that says Turn on automatic setup of network connected devices if you want Windows to automatically configure devices like printers and smart TVs.
  8. Click Save changes at the bottom. If prompted by User Account Control, click Yes.

Method 2: Using Control Panel Directly

  1. Press Windows + R to open the Run dialog.
  2. Type control and press Enter.
  3. Click Network and Sharing Center.
  4. In the left sidebar, click Change advanced sharing settings.
  5. Expand the Private profile (or “Guest or Public” if you want it for public networks, though this is not recommended).
  6. Select Turn on network discovery and optionally check the “automatic setup” box.
  7. Click Save changes.

Method 3: Turning It On via the Network Flyout

  1. Click the network icon in the system tray (bottom-right corner).
  2. Click Network & Internet settings.
  3. Click Sharing options (same as Step 4 in Method 1).
  4. Follow steps 5–8 from Method 1.

Common Mistakes

  • Leaving the network profile as “Public.” Network discovery is off by default on public networks for security. If your Wi-Fi is marked “Public,” Windows will not let you turn it on (the radio button will be grayed out). Change the profile to “Private” first.
  • Forgetting to save changes. If you close the window without clicking “Save changes,” nothing happens.
  • Disabling the “Function Discovery” services. Network discovery depends on several Windows services. If you or a “tuning” tool disabled them, the toggle will turn on but not work.
  • Using a VPN or a guest Wi-Fi network. Many VPNs and guest networks isolate devices, so discovery won’t work even when enabled.

Tips

  • Always use the Private profile for home or office networks you trust. For coffee shop or airport Wi-Fi, keep discovery off.
  • If you only need to share files, you can leave “File and printer sharing” off and just enable discovery – but most people want both on.
  • After enabling, open File Explorer and click Network in the left sidebar to see discovered devices. It can take a minute or two to populate.
  • If you have a mixed network (Windows, Mac, Linux), discovery may not show all devices. Check your router’s admin page for a complete list of connected devices.

Troubleshooting

Network Discovery Won’t Turn On

  1. Check your network profile: Go to Settings > Network & Internet > Status. Click Properties under your active connection. Under “Network profile,” select Private.
  2. Run the network troubleshooter: Settings > Update & Security > Troubleshoot > Additional troubleshooters > Network Adapter – run it and see if it finds issues.
  3. Restart the required services: Press Windows + R, type services.msc, press Enter. Find each of these, right-click and select Restart: Function Discovery Provider Host, Function Discovery Resource Publication, SSDP Discovery, and UPnP Device Host. Set their startup type to Automatic (right-click > Properties).

Discovery Is On But Other Computers Don’t Appear

  1. Make sure all devices are on the same subnet (e.g., all on 192.168.1.x). Check your router’s DHCP settings.
  2. Check your firewall: Windows Defender Firewall should automatically allow network discovery when you turn it on, but a third-party firewall may block it. Temporarily disable it to test, then re-enable and add an exception.
  3. Check if the other computer has network discovery enabled too. It’s a two-way street.
  4. In File Explorer, click in the address bar and type \\[IP address] (e.g., \\192.168.1.10) to directly connect to a known device – this bypasses discovery.

Discovery Keeps Turning Itself Off

  1. This usually happens because your network profile switched back to “Public.” Re-check the profile as in the first troubleshooting step.
  2. Check if a group policy is enforcing it: Press Windows + R, type gpedit.msc (Pro/Enterprise only). Navigate to Computer Configuration > Administrative Templates > Network > Link-Layer Topology Discovery. Ensure “Enable LLTDIO” and “Enable Responder” are set to Enabled or Not Configured.
  3. Some antivirus suites have a “network protection” feature that disables discovery. Look for a setting like “Block network discovery” in your AV’s firewall settings.

Frequently Asked Questions

Is network discovery safe?

On a private, trusted network, yes. On a public network, it exposes your device name and presence to others. Keep it off for public Wi-Fi.

What’s the difference between network discovery and file sharing?

Network discovery only lets your PC see other devices and be seen. File sharing is what actually lets you open or copy files from those devices. You need both for full access.

Why can I see my PC but not my phone?

Phones often use a different discovery protocol (like mDNS/Bonjour) that Windows doesn’t natively support for browsing. You can still connect to a phone’s shared folder by entering its IP address directly.

Does network discovery work on a domain network?

Yes, but it’s usually controlled by Group Policy from the domain administrator. You may not be able to change it on a work computer.

I turned it on, but my NAS drive doesn’t show up. What now?

Make sure the NAS has SMB (Server Message Block) enabled and is on the same network. Try connecting directly via \\NAS-IP-Address in File Explorer’s address bar.

Will enabling network discovery slow down my internet?

No. It only affects local network traffic, not your internet connection speed. It does send a few small broadcast packets periodically, but these are negligible.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →