sodcalculator

10 Tech How-To

How to Fix Disk Not Initialized on Windows 10

Guide 10-48675 · Updated · Step by step

When Windows 10 reports that a disk is “Not Initialized,” it means the drive has no valid disk signature or partition table, so the operating system cannot access it. This guide walks you through the steps to initialize the disk using Disk Management or DiskPart, which will prepare it for partitioning and formatting. Before starting, ensure you have backed up any important data (if the disk previously worked) and that you know the exact disk number you want to fix.

What You’ll Need

  • Administrative access to Windows 10 (you’ll need to approve UAC prompts).
  • Backup of any data on the disk if it was previously accessible—initializing erases all data.
  • If the disk is external, a USB port and a stable connection (try a different cable or port if needed).
  • If the disk is internal, a free SATA/power cable and a screwdriver if you need to reseat it.

Step-by-Step

  1. Open Disk Management: Right-click the Start button and select “Disk Management.” If prompted by User Account Control, click “Yes.”
  2. Identify the uninitialized disk: Look for a disk that says “Unknown” and “Not Initialized” in its status. Note the disk number (e.g., Disk 1).
  3. Initialize the disk: Right-click the disk label (the box that says “Disk 1”) and select “Initialize Disk.”
  4. Choose partition style: In the dialog, select the disk (it should be checked) and choose either MBR (Master Boot Record) or GPT (GUID Partition Table). For disks larger than 2 TB or on UEFI systems, choose GPT. For older systems or compatibility with 32-bit Windows, MBR may be required. Click OK.
  5. Wait for initialization: The disk status should change to “Online” and “Basic” after a few seconds. If it stays “Not Initialized,” proceed to the DiskPart method below.
  6. Create a volume (optional but recommended): Right-click the unallocated space on the disk and select “New Simple Volume.” Follow the wizard: specify size, assign a drive letter, choose a file system (NTFS for Windows), and finish.
  7. If Disk Management fails, use DiskPart: Open Command Prompt as administrator (type “cmd” in Start, right-click, “Run as administrator”).
  8. Launch DiskPart: Type diskpart and press Enter.
  9. List disks: Type list disk and press Enter. Identify the disk number of the uninitialized disk (e.g., 1).
  10. Select the disk: Type select disk 1 (replace 1 with the correct number) and press Enter.
  11. Clean the disk (erases all data): Type clean and press Enter. This removes any existing partition table.
  12. Convert to GPT or MBR: Type convert gpt (or convert mbr) and press Enter.
  13. Exit DiskPart: Type exit and press Enter, then close the Command Prompt.
  14. Return to Disk Management: Right-click Start > Disk Management. The disk should now show as “Online” and “Unallocated.” Right-click the unallocated space and create a new volume as described in step 6.

Common Mistakes

  • Initializing the wrong disk: Double-check the disk number. Initializing the wrong disk will erase all data on it.
  • Choosing MBR when GPT is needed: For disks larger than 2 TB, MBR will only show 2 TB of space. Use GPT for large drives.
  • Not cleaning before converting: If the disk has leftover partition structures, DiskPart may fail. Always run clean before converting.
  • Forgetting to create a volume: After initialization, the disk is still unusable until you create a partition and format it.
  • Using the wrong diskpart command: Typing select disk 0 by accident will target your system drive—be careful.

Tips

  • Always back up data before attempting any disk repair, even if the disk seems empty.
  • If the disk is a brand-new external drive, it may come uninitialized—this is normal.
  • Use GPT if your motherboard supports UEFI (most modern PCs do). It is more robust and supports larger disks.
  • If you’re unsure which partition style to use, check if your BIOS is UEFI or Legacy. GPT works with UEFI; MBR works with both but is older.
  • After initializing, you can also use the disk for storage without creating a volume, but it won’t show up in File Explorer until you format it.

Troubleshooting

If the disk still shows “Not Initialized” after following the steps, try these in order:

  • Check connections: Reseat the SATA/power cables (for internal drives) or try a different USB port/cable (for external drives). Sometimes a loose connection causes the disk to appear uninitialized.
  • Update drivers: Open Device Manager, expand “Disk drives,” right-click the disk, and select “Update driver.” Then search automatically for updated driver software.
  • Run CHKDSK: Open Command Prompt as administrator and type chkdsk X: (replace X with the drive letter if it has one). If the disk has no letter, skip this.
  • Check disk health: Use a tool like CrystalDiskInfo (free) to see if the disk is failing. If SMART status is bad, the disk may be physically damaged.
  • Try another computer: Connect the disk to a different PC. If it works there, the issue may be with your system’s disk controller.
  • Use DiskPart’s “attributes disk clear readonly”: If the disk is write-protected, type attributes disk clear readonly after selecting the disk in DiskPart.
  • If all else fails: The disk may be dead. If it’s under warranty, contact the manufacturer. If not, you may need to replace it.

Frequently Asked Questions

Will initializing a disk erase my data?

Yes, initializing a disk erases all data on it. If you have important files, try data recovery software before initializing.

What is the difference between MBR and GPT?

MBR is the older partition table, limiting disks to 2 TB and 4 primary partitions. GPT is newer, supports disks larger than 2 TB and up to 128 partitions, and is required for UEFI boot.

Can I initialize a disk without losing data?

No, initialization rebuilds the partition table, which destroys existing data. However, if the disk shows as “Not Initialized” due to a corrupted partition table, data recovery software might be able to recover files before you initialize.

Why does my external hard drive show “Not Initialized”?

This can happen if the drive was formatted on a Mac or Linux, or if the partition table is corrupted. It can also occur if the drive is new and hasn’t been set up yet.

What should I do if Disk Management says “The specified disk is not convertible”?

This error often appears when the disk has partitions. Use DiskPart to clean the disk first, then convert. Also, ensure the disk is not the system disk.

Can I use a disk that is “Not Initialized” without initializing it?

No, Windows cannot access the disk until it has a valid signature. You must initialize it to use it.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →