This guide shows you how to turn SMB 1.0/CIFS File Sharing Support on or off in Windows 10, which lets you connect to older devices or improves security by removing outdated protocols. You’ll need administrator access to your PC.
What You’ll Need
- An account with administrator privileges on the Windows 10 PC.
- Knowledge of whether you need SMB 1.0 (for legacy devices like old NAS drives or Windows XP/7 machines) or SMB 2.0/3.0 (default for modern Windows).
Step-by-Step
- Open Control Panel. Press Windows + R, type
control, and press Enter. - Navigate to Programs. Click on Programs, then Turn Windows features on or off. If you don’t see it, switch the view in the top-right from “Category” to “Large icons” or “Small icons”.
- Find SMB 1.0. In the list, scroll down to SMB 1.0/CIFS File Sharing Support. Click the plus sign (+) to expand it.
- Enable or disable.
- To enable: Check the box next to SMB 1.0/CIFS File Sharing Support (this enables the client and server). If you only need the client (to connect to old devices), check only SMB 1.0/CIFS Client. If you need to share files with old devices, also check SMB 1.0/CIFS Server.
- To disable: Uncheck the box next to SMB 1.0/CIFS File Sharing Support.
- Click OK. Windows will apply the change. If you enabled it, you may need to insert your Windows installation media or restart. If you disabled it, a restart is usually required.
- Restart your PC. Click Restart now when prompted. If you don’t see a prompt, restart manually to complete the change.
Common Mistakes
- Enabling SMB 1.0 when you don’t need it. SMB 1.0 is outdated and has known security vulnerabilities (like EternalBlue). Only enable it if you have a specific legacy device that requires it.
- Disabling SMB 1.0 and then wondering why old devices don’t connect. If you have a really old NAS or a Windows XP machine, it may only support SMB 1.0. You’ll need to enable it again or update the device’s firmware.
- Forgetting to restart. The change doesn’t take effect until you restart the PC. Don’t skip the restart and then think the setting didn’t work.
- Using PowerShell commands without admin rights. If you prefer command-line, you must open PowerShell as administrator, or you’ll get an “access denied” error.
Tips
- Check current SMB status quickly. Open PowerShell as administrator and run
Get-SmbServerConfiguration | Select EnableSMB1Protocol, EnableSMB2Protocolto see what’s enabled. - Use SMB 2.0/3.0 when possible. Windows 10 has SMB 2.0 and 3.0 enabled by default. These are faster and more secure. Only touch SMB 1.0 if you truly need it.
- If you enable SMB 1.0, consider disabling it after you’re done. For example, if you’re just migrating files from an old PC, enable SMB 1.0, transfer the files, then disable it again.
- For advanced users, use PowerShell. To enable SMB 1.0:
Set-SmbServerConfiguration -EnableSMB1Protocol $true(run as admin). To disable:Set-SmbServerConfiguration -EnableSMB1Protocol $false. You’ll need to confirm withY.
Troubleshooting
- “Windows cannot complete the requested operation” error. This often happens if you’re trying to enable SMB 1.0 and Windows can’t find the necessary files. Try running
DISM /Online /Cleanup-Image /RestoreHealthin an elevated command prompt, then try again. - Old device still can’t connect after enabling SMB 1.0. Make sure you’ve enabled both the client and server components (check both boxes). Also, check that the old device is on the same network and that SMB 1.0 is supported on that device. Some devices need a firmware update.
- After disabling SMB 1.0, you get an error when accessing network shares. This is expected if the share is hosted on a device that only supports SMB 1.0. You’ll need to either enable SMB 1.0 again or update the hosting device’s software.
- Changes don’t seem to apply. Make sure you restart the PC. Also, verify the setting in the “Turn Windows features on or off” dialog – sometimes the checkbox appears checked but the change wasn’t fully applied. Uncheck, restart, then re-check if needed.
- PowerShell command fails with “Access Denied”. Right-click on PowerShell and select “Run as administrator”. The command must be run in an elevated session.
Frequently Asked Questions
What is SMB 1.0 and why is it disabled by default?
SMB 1.0 is the original version of the Server Message Block protocol, dating back to the 1980s. It’s insecure and vulnerable to ransomware attacks like WannaCry. Microsoft disables it by default on Windows 10 to protect users.
How do I know if SMB 1.0 is enabled on my PC?
Open PowerShell as admin and run Get-WindowsOptionalFeature -Online -FeatureName SMB1Protocol. If the State is “Enabled”, it’s on. Or check the “Turn Windows features on or off” dialog.
Can I enable SMB 1.0 without restarting?
No, a restart is required for the change to take effect. Windows will prompt you to restart after you click OK.
Is SMB 2.0/3.0 the same as SMB 1.0?
No. SMB 2.0 and 3.0 are newer, faster, and more secure versions. Windows 10 uses SMB 3.0 by default. You don’t need to enable them – they’re always on.
Will disabling SMB 1.0 break my network printer or scanner?
Possibly, if the printer or scanner is old and only supports SMB 1.0 for file sharing. Most modern devices support SMB 2.0/3.0. Check the device’s documentation for SMB support.
Can I enable SMB 1.0 using Group Policy?
Yes, but it’s more complex. You can use the Group Policy Editor to set “Configure SMB 1.0” under Computer Configuration > Administrative Templates > Network > Lanman Server. However, the Windows Features method is simpler for most users.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Fix Text Cursor Turning White in Windows 11
- Force Quit Non-Responding Apps on Mac: 6 Ways
- Chromebook Not Charging? Fix It Fast
- iPhone Won’t Make Calls but Texts Work? Fixes
- Android to iPhone Hotspot: Connect & Fix Issues
- Fix Bluetooth Not Working on Discord Mobile