If your AirPods 5 are refusing to connect, charge, or play audio, it can feel like you’re locked out of your music and calls. This guide walks you through the most common causes and fixes, from simple resets to cleaning contact points, so you can get your earbuds working again without a trip to the store.
What You’ll Need
- Your AirPods 5 and their charging case
- The device you normally pair them with (iPhone, iPad, Mac, or Android)
- A clean, soft, dry, lint-free cloth (microfiber works best)
- A cotton swab (optional, for deeper cleaning)
- A USB charging cable and power source (or a wireless charger if your case supports it)
Step-by-Step
- Check the basics. Make sure your AirPods 5 have battery charge. Place both earbuds in the charging case, close the lid, and wait at least 30 seconds. Open the lid near your paired device and check the battery status pop-up (iOS) or the Bluetooth settings (Android/Windows). If the case shows no charge at all, plug it in with a cable or place it on a wireless charger for at least 15 minutes.
- Clean the charging contacts. Over time, dirt and earwax can block the charging pins on the earbuds and the case. Use a dry cotton swab or a soft cloth to gently wipe the metal contacts at the base of each earbud stem and the corresponding pins inside the case. Do not use liquids or sharp objects. This is a very common cause of charging failures.
- Force restart your AirPods. Put both earbuds in the case, close the lid, and wait 30 seconds. Open the lid, then press and hold the setup button on the back of the case for about 15 seconds. The status light should flash amber, then white. Release the button. This resets the connection and often fixes pairing and audio issues.
- Re-pair with your device. After the reset, with the lid open and the AirPods near your device, follow the on-screen pairing prompt (iOS) or go to Bluetooth settings and select “AirPods” to pair manually. If they don’t appear, try forgetting the device first: On iOS, go to Settings > Bluetooth, tap the “i” next to your AirPods, and choose “Forget This Device.” Then repeat the pairing process.
- Check audio output settings. Sometimes the AirPods are connected but audio still plays from the phone speaker. On iOS, open Control Center, tap the AirPlay icon (a triangle with circles), and select your AirPods. On Android or Windows, go to the sound output settings and choose “AirPods” as the default output device.
- Update firmware (if possible). AirPods update automatically when connected to an iOS device and charging. Ensure your iPhone is up to date, then keep your AirPods in the case, connected via Bluetooth, and plugged into power for about 30 minutes. This can resolve bugs that cause connection or audio glitches.
- Reset network settings (iOS only). If the AirPods still won’t connect, go to Settings > General > Transfer or Reset iPhone > Reset > Reset Network Settings. This won’t delete your data but will clear saved Wi-Fi and Bluetooth connections. You’ll need to re-enter Wi-Fi passwords. Then try pairing your AirPods again.
- Test with another device. Try pairing your AirPods with a different phone or computer. If they work there, the problem is with your original device. If they don’t work anywhere, the issue is likely with the AirPods themselves.
Common Mistakes
- Skipping the cleaning step. Many people assume the battery is dead when the real issue is just dirty contacts. Always clean before assuming hardware failure.
- Holding the setup button too briefly. The reset requires a continuous 15-second press. Releasing early won’t trigger the reset.
- Ignoring the case battery. The case itself can be dead even if the earbuds have charge, and vice versa. Always check both.
- Forgetting to forget. Simply re-pairing without “Forget This Device” on iOS can leave old settings that block a fresh connection.
- Using liquids to clean. Moisture can damage the charging contacts. Always use dry materials.
Tips
- Keep your AirPods and case clean on a regular basis—wipe them down weekly with a dry cloth.
- Store your AirPods in the case when not in use to protect them and keep them charged.
- If you use a wireless charger, ensure the case is properly centered on the charging pad.
- Turn off Bluetooth on your device for a few seconds, then turn it back on before re-pairing—this can clear minor glitches.
- If your AirPods are under warranty, contact Apple Support before attempting any disassembly or repair.
Troubleshooting
If the steps above haven’t worked, try these additional checks:
- Case not charging at all: Try a different cable, power adapter, and outlet. If using wireless charging, check that the pad is working with another device. If the case still won’t charge, the battery may be depleted or the charging circuitry may be faulty.
- One AirPod not working: Place both earbuds in the case, close the lid, and wait 10 seconds. Then remove only the problematic one and see if it connects. If not, clean its contacts and try again. If it still fails, the earbud may have a hardware issue.
- Audio cuts out intermittently: This is often due to interference. Move away from Wi-Fi routers, microwaves, or other Bluetooth devices. Also, ensure your device’s Bluetooth is not connected to multiple audio devices simultaneously.
- Status light not showing: The status light on the front of the case indicates charging and pairing status. If it’s not lighting up at all, the case may be completely dead—charge it for at least 30 minutes. If it still doesn’t light, the case battery may be faulty.
- AirPods not appearing in Bluetooth list: After a reset, they should appear as “AirPods” in pairing mode. If not, try resetting again, ensuring the lid is open and the earbuds are inside.
Frequently Asked Questions
Why won’t my AirPods 5 charge even when they’re in the case?
Most often, this is due to dirty charging contacts. Clean the metal contacts on the earbuds and inside the case with a dry cotton swab. Also check that the case itself has battery—plug it in for at least 15 minutes.
How do I reset my AirPods 5?
Place both earbuds in the case, close the lid, wait 30 seconds, then open the lid and press and hold the setup button on the back of the case for about 15 seconds until the status light flashes amber, then white.
My AirPods connect but there’s no sound. What should I do?
Check the audio output on your device—make sure AirPods are selected as the output, not the phone speaker. Also try disconnecting and reconnecting Bluetooth, and ensure the volume is up on both the device and the AirPods (if they have volume controls).
Can I use my AirPods 5 with an Android phone?
Yes, they work as standard Bluetooth earbuds. Pair them via the Bluetooth settings on your Android device. You won’t get automatic ear detection or Siri, but audio playback and mic should work.
Why does only one AirPod work?
This is often a connection issue. Put both earbuds in the case, close the lid, wait 10 seconds, then take out the non-working one. If it still doesn’t work, clean its contacts and try again. If it still fails, the earbud may need service.
How long should I charge my AirPods case for the first time?
There’s no need for a special first charge. Just charge until the status light turns green or the battery indicator shows full. Typically, 15-30 minutes gives enough charge for a few hours of use.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Hogwarts Legacy Microsoft Visual C Runtime Error Fix
- Set Up UPI Payments Through WhatsApp
- Pair Oppo Enco Earbuds with Android, iPhone & Windows
- Fix Administrator Account Disabled Error in Windows 11
- How to Play Kodi on Smart TV from PC
- How to Change Password in Linux (Command Line)