This guide fixes the Windows Subsystem for Linux (WSL) error 0x80070057 (“The parameter is incorrect”), which typically appears when you try to start a distribution, run wsl --install, or update WSL. The error points to a corrupted WSL configuration, a broken virtual machine platform setting, or an outdated WSL kernel. Below are step-by-step fixes that have proven effective, starting with the simplest and moving to more advanced solutions.
What You’ll Need
- Windows 10 (version 2004 or later) or Windows 11
- Administrator access to run PowerShell or Command Prompt
- An internet connection to download WSL updates
- Backup of any important data inside WSL (in case you need to reset a distribution)
Step-by-Step
- Restart your computer. A simple reboot can clear temporary system state that sometimes triggers this error. If the error persists, continue.
- Update WSL to the latest version. Open PowerShell as Administrator and run:
wsl --update
This fetches the latest WSL kernel and components. If it fails, trywsl --update --web-downloadto bypass any Microsoft Store issues. - Check if WSL is properly enabled. Run in the same PowerShell window:
wsl --status
If you see a message about WSL not being installed, runwsl --installand reboot when prompted. - Enable the required Windows features. Open “Turn Windows features on or off” (search for it in the Start menu). Ensure these are checked:
- Windows Subsystem for Linux
- Virtual Machine Platform
If either was unchecked, check it, click OK, and reboot.
- Reset the WSL network and VM configuration. In an elevated PowerShell, run:
wsl --shutdown
Then delete the WSL configuration file by running:Remove-Item $env:USERPROFILE\.wslconfig -ErrorAction SilentlyContinue
This removes any custom settings that might be malformed. Then start WSL again. - Repair the specific distribution. If the error appears when launching a particular distro (e.g., Ubuntu), open PowerShell and run:
wsl --manage--set-version 2
Replace<distro-name>with the actual name (find it viawsl -l -v). If that fails, try resetting the distro (this deletes its data):wsl --unregister
Then reinstall the distro from the Microsoft Store. - Check the Windows registry for a corrupted Lxss key. Open Registry Editor (
regedit) as Administrator. Navigate toHKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Lxss. Look for any subkey with a malformed or emptyBasePathvalue. If found, right-click the subkey and delete it (only if you are comfortable; this removes the distro registration). Then reinstall the distro. - Reinstall the WSL kernel manually. Download the latest WSL2 kernel from the Microsoft WSL GitHub releases page (search “WSL2 Linux kernel update package”). Run the .msi installer as Administrator, then reboot.
- Disable and re-enable the Virtual Machine Platform. In an elevated PowerShell, run:
Disable-WindowsOptionalFeature -Online -FeatureName VirtualMachinePlatform -NoRestart
Then enable it again:Enable-WindowsOptionalFeature -Online -FeatureName VirtualMachinePlatform -NoRestart
Reboot. - As a last resort, reset Windows Update components. Run these commands in an elevated Command Prompt:
net stop wuauservnet stop cryptSvcnet stop bitsren C:\Windows\SoftwareDistribution SoftwareDistribution.oldren C:\Windows\System32\catroot2 catroot2.oldnet start wuauservnet start cryptSvcnet start bits
Then runwsl --updateagain.
Common Mistakes
- Skipping the reboot after enabling features or updating WSL. Many changes require a full restart to take effect.
- Running commands without Administrator privileges. WSL management commands often need elevated rights.
- Deleting the entire Lxss registry key instead of just a corrupted subkey. This can remove all WSL distributions.
- Using a 32-bit version of Windows. WSL2 requires 64-bit Windows. Check your system type in Settings > System > About.
- Forgetting to back up data before unregistering a distribution. That action permanently deletes all files inside the distro.
Tips
- Keep WSL updated regularly with
wsl --updateto avoid known bugs. - Use
wsl --versionto see the current WSL version and ensure it’s 1.0 or later. - If you have a custom
.wslconfigfile, validate its syntax. A missing or extra bracket can cause this error. - Run
wsl --debug-shell(if available) to access advanced diagnostics, but note that this is for experienced users. - Consider using Windows Terminal for better WSL integration, but it’s not required for the fix.
Troubleshooting
If the error persists after following all steps, try these additional checks:
- Check if Hyper-V is disabled. WSL2 needs the Hyper-V hypervisor. In an elevated PowerShell, run
systeminfoand look for “Hyper-V Requirements”. If it says “A hypervisor has been detected”, that’s fine. If not, you may need to enable Hyper-V in Windows Features (note: this can conflict with other virtualization software). - Verify that your BIOS/UEFI has virtualization enabled. Restart your computer, enter BIOS setup (usually by pressing F2, F10, or Del during boot), and look for “Intel VT-x” or “AMD-V” and ensure it’s enabled.
- Try creating a new Windows user account. A corrupted user profile can cause this error. Create a new local user, log in, and test WSL.
- Use the Windows Event Viewer. Look under Windows Logs > System for any errors related to “LXSS” or “WSL” around the time the error occurs. The details may point to a specific component.
- If you’re on Windows 10, ensure you have the latest cumulative update installed. Go to Settings > Update & Security > Windows Update and check for updates.
Frequently Asked Questions
What does error 0x80070057 mean?
It’s a Windows error code that means “The parameter is incorrect.” In the context of WSL, it usually indicates that WSL received an invalid configuration, a corrupted registry entry, or a missing system component.
Will this error damage my files inside WSL?
No. The error itself does not damage files. However, some fixes (like unregistering the distribution) will delete the distribution’s data. Always back up important files before attempting those steps.
Why does this happen after a Windows update?
Windows updates can sometimes change WSL-related settings or the Virtual Machine Platform. If the update leaves a component in an inconsistent state, WSL may fail with this error.
Can I fix this without reinstalling my distribution?
Yes. Most users resolve it by updating WSL, enabling the required features, or deleting a corrupted .wslconfig file. Reinstalling the distribution is only a last resort.
Is this error specific to WSL2?
It can occur in both WSL1 and WSL2, but it’s more common in WSL2 because of the virtual machine dependencies.
Do I need to disable other virtualization software like VMware or VirtualBox?
WSL2 uses Hyper-V, which can conflict with other hypervisors. If you have third-party virtualization software, you may need to disable its hypervisor or use WSL1 instead. However, this is not the most common cause of error 0x80070057.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to View Wi-Fi Password on iPhone
- How to Stream on Twitch from PC
- GTM vs Facebook Pixel: What’s the Difference?
- Windows 10 Won’t Boot? Fix It in 30 Minutes
- Ubuntu 26.04 LTS Requirements & Hardware Checks
- ATK0100 Driver: Do You Need to Install It?