If your Fire TV Stick remote’s volume and power buttons have stopped working, you’re not alone. This issue usually stems from a lost IR profile, a drained battery, or a temporary software glitch. This guide walks you through the most effective fixes, from simple resets to reprogramming the remote, so you can regain control of your TV’s volume and power in minutes.
What You’ll Need
- Your Fire TV Stick remote
- Two AAA batteries (or the batteries currently in the remote)
- Access to your Fire TV Stick’s on-screen settings (via the remote’s navigation buttons, or the Fire TV app on your phone)
- Your TV’s original remote (optional but helpful for testing)
- A paperclip or similar tool (only if you need to reset the remote)
Step-by-Step
- Check the basics. First, ensure the batteries in your remote aren’t dead or loose. Replace them with fresh ones if needed. Also, make sure you’re pointing the remote directly at your TV or soundbar when pressing volume or power, as these use IR (infrared) signals that require line-of-sight.
- Restart your Fire TV Stick. Unplug the Fire TV Stick from your TV’s HDMI port or power outlet, wait 30 seconds, then plug it back in. This clears temporary software glitches that can affect remote functionality.
- Restart the remote. Remove the batteries from the remote, press and hold the Menu button (the one with three horizontal lines) for 20 seconds, then reinsert the batteries. This drains residual power and often fixes unresponsive buttons.
- Re-pair the remote. If the remote is still not responding at all, you may need to re-pair it. Hold the Home button for 10 seconds. If the remote doesn’t automatically pair, go to Settings > Controllers & Bluetooth Devices > Amazon Fire TV Remotes and select Add New Remote. Follow the on-screen instructions.
- Reprogram the volume and power buttons. If the remote works for navigation but not volume/power, the IR profile may be wrong. Go to Settings > Equipment Control > Manage Equipment > TV. Select Change TV and follow the prompts to re-scan for your TV brand. Also, check Advanced Settings to ensure the correct IR profile is selected. For soundbars, go to Equipment Control > Manage Equipment > Soundbar and repeat the process.
- Use the Fire TV app as a temporary remote. While troubleshooting, you can download the Amazon Fire TV app on your smartphone. Connect it to the same Wi-Fi network as your Fire TV Stick, and you’ll have a virtual remote that includes volume and power controls.
- Reset the remote to factory defaults. If all else fails, reset the remote by pressing and holding the Back button and the Menu button simultaneously for 15 seconds. After the remote’s LED blinks, re-pair it by holding the Home button for 10 seconds.
Common Mistakes
- Pointing the remote wrong: Volume and power buttons use IR, which requires a direct line of sight to the TV’s IR sensor. Avoid covering the remote’s front end and ensure nothing is blocking the TV’s sensor.
- Ignoring battery polarity: Inserting batteries incorrectly is a frequent oversight. Double-check the + and – symbols inside the battery compartment.
- Skipping the restart: Many users jump straight to reprogramming, but a simple restart of both the remote and the Fire TV Stick resolves a surprising number of issues.
- Using the wrong IR profile: If you recently changed your TV or soundbar, the old profile may still be stored. Always re-run the equipment setup after changing hardware.
- Assuming the remote is broken: Before buying a new remote, test the volume and power buttons with the Fire TV app. If they work there, the problem is definitely with the remote or its IR setup.
Tips
- Keep the remote’s IR blaster clean: Dust or dirt on the front of the remote can block the IR signal. Wipe it gently with a dry cloth.
- Use the remote’s learning feature: Some Fire TV remotes can learn IR commands from your original TV remote. In Settings > Equipment Control > Manage Equipment, look for an option to Learn IR commands and follow the prompts.
- Check for interference: Other IR devices (like a soundbar or cable box) can sometimes interfere. Try moving them away from the TV’s IR sensor.
- Update your Fire TV Stick: Ensure your device has the latest software. Go to Settings > My Fire TV > About > Check for Updates.
- Use CEC as a fallback: If IR is persistently problematic, enable HDMI CEC (Consumer Electronics Control) on your TV and Fire TV Stick. This allows volume and power to be controlled over HDMI. On your TV, look for a setting called HDMI-CEC or Anynet+ (Samsung), Bravia Sync (Sony), or Simplink (LG). On the Fire TV Stick, go to Settings > Display & Sounds > Enable HDMI CEC.
Troubleshooting
If the steps above haven’t restored volume and power control, try these additional checks:
- Test the remote’s IR output: Use your phone’s camera. Open the camera app, point the remote’s front at the lens, and press a button. If you see a faint purple/red light on the screen, the remote is emitting IR. If not, the remote’s IR blaster may be defective.
- Check the TV’s IR sensor: Make sure the sensor isn’t blocked by a sticker, dust, or an object. Some TVs have the sensor in a corner or behind a translucent panel.
- Try a different TV or soundbar: If you have another TV, try programming the remote to control it. If it works there, the issue is with your original TV’s IR receiver, not the remote.
- Factory reset the Fire TV Stick: As a last resort, you can reset the Fire TV Stick to factory defaults. Go to Settings > My Fire TV > Reset to Factory Defaults. This will erase all your apps and settings, so only do this if you’re comfortable setting up the device again.
- Contact Amazon support: If the remote is still under warranty and none of the fixes work, it may be defective. Amazon customer service can help you get a replacement.
Frequently Asked Questions
Why do the volume and power buttons only work sometimes?
This is often due to the IR signal being interrupted. Make sure there’s a clear line of sight between the remote and your TV’s IR sensor. Also, check that the batteries aren’t low, as weak batteries can reduce IR strength.
Can I use the Fire TV app to control volume and power?
Yes, the Fire TV app includes a virtual remote with volume and power buttons. It works over Wi-Fi, so it doesn’t require line-of-sight. This is a great temporary solution while troubleshooting.
Will a new remote fix the problem?
Not necessarily. If the issue is with the TV’s IR sensor or the Fire TV Stick’s software, a new remote won’t help. Try the troubleshooting steps first, especially the equipment control reprogramming, before buying a replacement.
How do I know if my remote is using IR or Bluetooth?
On Fire TV Sticks, the volume and power buttons always use IR. The navigation and select buttons use Bluetooth. That’s why volume/power require line-of-sight, while the rest of the remote works without it.
Can I program the remote to control my soundbar?
Yes. Go to Settings > Equipment Control > Manage Equipment > Add Equipment, select Soundbar, and follow the prompts to choose your brand and test the commands.
Why did my remote stop working after a Fire TV update?
Software updates can sometimes reset settings or introduce bugs. Restarting the remote and re-pairing it usually resolves this. If not, check for another update or perform a factory reset of the remote as described above.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Hard Drive Very Slow Suddenly? Fixes That Work
- Windows Insider: Check New Windows 10 Features
- Restore Pitted Chrome Sink Drain Surrounds
- Error Performing Query Error Facebook: Fixes
- WiFi Not Working on HTC 10? Solved
- Fix Windows 100% CPU Usage: 7 Real Fixes