sodcalculator

10 Tech How-To

How to Connect Canon Printer to WiFi Easily

Guide 10-43246 · Updated · Step by step

This guide walks you through connecting your Canon printer to your Wi-Fi network, whether you’re using the printer’s own menu, a WPS button, or a computer. You’ll be able to print wirelessly from any device on the same network in about five minutes.

What You’ll Need

  • Your Canon printer, powered on and out of “sleep” mode
  • Your Wi-Fi network name (SSID) and password
  • Access to the printer’s control panel (touchscreen or buttons)
  • If using WPS: a router with a WPS button (often labeled “WPS” or showing two curved arrows)
  • Optional: a USB cable for a computer-based setup (only if the wireless method fails)

Step-by-Step

  1. Prepare the printer. Turn the printer on and make sure it’s not showing an error. Load paper if you plan to print a network settings page later.
  2. Open the wireless menu. On the printer’s touchscreen, tap Settings (the wrench icon) or Menu. Then select Wireless LAN or Network Settings. On older models with a text display, use the arrow buttons to navigate to Wireless LAN Setup.
  3. Choose the setup method. You’ll typically see two options: Wireless LAN Setup Wizard (or “Easy Setup”) and WPS (Push Button). Start with the wizard—it works on every router. WPS is faster but not all routers support it.
  4. If using the Setup Wizard:
    1. Select Wireless LAN Setup Wizard and press OK.
    2. The printer scans for networks. Wait for the list to appear.
    3. Choose your Wi-Fi network name from the list. If you don’t see it, select Other or Manual Entry and type the SSID exactly (case-sensitive).
    4. Enter your Wi-Fi password using the on-screen keyboard. Be careful with uppercase/lowercase and special characters.
    5. Press OK or Connect. The printer will attempt to join the network.
  5. If using WPS:
    1. On the printer, select WPS (Push Button).
    2. Within 2 minutes, press the WPS button on your router. Hold it for a few seconds until the router’s WPS light blinks.
    3. Wait for the printer to show a success message. No password is needed.
  6. Confirm the connection. After a successful setup, the printer’s Wi-Fi icon should become solid (not blinking). Print a network settings page to verify: go to Settings > Network Settings > Print Network Settings (or hold the Resume/Cancel button for 3 seconds on some models). The page shows the SSID and IP address—check that the SSID matches your network.
  7. Install the driver on your computer (if needed). If your computer doesn’t automatically detect the printer, download the latest driver from the Canon support site for your model. During installation, choose Wireless Connection and follow the prompts. The installer will usually find the printer on your network.
  8. Test print. Send a test page from your computer or phone. On Windows, go to Settings > Devices > Printers & Scanners, select your printer, and click Print Test Page.

Common Mistakes

  • Entering the wrong password. Wi-Fi passwords are case-sensitive. Double-check for uppercase letters and symbols.
  • Choosing the wrong network. If you have a dual-band router (2.4 GHz and 5 GHz), both may appear as separate SSIDs. Most Canon printers only support 2.4 GHz, so choose the network that doesn’t end in “5G” or “-5G”.
  • Printer too far from the router. A weak signal can cause the setup to fail or the connection to drop later. Move the printer closer temporarily.
  • Skipping the WPS timeout. If you press the router’s WPS button too early or too late, the connection fails. Start the printer’s WPS mode first, then press the router button.
  • Not checking for a firewall prompt. On Windows, a firewall pop-up may appear during driver installation—click Allow to let the printer communicate.

Tips

  • Use the Setup Wizard instead of WPS when possible—it’s more reliable and lets you verify the network name.
  • If your router broadcasts both bands, temporarily disable the 5 GHz band in the router settings during setup to avoid confusion, then re-enable it.
  • Keep your printer’s firmware updated. Canon periodically releases updates that improve Wi-Fi stability. Check the Canon support page for your model.
  • For a static IP (if you have many devices), assign one in your router’s DHCP reservation settings after the printer is connected. This prevents the printer’s IP from changing.
  • If you ever change your Wi-Fi password, you’ll need to reconnect the printer using the same steps.

Troubleshooting

  • Printer not found during setup. Make sure the printer is not in sleep mode (press any button to wake it). Also, restart both the printer and router, then try again.
  • Connection succeeds but printing fails. Check that your computer/phone is on the same network as the printer. If you have a guest network, the printer won’t be visible. Also, restart the printer and the device you’re printing from.
  • Wi-Fi icon blinks continuously. This usually means the printer lost the connection. Move it closer to the router, check the router’s status, and re-run the setup wizard.
  • WPS button doesn’t work. Some routers have WPS disabled by default. Log into your router’s admin page and enable WPS, or just use the Setup Wizard.
  • Driver installation can’t find the printer. Temporarily connect the printer to your computer with a USB cable, run the driver installer, and choose Wireless Connection when prompted. The installer will use the USB to configure Wi-Fi, then you can unplug the cable.
  • Printer shows “Cannot connect to network.” Verify that your router broadcasts the SSID (hidden networks require manual entry). Also, check if your router has a MAC address filter—if so, add the printer’s MAC address (found on the network settings page).

Frequently Asked Questions

Do I need a USB cable to connect my Canon printer to Wi-Fi?

No. Most Canon printers can connect directly via the control panel or WPS. A USB cable is only needed as a fallback for driver installation if the wireless method fails.

Why does my Canon printer only see the 5 GHz network?

Some newer Canon models support 5 GHz, but many only support 2.4 GHz. If you see only 5 GHz, check your router settings—you may need to enable a combined SSID or connect to the 2.4 GHz band.

Can I connect my Canon printer to Wi-Fi without a router?

Yes, you can use Canon’s Wireless Direct mode, which creates a direct Wi-Fi connection between the printer and your device. However, this doesn’t allow other devices on your network to print—it’s only for a single connection.

How do I find my Canon printer’s IP address?

Print a network settings page (see Step 6) or go to the printer’s Network Status menu. The IP address is listed there. You can also find it in your router’s connected devices list.

Why does my Canon printer keep disconnecting from Wi-Fi?

Common causes: distance from the router, interference from other electronics, or the printer’s power saving mode. Try moving the printer closer, updating firmware, and disabling the printer’s sleep mode if possible.

Can I connect my Canon printer to Wi-Fi using my phone?

Yes. Install the Canon PRINT app (iOS/Android), connect your phone to the same Wi-Fi, and the app will guide you through the setup. The app also lets you print from your phone afterward.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →