sodcalculator

10 Tech How-To

Create Bootable USB macOS Sierra Installer

Guide 10-55156 · Updated · Step by step

This guide walks you through creating a bootable USB installer for macOS Sierra 10.12, the final release of that version. You’ll end up with a USB drive that can install Sierra on a compatible Mac, perform a clean install, or recover a system that won’t boot. You’ll need a Mac running macOS, the Sierra installer app, and an 8GB or larger USB drive.

What You’ll Need

  • A Mac running macOS (any recent version, including Sierra itself or later).
  • The macOS Sierra installer app, named Install macOS Sierra.app. If you don’t have it, download it from the App Store (you may need to search for it; Apple often keeps older installers available under your Purchased tab).
  • A USB flash drive with at least 8GB of storage. It will be completely erased, so back up anything on it.
  • About 20 minutes of time and a stable power connection for your Mac.

Step-by-Step

  1. Download the installer – Open the App Store on your Mac, search for “macOS Sierra,” and click Get/Download. If you already have it in your Applications folder, skip to step 2. The file will appear as Install macOS Sierra.app in your Applications folder.
  2. Insert the USB drive – Plug your USB flash drive into your Mac. If it has any files, copy them elsewhere first.
  3. Open Disk Utility – Go to Applications → Utilities → Disk Utility (or use Spotlight with Cmd+Space and type “Disk Utility”).
  4. Erase the USB drive – In Disk Utility, select your USB drive from the sidebar (the top-level item, not the volume below it). Click Erase. Set the format to Mac OS Extended (Journaled) and the scheme to GUID Partition Map. Name it something simple like “MyVolume” (no spaces, to avoid command issues). Click Erase and wait for it to finish.
  5. Close Disk Utility – Once the erase is complete, quit Disk Utility.
  6. Open Terminal – Go to Applications → Utilities → Terminal (or search via Spotlight).
  7. Run the createinstallmedia command – Type (or copy-paste) the following command, but replace MyVolume with the exact name you gave your USB drive:
    sudo /Applications/Install\ macOS\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install\ macOS\ Sierra.app --nointeraction

    Press Enter. You’ll be asked for your administrator password. Type it (it won’t show as you type) and press Enter again.

  8. Wait for the process to complete – Terminal will show a progress bar and may appear to “hang” at 0% for a minute or two. This is normal. It will eventually say “Erasing disk: 0%… 10%… 100%” and then “Copying installer files to disk…”. The whole process takes 10-20 minutes depending on your USB drive speed. Do not unplug the drive or close Terminal until you see the final message: “Install media now ready at /Volumes/MyVolume”.
  9. Eject the USB drive – When done, type exit and press Enter, or just close Terminal. Then eject the USB drive from Finder (right-click → Eject) and unplug it.

Your USB installer is now ready. To use it, plug it into the target Mac, restart it while holding the Option (Alt) key, and select the yellow/orange drive named “Install macOS Sierra” from the boot menu.

Common Mistakes

  • Using the wrong disk name in the command – If your volume name has spaces, you must escape them with a backslash (\ ) or the command will fail. Better yet, name it without spaces (e.g., “SierraUSB”).
  • Erasing the wrong drive – Double-check you selected the USB drive, not your internal hard drive. The command will erase whatever volume you point it to.
  • Forgetting to set the partition scheme to GUID – If you leave it as “Master Boot Record” or “Apple Partition Map,” the drive may not boot on Intel Macs.
  • Interrupting the process – If you unplug the USB or force-quit Terminal mid-copy, the drive will be unusable. Start over from step 4.
  • Using a USB 2.0 drive – It will work but take much longer. USB 3.0 is recommended but not required.

Tips

  • Use a high-quality USB drive; cheap ones can fail silently. A 16GB drive is ideal.
  • If your Mac is older and doesn’t support Sierra, this installer won’t help – check compatibility (Sierra supports Macs from late 2009 onward, but some later models need specific builds).
  • Keep the installer app in your Applications folder until you’ve successfully booted from the USB. You can delete it later.
  • For a clean install, you’ll need to format your internal drive in Disk Utility during the installation process (choose “Mac OS Extended (Journaled)” and GUID scheme).
  • If you’re creating the installer on a Mac running a newer macOS (like Catalina or later), the Terminal command still works, but you may need to right-click the installer app and select “Open” to bypass Gatekeeper if it’s not from the App Store.

Troubleshooting

  • “createinstallmedia: command not found” – The installer app is missing or not in the Applications folder. Download it again and make sure it’s named exactly Install macOS Sierra.app.
  • “/Volumes/MyVolume does not exist” – You used the wrong volume name. In Terminal, type ls /Volumes/ to see the exact name of your USB drive, then adjust the command.
  • The process stops at “Copying installer files to disk…” – This can take 10+ minutes. Be patient. If it hasn’t moved after 30 minutes, your USB drive may be failing. Try a different drive.
  • The USB doesn’t appear in the boot menu – Shut down the Mac, plug in the USB, then power on while holding Option. If it still doesn’t show, try a different USB port (preferably directly on the Mac, not a hub). Also ensure the drive was erased with GUID scheme.
  • “Install macOS Sierra.app is damaged” error – This often happens when the installer was downloaded from a non-Apple source. Re-download from the App Store. If you already have it, check the date and time on your Mac – an incorrect date can cause certificate issues.
  • You get “This copy of the Install macOS Sierra application is too old to be used on this version of macOS” – This occurs when running the installer on a newer macOS. Right-click the installer app, select “Show Package Contents,” go to Contents/Resources, and double-click createinstallmedia – but that’s advanced. Simpler: use the Terminal command with --nointeraction as shown; it usually bypasses this check.

Frequently Asked Questions

Can I use a USB drive with other data on it?

No, the process erases the entire drive. Back up any data first.

How long does the USB creation take?

Typically 10-20 minutes, depending on the speed of your USB drive and Mac. The progress bar may appear stuck at 0% for several minutes – that’s normal.

Will this USB work on any Mac?

Only on Macs that support macOS Sierra (most Macs from late 2009 onward, but check Apple’s compatibility list). It won’t work on newer Macs that require a different installer format (like those with Apple Silicon).

Can I use this USB to install Sierra on a Mac that already has a newer macOS?

Yes, you can perform a clean install, but you’ll need to erase the internal drive first. Note that downgrading may void some features or cause issues if the Mac’s firmware is newer.

Do I need to be an administrator to run the command?

Yes, you need admin privileges because the command uses sudo. You’ll be prompted for your admin password.

Can I use a Windows PC to create the USB?

No, the official method requires a Mac with Terminal. Third-party tools exist, but they are not reliable and may not produce a bootable drive for Sierra.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →