If your Corsair Void headset’s microphone has stopped working on Windows, this guide walks you through the most common fixes—from checking physical connections to adjusting Windows privacy settings and updating drivers. You’ll get clear, step-by-step instructions that resolve the issue in most cases without needing advanced technical skills.
What You’ll Need
- Your Corsair Void headset (wired or wireless) and its USB receiver or cable
- A Windows PC with an available USB port
- Administrator access to install drivers and change system settings
- Optional: iCUE software (Corsair’s companion app) if you want to update firmware or adjust mic settings
Step-by-Step
- Check the physical connection. For wired Void headsets, ensure the USB connector is fully plugged into your PC. For wireless models, make sure the USB receiver is plugged in and the headset is powered on. Try a different USB port (preferably directly on the motherboard, not a hub) to rule out port issues.
- Confirm the mic is not muted. Look for a physical mute button on the headset (usually on the left earcup). Also, in Windows, click the speaker icon in the system tray, then the up arrow to see if the microphone is muted in the volume mixer.
- Set the Corsair Void as the default input device. Right-click the speaker icon in the system tray and select “Sounds.” Go to the “Recording” tab. If you see “Corsair Void” (or similar), right-click it and choose “Set as Default Device.” If you don’t see it, right-click anywhere in the list and check “Show Disabled Devices” and “Show Disconnected Devices.” If it appears grayed out, right-click and enable it.
- Adjust microphone privacy settings. Open Windows Settings (Win + I), go to “Privacy & security,” then “Microphone.” Ensure “Microphone access” is turned on, and that “Let apps access your microphone” is enabled. Scroll down to make sure the specific app you’re using (like Discord, Zoom, or games) has permission toggled on.
- Update or reinstall the audio driver. Right-click the Start button and select “Device Manager.” Expand “Audio inputs and outputs” and find your Corsair Void mic. Right-click it and choose “Update driver,” then “Search automatically for drivers.” If Windows doesn’t find a new one, right-click again and select “Uninstall device,” then restart your PC—Windows will reinstall the driver automatically.
- Update firmware via iCUE (if applicable). If you have iCUE installed, open it, select your headset, and go to “Settings.” Look for a firmware update option. If an update is available, install it and restart your PC. If you don’t have iCUE, you can download it from Corsair’s official website.
- Disable audio enhancements. In the “Sounds” window, go to the “Recording” tab, right-click your Corsair Void mic, and select “Properties.” Go to the “Enhancements” tab and check “Disable all enhancements.” Click Apply and OK.
- Check the microphone level and boost. In the same “Properties” window, go to the “Levels” tab. Ensure the microphone volume is set to at least 80 and the boost is at +10 dB or lower (if available). Click Apply.
- Test the microphone. In the “Recording” tab, speak into the mic and watch the green bars next to the device. If they move, the mic is working. Then, open the app you’re using and run its own mic test (e.g., Discord’s voice settings).
Common Mistakes
- Using the wrong USB port: Some front-panel USB ports or hubs don’t provide enough power or data, causing intermittent mic issues. Always try a rear USB port.
- Forgetting to set the default device: Even if the mic is connected, Windows may still use another device (like a webcam mic) as the default.
- Overlooking the mute switch: The physical mute button on the headset is easy to bump accidentally.
- Ignoring privacy settings: Windows updates can reset app permissions, blocking mic access without warning.
- Not restarting after driver uninstall: Uninstalling the driver without restarting can leave the system in an inconsistent state.
Tips
- Keep the USB receiver and headset within a reasonable range (about 10 feet) to avoid wireless interference.
- If you’re using a wireless Void, make sure the headset is fully charged—low battery can cause mic dropouts.
- In iCUE, check the “Microphone” settings to ensure no noise reduction or sidetone is set too high, which can make your voice sound distant.
- After any driver or firmware update, restart your PC to ensure changes take effect.
Troubleshooting
If the above steps don’t fix the issue, try these additional checks:
- Test on another PC: Plug the headset into a different computer. If the mic works there, the issue is with your Windows settings or hardware port. If it doesn’t, the headset’s mic may be defective.
- Check for Windows updates: Go to Settings > Windows Update and install any pending updates. Sometimes a system update resolves audio driver conflicts.
- Run the audio troubleshooter: In Windows Settings, go to “System > Troubleshoot > Other troubleshooters” and run the “Recording Audio” troubleshooter. It can automatically detect and fix common problems.
- Disable other audio devices: If you have multiple microphones (e.g., a webcam), disable them in the Sound settings to prevent Windows from switching.
- Check the headset’s physical mute LED: Some Void models have a red LED when muted. If the LED is on, press the mute button to unmute.
- Reinstall iCUE: If iCUE is corrupted, it can interfere with the headset’s driver. Uninstall iCUE, restart, then download and install the latest version from Corsair’s site.
Frequently Asked Questions
Why is my Corsair Void mic not working in Discord but works elsewhere?
Discord has its own input device settings. Go to Discord’s User Settings > Voice & Video and select “Corsair Void” as the input device. Also, ensure the mic is not muted in Discord’s interface.
How do I know if my Corsair Void mic is muted?
Look for a small red LED near the mute button on the left earcup. If the LED is on, the mic is muted. Press the button to unmute.
Can I use the Corsair Void mic with a 3.5mm jack?
Some Void models come with a 3.5mm cable, but the mic may only work when connected via USB. Check your headset’s manual—if the 3.5mm jack is for audio only, you’ll need the USB connection for the mic.
Why does my Corsair Void mic sound quiet or distorted?
Open the microphone properties in Windows (as described in Step 8) and lower the boost if it’s set too high. Also, check that the mic is positioned close to your mouth (about 1-2 inches away) and not covered by clothing.
Do I need iCUE software for the Corsair Void mic to work?
No, the mic should work without iCUE as long as the drivers are installed. iCUE is only needed for advanced features like EQ, sidetone, and firmware updates.
What should I do if my Corsair Void mic is not detected at all?
Try a different USB port, restart your PC, and check Device Manager for any unknown devices. If the headset still isn’t recognized, the USB cable or receiver may be faulty—contact Corsair support for warranty options.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Fix Text Cursor Turning White in Windows 11
- Force Quit Non-Responding Apps on Mac: 6 Ways
- Chromebook Not Charging? Fix It Fast
- iPhone Won’t Make Calls but Texts Work? Fixes
- Android to iPhone Hotspot: Connect & Fix Issues
- Fix Dynasty Warriors 3 PC Problems: Step-by-Step Guide