sodcalculator

10 Tech How-To

Connect Samsung Galaxy Buds to Android & Galaxy Wearable

Guide 10-51351 · Updated · Step by step

This guide walks you through connecting Samsung Galaxy Buds to an Android phone or tablet, both through the standard Bluetooth settings and through the Galaxy Wearable app. The Galaxy Wearable app is the recommended method because it unlocks full features like equalizer settings, touch controls, and firmware updates, while the standard Bluetooth route works for a quick connection.

What You’ll Need

  • Samsung Galaxy Buds (any model: Buds, Buds+, Buds Live, Buds Pro, Buds2, Buds2 Pro, Buds FE, etc.) and their charging case
  • An Android phone or tablet running Android 8.0 or later (Samsung phones work best, but any Android device is compatible)
  • The Galaxy Wearable app installed on your phone (download it from the Google Play Store if it isn’t already installed)
  • Both earbuds placed in the charging case with enough battery to power on

Step-by-Step

Method 1: Using the Galaxy Wearable App (Recommended)

  1. Install the Galaxy Wearable app. Open the Google Play Store on your Android device, search for “Galaxy Wearable,” and install it. If you have a Samsung phone, the app may already be installed.
  2. Open the Galaxy Wearable app. Tap the app icon to launch it. You will see a welcome screen prompting you to get started.
  3. Put your Buds in pairing mode. Place both earbuds inside the charging case and close the lid. Then, open the lid. The buds should automatically enter pairing mode if they have never been connected to a device before. If they have been connected previously, press and hold the touchpads on both earbuds simultaneously for about 3-5 seconds until you hear a chime or see the LED indicator blink blue.
  4. Tap “Get Started” in the app. The app will begin scanning for nearby devices. Make sure your phone’s Bluetooth is turned on.
  5. Select your Buds from the list. When you see your specific model (e.g., “Galaxy Buds2 Pro”) appear on the screen, tap it.
  6. Accept the connection request. A pop-up will appear asking you to confirm the Bluetooth pairing. Tap “OK” or “Connect.”
  7. Follow the on-screen setup prompts. The app may ask you to grant permissions (like location access for finding your earbuds) and to update the firmware if an update is available. Complete these steps as prompted.
  8. Wait for the connection to complete. Once the setup is finished, you will see the main Galaxy Wearable dashboard showing the battery levels of each earbud and the case, along with all the customization options.

Method 2: Using Standard Android Bluetooth Settings

  1. Open your phone’s Settings. Swipe down from the top of the screen to open the notification shade, then tap the gear icon.
  2. Go to Connections (or Bluetooth). On Samsung phones, tap “Connections” and then “Bluetooth.” On other Android phones, look for a “Bluetooth” option directly in the Settings menu.
  3. Turn on Bluetooth. Toggle the Bluetooth switch to the “On” position.
  4. Put your Buds in pairing mode. As in the previous method, place the earbuds in the case, open the lid, and if they don’t automatically enter pairing mode, press and hold the touchpads on both earbuds for 3-5 seconds until the LED blinks blue.
  5. Tap “Scan” or look under “Available devices.” Your phone will search for nearby Bluetooth devices.
  6. Select your Buds. Tap the name of your Galaxy Buds (e.g., “Galaxy Buds Live”) from the list of available devices.
  7. Confirm the pairing. A pairing request may appear on both your phone and the earbuds. Confirm on the phone by tapping “Pair” or “OK.”
  8. Wait for the connection. Once paired, you will see “Connected” under the device name. The buds will now work for audio, but you won’t have access to the advanced features until you open the Galaxy Wearable app.

Common Mistakes

  • Forgetting to charge the case: If the case is dead, the earbuds won’t power on or enter pairing mode. Always ensure the case has battery.
  • Not putting both earbuds in the case: Some models require both earbuds to be in the case to initiate pairing mode. If only one is in, it may not work.
  • Connecting via Bluetooth first, then expecting full features: A standard Bluetooth connection only provides basic audio. You must open the Galaxy Wearable app to unlock features like noise cancelling settings, equalizer, and touch controls.
  • Ignoring the firmware update prompt: Skipping a firmware update can lead to connection drops or missing new features. Always allow the update to complete when prompted.
  • Holding the touchpads too long or too short: The timing for entering pairing mode is specific. Holding too briefly won’t trigger it, and holding too long might reset the earbuds.

Tips

  • Use the Galaxy Wearable app for everything: It is the central hub for managing your Buds. You can rename them, check battery, adjust touch pad controls, and enable features like “Find My Earbuds.”
  • Keep your phone’s Bluetooth on: When you open the case lid near your phone, the buds will automatically reconnect to the last paired device.
  • Reset the buds if you’re selling or gifting them: In the Galaxy Wearable app, go to “General” > “Reset” to wipe the earbuds and disconnect them from your account.
  • Check for app updates: Keep the Galaxy Wearable app updated to ensure compatibility with your phone’s operating system and to get the latest features.
  • Use the “Labs” features: In the Galaxy Wearable app, look for a “Labs” section. It often contains experimental features like “Double tap earbud edge” for volume control.

Troubleshooting

  • The buds don’t appear in the app or Bluetooth list: First, make sure they are charged. Then, place them in the case, close the lid, wait 5 seconds, and open it again. If they still don’t appear, manually enter pairing mode by holding the touchpads for 5 seconds until the LED blinks blue.
  • Connection keeps dropping: Go to your phone’s Bluetooth settings, find the buds, and tap “Forget” or “Unpair.” Then, re-pair them using the Galaxy Wearable app. Also, check for interference from other Bluetooth devices or Wi-Fi routers.
  • Only one earbud connects: Place both earbuds back in the case, close the lid, and wait 10 seconds. Open the lid and check if both appear in the app. If not, reset the buds through the app’s “General” > “Reset” option.
  • The Galaxy Wearable app says “Device not supported”: This usually means your phone’s operating system is too old, or the app version is incompatible. Update your phone’s OS and the app, then restart your phone.
  • Audio is choppy or stuttering: Move your phone closer to the buds and remove any obstacles. Also, disable Bluetooth on other devices that might be interfering. If the issue persists, reset the buds.
  • Buds won’t turn on at all: Connect the charging case to a power source with a USB-C cable and let it charge for at least 15 minutes. Then try again.

Frequently Asked Questions

Do Samsung Galaxy Buds work with any Android phone?

Yes, they work with any Android phone running Android 8.0 or later. You need the Galaxy Wearable app for full features, but basic Bluetooth audio works on any Android device.

Can I connect my Galaxy Buds to two devices at once?

No, Galaxy Buds do not support simultaneous multi-point connection. You must manually switch between devices by disconnecting from one and connecting to the other.

Why won’t my Galaxy Buds enter pairing mode?

Make sure they have battery charge. Place them in the case, close the lid, wait a few seconds, then open it. If they still don’t pair, press and hold both touchpads for about 5 seconds until the LED blinks blue.

How do I reset my Galaxy Buds?

Open the Galaxy Wearable app, go to “General,” then tap “Reset.” This will erase all settings and unpair them from your phone. You can then set them up as new.

Do I need the Galaxy Wearable app to use the buds?

No, you can use them as standard Bluetooth headphones without the app. However, the app is required to change the equalizer, enable noise cancelling, customize touch controls, and install firmware updates.

Why is the sound only coming from one earbud?

This usually indicates a connection issue. Place both earbuds in the case, close the lid for 10 seconds, then reopen and reinsert them into your ears. If the problem continues, reset the buds via the app.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →