If your touchpad, touchscreen, or other HID device stops responding after a Windows 11 update, the culprit is often a faulty or outdated I2C HID device driver. This guide walks you through the most effective fixes, from reinstalling the driver to adjusting power settings, so you can get your input device working again without a full system restore.
What You’ll Need
- Administrator access to your Windows 11 PC
- An external mouse or keyboard (in case the touchpad/touchscreen is the only input)
- Optional: a USB drive with the latest driver from your device manufacturer
Step-by-Step
- Restart your PC. A simple reboot can clear temporary glitches that prevent the I2C HID driver from loading correctly. Save your work and restart.
- Run the Hardware and Devices troubleshooter. Open Settings (Win + I) → System → Troubleshoot → Other troubleshooters. Click “Run” next to “Hardware and Devices.” Follow the prompts and restart if it suggests fixes.
- Check Device Manager for errors. Right-click the Start button and select “Device Manager.” Expand “Human Interface Devices.” Look for “I2C HID Device” or a similar entry with a yellow exclamation mark. If present, note the error code (e.g., Code 10, Code 43).
- Reinstall the I2C HID driver. Right-click the I2C HID Device entry and select “Uninstall device.” Check “Delete the driver software for this device” if the option appears, then click “Uninstall.” Restart your PC. Windows will automatically reinstall the driver on boot.
- Update the driver manually. If the automatic reinstall doesn’t work, right-click the device again and select “Update driver” → “Browse my computer for drivers” → “Let me pick from a list of available drivers on my computer.” Choose the latest version (or “Standard” if multiple) and click “Next.” Restart.
- Roll back the driver. If the problem started after a recent driver update, go to the device’s Properties → Driver tab → “Roll Back Driver.” If the button is grayed out, skip to the next step.
- Disable fast startup. Fast Startup can cause drivers to load incorrectly. Open Control Panel → Power Options → “Choose what the power buttons do” → “Change settings that are currently unavailable.” Uncheck “Turn on fast startup (recommended)” and click “Save changes.” Restart.
- Adjust power management settings. In Device Manager, right-click the I2C HID Device → Properties → Power Management tab. Uncheck “Allow the computer to turn off this device to save power.” Click OK and restart.
- Run Windows Update. Go to Settings → Windows Update and click “Check for updates.” Install any pending updates, especially driver updates, and restart.
- Install the chipset driver. I2C devices rely on the Intel or AMD chipset driver. Visit your PC manufacturer’s support site, download the latest chipset driver for your model, and install it. Restart afterward.
- Use System Restore. If nothing else works, restore your PC to a point before the issue began. Search for “Create a restore point” in the Start menu, click “System Restore,” choose a restore point, and follow the prompts.
Common Mistakes
- Uninstalling the driver without restarting: Windows needs a reboot to reinstall the driver. Skipping the restart leaves the device without a driver.
- Downloading drivers from unofficial sites: Always use the manufacturer’s website or Windows Update. Third-party sites may bundle malware or provide incompatible drivers.
- Ignoring BIOS/UEFI updates: An outdated BIOS can cause I2C communication errors. Check your manufacturer’s site for BIOS updates, but only install if you’re comfortable.
- Disabling the device in BIOS: Some users accidentally disable the I2C controller in BIOS. Verify that the I2C or SMBus controller is enabled in your BIOS settings.
Tips
- Use the external mouse/keyboard: Keep a USB mouse or keyboard handy while troubleshooting so you can navigate if the touchpad/touchscreen is unresponsive.
- Create a restore point before making changes: This gives you a safe fallback if a driver update causes more issues.
- Check for Windows feature updates: Sometimes a feature update (like 23H2) includes fixes for I2C driver issues. Install them when available.
- Keep your system clean: Use Disk Cleanup to remove temporary files that might interfere with driver installation.
Troubleshooting
If the steps above don’t resolve the issue, try the following:
- Check the Event Viewer: Open Event Viewer (Win + X → Event Viewer) and look for errors under “Windows Logs → System” with source “i2c” or “HID.” The error details may point to a specific cause (e.g., device timeout).
- Test in Safe Mode: Boot into Safe Mode (Settings → System → Recovery → Advanced startup → Restart now → Troubleshoot → Advanced options → Startup Settings → Restart → press 4). If the device works in Safe Mode, a third-party driver or service is interfering. Use “msconfig” to disable non-Microsoft services and find the culprit.
- Check for hardware issues: If the device doesn’t appear in Device Manager at all, the hardware may be faulty or disconnected. For internal devices, this usually requires professional repair.
- Try a different USB port (for external I2C adapters): Some external I2C devices use USB; try another port to rule out a port issue.
- Use the manufacturer’s diagnostic tool: Many laptop makers provide a hardware diagnostic tool (e.g., HP PC Hardware Diagnostics, Dell SupportAssist). Run it to test the touchpad or touchscreen.
Frequently Asked Questions
Why does my I2C HID device show a yellow exclamation mark?
This indicates a driver problem. The device is recognized but Windows cannot start it properly. Follow the reinstall and update steps above.
Can I use a generic driver instead of the manufacturer’s?
Yes, Windows includes a generic HID driver. In the “Update driver” wizard, choose “Let me pick from a list” and select “HID-compliant touch pad” or similar. It may lack advanced features but should restore basic functionality.
Will resetting Windows fix the issue?
A full reset can fix driver corruption, but it’s a last resort. Try all other steps first, and back up your data before resetting.
Why does the problem return after every Windows update?
Windows updates may overwrite the driver with a buggy version. After fixing the issue, you can hide the problematic update using the “Show or hide updates” troubleshooter from Microsoft.
Is this issue specific to certain laptop brands?
It’s more common on laptops with I2C-connected touchpads, especially from Dell, HP, Lenovo, and ASUS, but it can happen on any device.
How do I know if my touchpad uses I2C?
Open Device Manager and expand “Human Interface Devices.” If you see “I2C HID Device,” your touchpad is I2C-connected. You can also check the hardware ID in the device’s Properties → Details tab.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- MacBook Charger Not Working? Fix It Now
- Fix Windows Cannot Be Installed to This Disk
- Zoom on iPhone & iPad: Host or Join a Meeting
- Fix iPhone SE 4 Unable to Activate: Step-by-Step
- Keep Important Emails From Getting Buried in iPhone Mail Categories
- How to Clear RAM on iPhone: Speed It Up