Secure Boot is a UEFI feature that checks the signature of the operating system loader before allowing it to run. Disabling it is sometimes necessary to boot Linux from a USB drive, install an older operating system, or use certain hardware drivers that aren’t signed. This guide walks you through turning it off in Windows 10, starting from the Settings app and then moving into the UEFI firmware if needed.
What You’ll Need
- A Windows 10 PC with UEFI firmware (most computers from 2012 or later).
- Administrator access to Windows.
- If your PC uses BitLocker drive encryption, have your recovery key handy—disabling Secure Boot may trigger a recovery prompt.
Step-by-Step
- Open Windows Settings. Press Win + I on your keyboard, or click the Start button and then the gear icon.
- Go to Update & Security. In the Settings window, click the “Update & Security” tile.
- Open Recovery. In the left sidebar, select “Recovery”.
- Restart into UEFI. Under “Advanced startup”, click the “Restart now” button. Your PC will reboot and show a blue screen with several options.
- Choose Troubleshoot. On the blue screen, click “Troubleshoot”.
- Select Advanced options. Then click “Advanced options”.
- Click UEFI Firmware Settings. You’ll see a tile labeled “UEFI Firmware Settings”. Click it, then click “Restart”. Your PC will boot into the UEFI/BIOS setup screen.
- Find the Secure Boot setting. The exact location varies by manufacturer. Look for tabs like “Security”, “Boot”, or “Authentication”. On many systems, it’s under “Boot” → “Secure Boot” or “Security” → “Secure Boot”.
- Disable it. Change the setting from “Enabled” to “Disabled”. Use the arrow keys and Enter, or the mouse if supported.
- Save and exit. Press F10 (or select “Save & Exit” from the Exit menu) and confirm that you want to save changes. Your PC will restart normally.
Common Mistakes
- Not saving changes. If you just exit without saving, Secure Boot stays on. Always use “Save & Exit” or press the key shown on screen (often F10).
- Looking in the wrong place. Some systems put Secure Boot under “Advanced” or “Configuration”. If you can’t find it, consult your motherboard or PC manual.
- Confusing UEFI with BIOS. If your PC uses legacy BIOS (not UEFI), you won’t have Secure Boot at all. This is rare on Windows 10 machines.
- Forgetting to re-enable it later. If you disable Secure Boot for a one-time task, remember to turn it back on afterward to keep your system secure.
Tips
- Write down your BitLocker recovery key before disabling Secure Boot. If BitLocker complains, you’ll need it to unlock your drive.
- Take a photo of the UEFI screen with your phone so you remember the original settings.
- If you’re trying to boot Linux, you may not need to disable Secure Boot—many distributions now support it. Try booting first, and only disable if you get a “Security Violation” error.
- Use the search function in UEFI if available (some newer systems have a magnifying glass icon) to jump straight to the Secure Boot setting.
Troubleshooting
I can’t find the “UEFI Firmware Settings” option. This happens if your PC is in legacy BIOS mode. You can switch to UEFI from Windows, but it’s more involved. Alternatively, try pressing a key during startup (like F2, Del, or Esc) to enter the UEFI directly. Check your PC’s manual for the exact key.
After disabling, Windows won’t boot. This is rare, but if it happens, re-enter the UEFI and re-enable Secure Boot. If you still can’t boot, use Windows Recovery (from a USB drive) to repair startup.
BitLocker asks for a recovery key. Enter the 48-digit key you saved earlier. If you don’t have it, you may need to use another method to unlock the drive—this is why the key is essential.
The setting is grayed out. Some systems lock Secure Boot when “CSM” (Compatibility Support Module) is enabled. Disable CSM or “Legacy Boot” first, then try again.
My PC boots to a black screen after changing the setting. Force a shutdown (hold the power button for 10 seconds), then power on and enter the UEFI again. Revert the change and save.
Frequently Asked Questions
Is it safe to disable Secure Boot?
It reduces protection against bootkits, but as long as you’re careful about what you boot, the risk is low. Re-enable it when you’re done.
Will disabling Secure Boot affect Windows updates?
No, Windows updates will still install normally. Secure Boot only checks the boot loader, not the OS itself.
Can I disable Secure Boot without entering the UEFI?
No, it’s a firmware setting. You must access the UEFI/BIOS to change it.
Does disabling Secure Boot void my warranty?
No, it’s a standard user-configurable setting. It won’t void your warranty.
How do I re-enable Secure Boot?
Follow the same steps, but change the setting from “Disabled” to “Enabled”. You may need to restore factory keys first if prompted.
Why is Secure Boot not listed in my UEFI?
Your PC may not support it (older hardware), or it might be hidden. Check if your CPU and motherboard support UEFI Secure Boot, and look for a “Secure Boot” or “Boot Security” section.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- GTM vs Facebook Pixel: What’s the Difference?
- Windows 10 Won’t Boot? Fix It in 30 Minutes
- Ubuntu 26.04 LTS Requirements & Hardware Checks
- How to View Wi-Fi Password on iPhone
- How to Stream on Twitch from PC
- ATK0100 Driver: Do You Need to Install It?