sodcalculator

10 Tech How-To

Disable Camera or Mic Access on Android 12

Guide 10-53597 · Updated · Step by step

Android 12 gives you fine-grained control over which apps can use your camera and microphone. This guide shows you how to revoke access for individual apps, use the quick settings toggles to block all access temporarily, and manage the privacy indicators that alert you when these sensors are in use. No special tools or root access are needed—everything is done through the Settings app.

What You’ll Need

  • An Android 12 device (Pixel phones and most 2021+ phones from Samsung, OnePlus, Xiaomi, etc.)
  • The device unlocked and on the home screen
  • Knowledge of which apps you want to restrict (optional but helpful)

Step-by-Step

Method 1: Revoke Access for a Specific App

  1. Open the Settings app. You can find it in your app drawer or by swiping down from the top of the screen and tapping the gear icon.
  2. Scroll down and tap Privacy.
  3. Tap Permission manager.
  4. Tap Camera or Microphone to see a list of apps that have requested that permission.
  5. Tap the app you want to restrict.
  6. Tap Don’t allow. If the app is currently in use, you’ll see a warning that the app will stop using the sensor immediately.
  7. Repeat for any other apps you want to block.

Method 2: Use Quick Settings Toggles (Block All Access)

  1. Swipe down from the top of the screen twice to open the full Quick Settings panel.
  2. Look for the Camera access and Mic access tiles. They look like a small camera and a microphone icon. If you don’t see them, swipe left on the tiles row to find them, or tap the pencil/edit icon to add them.
  3. Tap the tile to turn it off (grayed out). This immediately blocks all apps from using that sensor, even if they have permission.
  4. Tap the tile again later to re-enable access.

Method 3: Check and Manage Privacy Indicators

  1. When an app uses your camera or microphone, you’ll see a green dot (camera) or orange dot (mic) in the top-right corner of the screen.
  2. Swipe down once to open the notification shade. You’ll see a message like “Camera is on” or “Microphone is on.”
  3. Tap that message to see which app is using the sensor.
  4. Tap App info to go directly to that app’s settings, where you can revoke permission as described in Method 1.

Common Mistakes

  • Forgetting the Quick Settings toggle: Many users toggle the camera/mic access tile off and then wonder why an app still works. The tile only blocks access while it’s off—it doesn’t change the app’s permission. You must turn it back on when you want to use the sensor again.
  • Denying permission for system apps: Some system apps (like the camera app itself) may misbehave if you deny camera permission. If you block the camera app, you won’t be able to take photos until you re-enable it.
  • Not checking “While using the app” vs “Don’t allow”: Android 12 offers “Allow only while using the app” for some permissions. If you choose that, the app can still access the sensor when it’s open. To fully block, choose “Don’t allow.”
  • Assuming the green/orange dot is a bug: The indicator is a security feature, not a glitch. If you see it, an app is actively using the sensor.

Tips

  • Use the Quick Settings toggle when you want a temporary, system-wide block (e.g., during a meeting). It’s faster than going through Settings.
  • Review your permission list regularly. The Permission manager shows which apps have “Allow” and “Ask every time.” Revoke access for apps you no longer use.
  • If an app needs the camera for a specific feature (like scanning a QR code), you can grant “Ask every time” so you’re prompted each time rather than giving permanent access.
  • On Pixel phones, you can also tap the green/orange dot in the status bar to see which app is using the sensor—no need to swipe down.

Troubleshooting

  • I don’t see the Camera/Mic access tile in Quick Settings: Swipe down twice, tap the pencil icon (edit), then drag the tiles from the “Add” section into your active tiles. If they’re not there, your device manufacturer may have removed them—use the permission manager method instead.
  • An app still uses the camera after I denied permission: Some apps (especially browsers or system apps) have multiple ways to access the sensor. Check if the app has its own in-app permission settings, or restart the app. Also verify that the Quick Settings toggle is not off—if it’s off, it overrides your permission choice.
  • The green/orange dot appears even when I’m not using the app: This can happen if an app is running in the background. Tap the dot to see which app it is, then force-stop that app or revoke its permission.
  • I can’t find the Permission manager: On some Samsung devices, it’s under Settings > Privacy > Permission manager. On others, it might be under Settings > Apps > Special access. Search for “permission manager” in Settings if you can’t find it.
  • After blocking the camera, the camera app crashes: That’s expected—the camera app needs the camera permission. Re-enable it by going to Settings > Privacy > Permission manager > Camera, and select “Allow only while using the app.”

Frequently Asked Questions

Does disabling camera/mic access affect the system camera app?

Yes, if you deny camera permission to the system camera app, it won’t be able to take photos or record video. You’ll need to re-enable permission to use it again.

Will the Quick Settings toggle reset after a reboot?

No, the toggle stays as you left it. If you turn it off, it remains off until you turn it back on.

Can I set a specific app to ask every time?

Yes, in the Permission manager, tap the app, then choose “Ask every time.” The app will prompt you each time it wants to use the camera or mic.

What’s the difference between “Allow only while using the app” and “Ask every time”?

“Allow only while using the app” lets the app use the sensor when it’s open, but not in the background. “Ask every time” prompts you each time the app requests access, whether it’s in the foreground or background.

Is there a way to see which apps have used the camera in the past?

Android 12 doesn’t show a history log of sensor usage, but you can see the current active usage via the indicator. For a log, you’d need a third-party app, but that’s beyond the scope of this guide.

Do these steps work on Android 13 or 14?

Yes, the core functionality is the same, though the exact menu names may vary slightly. The privacy indicators and permission manager are still present in later versions.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →