sodcalculator

10 Tech How-To

Identify Window Manufacturer: Step-by-Step Guide

Guide 10-48665 · Updated · Step by step

This guide helps you find out which company manufactured the windows in your home, whether you need replacement parts, want to match existing windows, or are researching for a renovation. You will learn where to look for labels, how to decode common markings, and what to do when the manufacturer is not obvious. No special tools are required, though a flashlight and a phone camera will make the search easier.

What You’ll Need

  • Flashlight (for dark corners and tight spaces)
  • Phone camera or digital camera (to photograph labels without needing to read them on the spot)
  • Step ladder (for tall windows or transoms)
  • Soft cloth or paper towel (to wipe away dust and grime from labels)
  • Magnifying glass or reading glasses (for small etched text)
  • Notepad and pen (to record codes and numbers)

Step-by-Step

  1. Start with the visible corners. Look at the bottom corners of the window frame from inside your home. Many manufacturers place a sticker or a printed label on the top or bottom edge of the sash (the moving part) or on the fixed frame. Check both the upper and lower sash, and also the side jambs (the vertical parts of the frame).
  2. Open the window and inspect the jamb tracks. Slide the window open and shine your flashlight along the tracks where the sash slides. Labels are often placed on the jamb liner or on the side of the sash that faces the track. These labels can be small and may be partially hidden by the window hardware.
  3. Check the top of the upper sash. If you have double-hung or single-hung windows, look at the top edge of the upper sash. You may need a ladder to see it clearly. Manufacturers sometimes place a barcode sticker or a foil label here.
  4. Look at the glass itself. In the corner of the glass pane, look for a small etched or printed code. This is often the glass manufacturer’s logo or a tempering mark, but it can also include the window company’s name. The code is usually in the corner and may be very small. Use your magnifying glass if needed.
  5. Inspect the spacer bar between glass panes. For double-pane windows, look at the metal or foam spacer that runs along the edge of the glass inside the sealed unit. Some manufacturers print their name or a date code on this spacer. You may need to clean the glass and use the flashlight at an angle to see it.
  6. Check the hardware. Remove the window lock or handle (usually held by two small screws) and look for a brand name or logo stamped on the back. While this identifies the hardware maker, not the window maker, it can be a clue. Many window companies use hardware from specific brands, and a hardware brand can narrow down your search.
  7. Look on the exterior frame. Go outside and inspect the outer frame, especially the top and bottom edges. Weather and sun may have faded the label, but a sticker or a stamped name can often still be found. Check the underside of the sill and the head (top) of the frame.
  8. Check the attic and basement. If you have unfinished attic or basement spaces, look at the windows from the rough opening. The manufacturer’s label is sometimes placed on the side of the frame that faces the wall cavity. This is more common in new construction than in retrofits.
  9. Search for a date code. Once you find any label, look for a combination of letters and numbers. This is often a date code (e.g., “0315” could mean March 2015) and a plant code. Write all of it down, even if it seems meaningless.
  10. Use the numbers online. Take a clear photo of the label or code. Search the web for the exact text, including any brand name and the code. If you find a brand name, visit the manufacturer’s website and look for a “Contact” or “Parts” page where you can submit your photo and code.
  11. Ask a local window dealer. Bring your photos to a local window and door supply store. An experienced dealer can often identify the manufacturer from the profile of the frame or the style of the hardware, even without a label.
  12. Measure the window. If you cannot find any label, measure the window’s width, height, and depth. Also note whether the window is a slider, casement, awning, or double-hung. This information, along with the age of your home, can help a professional narrow down the options.

Common Mistakes

  • Only checking one window. Labels may be missing on some windows but present on others. Check every window in the house, especially in less-used rooms.
  • Confusing the glass manufacturer with the window manufacturer. The etched code on the glass is often the glass company (like a major glass brand), not the company that built the frame. Do not stop at the glass code.
  • Ignoring faded or dirty labels. A label that looks blank may have text visible when wiped with a damp cloth and viewed at an angle with a flashlight.
  • Assuming the hardware brand is the window brand. A lock stamped with a hardware brand does not mean that brand made the window. Use it as a clue, not a conclusion.
  • Forgetting to check the exterior. Many people only search inside. The exterior frame, especially under the sill, often has a label that has survived because it is protected from direct sun.
  • Not photographing the label. If you find a label but do not record it, you may lose it later. Always take a photo before doing anything else.

Tips

  • Use a bright light at an angle. Labels that are embossed or etched are much easier to read when light hits them from the side. Shine your flashlight parallel to the surface.
  • Clean the area first. A quick wipe with a damp cloth can reveal text that was hidden under a layer of dust or grease.
  • Check the window screen. The screen frame sometimes has a sticker with the window manufacturer’s name, even if the window itself does not.
  • Look at the weatherstripping. Some manufacturers print their name on the weatherstripping material.
  • Check the installation paperwork. If you have the original building plans, permits, or receipts from when the house was built or renovated, the window brand is often listed.
  • Ask your neighbors. If you live in a development or a neighborhood built around the same time, your neighbors may have the same windows and may already know the brand.

Troubleshooting

  • No label found anywhere: If you have checked all windows and found nothing, the label may have been removed by a previous owner or worn away by the sun. In this case, measure the window and take clear photos of the frame profile from inside and outside. Contact a local window dealer and ask if they can identify the brand from the profile. Many brands have distinctive frame shapes.
  • Label is unreadable: Try photographing it with your phone’s flash, then zoom in on the photo. Sometimes the contrast on a screen is better than what you see with your eyes. You can also try rubbing a soft pencil over a piece of paper placed over an embossed label to make a rubbing.
  • Found a code but cannot decode it: Post the code and a photo of the label on a window installation or home improvement forum. Experienced installers often recognize manufacturer codes. Do not include your address or personal information.
  • Glass code only: If you only find the glass manufacturer’s code, search for that glass brand plus the word “window” to see which window companies use that glass in your area. This is not definitive, but it can narrow the list.
  • Window is very old: Older windows (pre-1980s) may have no label at all. Check the wood or metal frame for a stamped logo or a paper tag that may be tucked into the frame. If nothing is found, you may need to accept that the brand is unknown and focus on matching the style and dimensions for replacement.
  • Hardware brand leads nowhere: If the hardware is a generic brand used by many window companies, search the hardware brand plus “replacement window” to see which manufacturers commonly pair with that hardware. This is a weak clue but can be combined with the age of the house and the window style.

Frequently Asked Questions

Q: Is the manufacturer always marked on the window?
No. Many budget or custom windows have no visible label, and labels on older windows often fade or peel off. You may need to rely on other clues like frame profile and hardware.

Q: What does the number on the glass corner mean?
That is usually a glass certification or tempering mark, not the window brand. It tells you the glass type and safety rating, not who built the frame.

Q: Can I find the manufacturer from the window style alone?
Sometimes. A knowledgeable window dealer can often identify the brand by the shape of the frame, the type of weatherstripping, and the hardware style. This is not guaranteed, but it is worth asking.

Q: Are replacement parts available if I do not know the brand?
Yes. Many hardware parts (locks, balances, handles) are standard sizes and can be purchased from hardware stores or online without knowing the window brand. For custom parts, you may need to measure and match the profile.

Q: What if the window was made by a company that went out of business?
This is common. If the company no longer exists, you can still find replacement parts from third-party suppliers that stock generic parts. For the glass unit itself, any local glass shop can build a new sealed unit to your measurements.

Q: Do I need to remove the window to find the label?
Usually not. Labels are almost always visible without removing the sash. If you cannot find one, removing the window is unlikely to help because the label is normally on the surface, not hidden inside the wall.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →