sodcalculator

10 Tech How-To

Face ID Not Working on iPad? 9 Fixes to Try

Guide 10-53243 · Updated · Step by step

If Face ID has stopped working on your iPad, the fix is usually a simple setting, a clean camera lens, or a software update—but it can also mean a hardware issue that needs Apple support. Below are the most effective troubleshooting steps, ordered from quickest to most involved, so you can get Face ID back quickly.

How Face ID Works on iPad

Face ID on iPad uses the TrueDepth camera system—a combination of an infrared camera, a flood illuminator, a dot projector, and the front camera—to map and recognize your face. Unlike Touch ID, it doesn’t store a fingerprint; it creates a mathematical model of your face and encrypts it in the Secure Enclave. This means it works in the dark (thanks to the flood illuminator), adapts to changes like glasses or a beard (after you set up an “Alternate Appearance”), and only unlocks when your eyes are open if you have “Require Attention for Face ID” enabled.

Quick Checks Before You Troubleshoot

Before diving into deeper fixes, rule out the obvious:

  • Check if Face ID is disabled: Go to Settings > Face ID & Passcode. If you see “Face ID is turned off” or a message that it’s been disabled due to too many failed attempts, you need to enter your passcode to re-enable it.
  • Restart your iPad: A simple restart clears temporary software glitches. Press and hold the top button and either volume button until the slider appears, then slide to power off. Wait 30 seconds, then turn it back on.
  • Check for a screen protector or case: Some screen protectors (especially those with a privacy filter) or cases that cover the top edge of the iPad can block the TrueDepth camera. Remove them and test Face ID.

Clean the TrueDepth Camera

Dirt, dust, or smudges on the front camera area can block the infrared sensors. Use a soft, lint-free cloth (like the one for eyeglasses) to gently wipe the top of the iPad where the camera is. Do not use water or cleaning sprays—they can damage the coating. After cleaning, try setting up Face ID again.

Check Face ID Settings and Permissions

Sometimes Face ID is working but only disabled for certain apps. Go to Settings > Face ID & Passcode and make sure the toggles are on for the features you want:

  • iPhone Unlock (if you have an iPhone with Face ID and want to unlock it with your iPad)
  • iTunes & App Store (to use Face ID for purchases)
  • Wallet & Apple Pay (if you use Apple Pay on iPad)
  • Auto-Unlock (for password autofill)

Also, check Settings > Screen Time > Content & Privacy Restrictions—if “Account Changes” or “Passcode Changes” are restricted, Face ID might be blocked. Ensure “Face ID” is allowed under Allowed Apps.

Update iOS (or Restore from Backup)

Software bugs can cause Face ID to fail. Go to Settings > General > Software Update and install any available iPadOS update. If you’re already up to date but Face ID still fails, try resetting all settings (this does not delete your data): Settings > General &em; Transfer or Reset iPad > Reset > Reset All Settings. You’ll need to re-enter Wi-Fi passwords and re-enable some preferences, but your photos and apps remain.

Reset Face ID and Set It Up Again

If Face ID is still not working, reset the face data and start fresh:

  1. Go to Settings > Face ID & Passcode.
  2. Tap Reset Face ID.
  3. Tap Set Up Face ID and follow the on-screen instructions. Make sure you hold the iPad at eye level and move your head slowly in a circle.

If you wear glasses, try setting up Face ID without them, then add an “Alternate Appearance” with your glasses on. Also, if you have a face covering (like a mask), set up an alternate appearance with the mask on—but note that Face ID on iPad does not support the “Face ID with a Mask” feature that iPhones have, so this might not work as well.

Hardware Issues and Apple Support

If none of the above fixes work, the problem is likely hardware-related. The TrueDepth camera can fail due to physical damage, water exposure, or a manufacturing defect. Check if your iPad is still under warranty or AppleCare+. You can contact Apple Support, make a Genius Bar appointment, or send it in for repair. If you see a message like “Face ID has been disabled” after a repair, it’s a security feature—Apple locks Face ID if the camera is replaced by a non-authorized technician. Only Apple or an Apple Authorized Service Provider can fix this.

Frequently Asked Questions

Why does Face ID stop working after a screen replacement?

On iPads, the TrueDepth camera is paired with the original screen. If a repair shop replaces the screen without transferring the original camera assembly, Face ID will not work. Even with a genuine Apple screen, the camera must be properly calibrated. That’s why Apple requires that Face ID repairs be done by them or an authorized provider—otherwise, the system disables Face ID for security.

Can Face ID work with a mask on iPad?

Unlike iPhone, iPad does not have a dedicated “Face ID with a Mask” option. However, you can try setting up an “Alternate Appearance” while wearing the mask. This may work if the mask doesn’t cover your eyes and the TrueDepth camera can still see enough of your face. But it’s not guaranteed, and Apple doesn’t officially support it on iPad.

Does Face ID work in the dark?

Yes. Face ID uses an infrared flood illuminator and dot projector, so it works in complete darkness. If it’s not working at night, make sure “Require Attention for Face ID” is off (if you don’t want to look at the screen) and that the TrueDepth camera isn’t blocked by a case or screen protector.

Why does Face ID fail with sunglasses?

Some sunglasses block infrared light, which prevents the TrueDepth camera from seeing your eyes. If you have “Require Attention for Face ID” enabled, Face ID will fail. Turn that off in Settings > Face ID & Passcode to allow unlocking without eye contact. Alternatively, set up an “Alternate Appearance” wearing those sunglasses.

What does “Face ID is not available” mean?

This message usually appears when the TrueDepth camera is damaged or disconnected. It can also appear after a failed software update or if the iPad is too hot or cold. Try restarting and updating iOS first. If the message persists, it’s a hardware issue that requires repair.

How many times can I try Face ID before it locks?

After five failed attempts, Face ID will require your passcode. After more failures, it will disable Face ID entirely until you enter your passcode. This is a security feature to prevent someone else from trying to unlock your iPad with your face.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →