sodcalculator

10 Tech How-To

How to Disable Proximity Sensor on Android

Guide 10-51420 · Updated · Step by step

This guide shows you how to disable the proximity sensor on your Android phone, which is the sensor that turns off your screen during calls to prevent accidental touches. Disabling it can stop the screen from going black when you’re on a call or when the sensor gets blocked by a screen protector. You’ll need an Android phone with developer options enabled (for the built-in method) or a third-party app if your phone doesn’t offer the toggle.

What You’ll Need

  • An Android phone (Android 9 or later recommended for the built-in method)
  • Access to Settings and Developer Options (to enable Developer Options, go to Settings > About Phone and tap “Build Number” 7 times)
  • If your phone doesn’t have the toggle, a third-party app like “Proximity Sensor Reset” or “Sensor Disabler” (these require ADB or root access; see Troubleshooting)

Step-by-Step

  1. Open the Phone app. Tap the Phone icon (the one you use to make calls). This is where the proximity sensor is most active.
  2. Tap the three-dot menu. Look for the vertical or horizontal three dots in the top-right corner of the screen. Tap it to open a dropdown menu.
  3. Select “Settings” or “Call Settings.” The exact wording varies by phone, but it’s usually “Settings” or “Call Settings.” Tap it.
  4. Look for “Proximity Sensor” or “Screen Off During Calls.” Scroll through the settings. You might see a toggle labeled “Proximity Sensor,” “Turn off screen during calls,” or “Auto screen off.” If you find it, turn the toggle off.
  5. If not found, go to Developer Options. Open the main Settings app, scroll down to “System” (or “About Phone”), and tap “Developer Options.” If you haven’t enabled Developer Options, go to Settings > About Phone and tap “Build Number” seven times until a message says “You are now a developer.”
  6. Find “Quick settings developer tiles” or “Sensors Off.” In Developer Options, scroll down to find “Quick settings developer tiles” (or just “Developer tiles”). Tap it and enable “Sensors Off.” This adds a tile to your Quick Settings panel that disables all sensors, including the proximity sensor.
  7. Use the Sensors Off tile. Swipe down from the top of your screen to open the Quick Settings panel (the notification shade). Look for the new tile labeled “Sensors Off” (it might look like a sensor icon). Tap it to enable it. The tile will turn on, and all sensors will be disabled until you turn it off.
  8. If you want a permanent, per-app disable, use a third-party app. Install an app like “Proximity Sensor Reset” or “Sensor Disabler” from the Google Play Store. Open the app and follow its instructions. Many require you to run a command via ADB (Android Debug Bridge) on a computer, or they need root access. The app will guide you through the process.

Common Mistakes

  • Disabling the wrong setting. Some phones have a setting called “Prevent accidental touches” or “Pocket mode” that also uses the proximity sensor. Turning that off won’t disable the sensor itself, but it might fix the screen-blackout issue. Make sure you’re toggling the actual “Proximity Sensor” option.
  • Not restarting the phone. After changing the setting, some phones need a restart for the change to take effect. If the screen still goes black, restart your phone.
  • Using the “Sensors Off” tile permanently. The Sensors Off tile disables all sensors, including the accelerometer (for auto-rotate) and light sensor (for auto-brightness). If you leave it on, your screen won’t rotate and brightness won’t adjust automatically. Turn it off when you don’t need it.
  • Assuming every Android phone has the same settings. Phone manufacturers (Samsung, Xiaomi, OnePlus, etc.) customize Android. The exact menu names and locations vary. If you can’t find the option, search your phone’s Settings for “proximity” or “sensor.”

Tips

  • Test the sensor first. Before disabling, check if the sensor is actually the problem. During a call, cover the top of the screen with your hand. If the screen goes dark, the sensor works. If it doesn’t, the sensor might be faulty, and disabling it won’t help.
  • Clean the sensor. Sometimes dust or a screen protector blocks the sensor, causing the screen to stay off. Wipe the top of the phone with a soft cloth. If you have a screen protector, make sure it has a cutout for the sensor.
  • Use a headset or speakerphone. If you don’t want to disable the sensor, use a Bluetooth headset or speakerphone during calls. The sensor is less likely to trigger when the phone isn’t against your ear.
  • Remember to re-enable the sensor. If you use the Sensors Off tile, remember to turn it off after the call. Leaving it on can drain battery faster because the phone might not enter deep sleep correctly.

Troubleshooting

Screen still goes black during calls. If you’ve disabled the proximity sensor but the screen still turns off, the issue might be a faulty sensor or a software glitch. Try restarting your phone. If that doesn’t work, check if your screen protector is covering the sensor – remove it and test. If the problem persists, consider a factory reset (back up your data first).

Can’t find the toggle in Phone Settings. Some phones (especially older Android versions) don’t have a direct toggle. Use the Developer Options method (Sensors Off tile) or a third-party app. If you use a third-party app, make sure you follow the app’s instructions exactly, as many require ADB commands.

Third-party app says “ADB required” and you don’t know how to use ADB. ADB (Android Debug Bridge) is a command-line tool. You’ll need to install it on your computer, enable USB debugging on your phone, and then run a specific command (usually adb shell settings put system proximity_sensor 0 or similar). The app will provide the exact command. If this seems too technical, consider using the Sensors Off tile instead.

Sensors Off tile doesn’t appear. After enabling it in Developer Options, the tile should appear in Quick Settings. If it doesn’t, swipe down twice to see all tiles, then tap the edit (pencil) icon to add it manually. If it’s still not there, restart your phone.

Phone’s auto-brightness and rotation stopped working. This is expected if you’ve left the Sensors Off tile on. Turn it off to restore normal sensor behavior.

Frequently Asked Questions

Q: Is it safe to disable the proximity sensor?
A: Yes, it’s safe. The sensor is only used to turn off the screen during calls. Disabling it won’t harm your phone, but you might accidentally press buttons with your cheek during calls.

Q: Will disabling the proximity sensor drain my battery?
A: No, disabling it won’t drain battery. In fact, it might save a tiny bit because the sensor isn’t active. However, if you use the “Sensors Off” tile, other sensors are also off, which could affect battery in unexpected ways.

Q: Can I disable the proximity sensor for only one app?
A: Yes, some third-party apps allow per-app sensor control, but they require root access or ADB. Without root, the built-in methods disable it globally.

Q: Why does my screen go black during calls even when I don’t hold it to my ear?
A: This usually happens because the sensor is blocked by something (like a screen protector or a case) or because the sensor is faulty. Try cleaning the sensor area or removing the case.

Q: Will a factory reset re-enable the proximity sensor?
A: Yes, a factory reset restores all default settings, so the sensor will be re-enabled. You’ll need to disable it again if you want it off.

Q: Does disabling the proximity sensor affect the “raise to wake” feature?
A: No, “raise to wake” uses the accelerometer, not the proximity sensor. So that feature will still work unless you also disable other sensors via the “Sensors Off” tile.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →