sodcalculator

10 Tech How-To

Disable Print Spooler Service on Windows 10

Guide 10-54322 · Updated · Step by step

Disabling the Print Spooler service on Windows 10 stops background printing, which can resolve print queue hangs, improve security, and free up system resources. This guide walks you through disabling it via the Services console, PowerShell, or Command Prompt, and covers what to do if you need printing again later.

What You’ll Need

  • An administrator account on the Windows 10 PC
  • Optional: a backup of any pending print jobs (they will be lost)

Step-by-Step

  1. Save and close any documents you plan to print. Disabling the spooler will cancel all queued print jobs and may cause active printing to stop abruptly.
  2. Open the Services console. Press Win + R, type services.msc, and press Enter. If prompted by User Account Control, click Yes.
  3. Locate the Print Spooler service. Scroll down the list of services until you find Print Spooler. Its name in the list is Print Spooler, with a description that mentions managing all local and network print queues.
  4. Open its properties. Right-click Print Spooler and select Properties from the context menu.
  5. Stop the service. In the Properties window, on the General tab, click the Stop button. The service status will change from Running to Stopped. Wait a few seconds for it to fully stop.
  6. Disable the startup type. In the same General tab, find the Startup type drop-down menu. Change it from Automatic (or Manual) to Disabled.
  7. Apply and confirm. Click Apply, then OK to close the Properties window. The service is now disabled and will not start automatically on boot.
  8. Verify the change (optional). Restart your PC or just check the Services console again. The Print Spooler should still show Stopped and its startup type should read Disabled.

Alternative method using Command Prompt or PowerShell:

  1. Open Command Prompt or PowerShell as administrator (right-click the Start button and choose the appropriate option).
  2. Type the following command and press Enter to stop the service immediately:
    net stop spooler
  3. Then disable it for future boots with:
    sc config spooler start= disabled
    Note the space after start= – it is required.
  4. To re-enable later, use sc config spooler start= auto and net start spooler.

Common Mistakes

  • Forgetting to stop the service before disabling it. If you only change the startup type to Disabled, the service will keep running until the next restart. Always click Stop first.
  • Typing the service name wrong in commands. The service name is spooler, not printspooler or spoolsv. Using the wrong name gives an error.
  • Disabling the spooler when you still need to print. If you disable it and later try to print, nothing will happen and you may see an error. Only disable it if you are sure you don’t need printing temporarily.
  • Not running the command as administrator. Both net stop and sc config require elevated privileges. If you get “Access denied,” close and reopen the prompt as admin.

Tips

  • Use the Services console for a visual check. It shows the current status and startup type clearly, making it easier to confirm your changes.
  • Consider setting startup to Manual instead of Disabled. Manual allows the spooler to start only when needed (e.g., when you add a printer), but it won’t run at boot. This is a good middle ground if you print occasionally.
  • Clear the print queue before disabling. If you have stuck jobs, disabling the spooler won’t delete them permanently, but they may reappear when you re-enable it. Deleting files in C:\Windows\System32\spool\PRINTERS (as admin) can clear them, but do this only when the spooler is stopped.
  • Write down the original startup type. If you plan to re-enable later, note whether it was Automatic or Manual so you can restore the exact setting.

Troubleshooting

Service doesn’t stop or gives an error. Some print jobs may be stuck. Try restarting the PC first, then repeat the steps. If that fails, open Task Manager (Ctrl+Shift+Esc), go to the Services tab, find Spooler, right-click and choose Stop.

“Access denied” when using commands. Make sure you are running Command Prompt or PowerShell as administrator. Right-click the Start button and select Windows PowerShell (Admin) or Command Prompt (Admin).

Print Spooler keeps starting back up. This can happen if a printer driver or Windows Update restarts it. Double-check the startup type is Disabled in Services. If it still starts, run sc config spooler start= disabled again and reboot.

You need to print again but can’t remember how to re-enable. Open Services, find Print Spooler, set startup type to Automatic (or Manual), click Start, then Apply. Or run sc config spooler start= auto and net start spooler as admin.

Print jobs from before are still stuck after re-enabling. Stop the spooler, delete the files in C:\Windows\System32\spool\PRINTERS (as admin), then restart the service. This clears the queue permanently.

Frequently Asked Questions

Will disabling the print spooler affect my installed printers? No, your printer drivers and installed printers remain. They just won’t be able to queue or print until the service is re-enabled.

Is it safe to disable the print spooler permanently? Yes, if you never print from this PC. It’s a common security hardening step because the spooler has been a target for exploits. Just remember to re-enable it if you ever need to print.

Can I still use network printers if the spooler is disabled? No. The print spooler handles all printing, including network printers. You won’t be able to send print jobs to any printer.

Does disabling the spooler speed up my PC? It can free up a small amount of memory and CPU, but the effect is usually negligible unless the spooler is misbehaving or stuck.

What is the difference between stopping and disabling? Stopping ends the service now. Disabling prevents it from starting automatically at boot. You need to do both to keep it off permanently.

Will Windows Update re-enable the spooler? In most cases, no. Windows Update doesn’t change service startup types. However, some printer driver installations might attempt to start it, so check the status after installing new drivers.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →