sodcalculator

10 Tech How-To

Install Windows 10 VM on Synology NAS

Guide 10-54690 · Updated · Step by step

This guide walks you through installing a Windows 10 virtual machine on a Synology NAS using the built-in Virtual Machine Manager (VMM). You’ll end up with a fully functional Windows 10 desktop that runs on your NAS, accessible from any device on your network. Before starting, ensure your Synology model supports VMM (most Plus and higher models do), and that you have enough RAM and storage—8 GB RAM and 60 GB free space are a good baseline.

What You’ll Need

  • A Synology NAS with Virtual Machine Manager installed (free from Package Center).
  • At least 8 GB of RAM (16 GB recommended for smoother performance).
  • At least 60 GB of free storage space (more if you plan to install large applications).
  • A Windows 10 installation ISO file (download from Microsoft’s official site).
  • Optional: A Windows 10 product key (you can install without one, but it will show a watermark).

Step-by-Step

  1. Install Virtual Machine Manager: Open the Package Center on your Synology DSM, search for “Virtual Machine Manager,” and click Install. Wait for it to finish.
  2. Prepare the storage: Go to Storage Manager and ensure you have a volume with enough free space. If you plan to use an SSD for VM storage, create a separate volume for better performance.
  3. Upload the Windows 10 ISO: In DSM, open File Station, navigate to a shared folder (e.g., “vm”), and upload your Windows 10 ISO file there. Keep the path handy.
  4. Open Virtual Machine Manager: Launch VMM from the DSM main menu. On first run, it will guide you through initial setup—choose a storage location for VM files (the volume you prepared).
  5. Create a new virtual machine: Click “Create” > “Virtual Machine.” Choose “Windows” as the OS type and select the version (Windows 10).
  6. Configure hardware: Assign CPU cores (at least 2), RAM (4 GB minimum, 8 GB recommended), and create a virtual disk (60 GB or more). You can adjust these later.
  7. Attach the ISO: In the “Image” section, select the Windows 10 ISO file you uploaded. Ensure “Enable CD/DVD drive” is checked.
  8. Set network: Choose a virtual switch (usually “Default”) to give the VM network access. Leave the default settings unless you have specific VLAN needs.
  9. Review and create: Check the summary, then click “Create.” The VM will be created but not started yet.
  10. Start the VM and install Windows: Select the VM in VMM, click “Power” > “Power On.” Then click “Connect” to open the console window. The VM will boot from the ISO and start the Windows 10 installer.
  11. Follow the Windows setup: Choose your language, click “Install Now,” and follow the prompts. When asked for a product key, you can enter one or click “I don’t have a product key” to continue (Windows will run unactivated).
  12. Select the virtual disk: When asked “Which type of installation do you want?”, choose “Custom.” Select the unallocated space (the virtual disk) and click “Next.” Windows will partition and format it automatically.
  13. Complete installation: Windows will copy files and reboot several times. The VM will restart automatically; if it boots back to the ISO, you may need to remove the ISO from the virtual CD drive (in VM settings) to avoid a boot loop.
  14. Finish setup: After reboots, you’ll see the Windows 10 desktop. Install the Synology Guest Tool (available in VMM under the VM’s “Guest Tool” tab) for better performance and integration.

Common Mistakes

  • Insufficient RAM: Assigning less than 4 GB makes Windows 10 sluggish. If your NAS has limited RAM, consider using Windows 10 LTSC or a lighter OS.
  • Not enabling hardware virtualization: VMM requires hardware virtualization (Intel VT-x or AMD-V). If the VM fails to start, check that this is enabled in your NAS’s BIOS (if accessible) or that your NAS model supports it.
  • ISO not booting: If the VM boots to a black screen or directly to the hard drive, ensure the ISO is attached and the boot order is set to CD/DVD first (in VM settings).
  • Storage space miscalculation: Windows 10 needs ~20 GB for the OS, but updates and apps can fill 60 GB quickly. Allocate more if you plan to install software.

Tips

  • Use a static IP: Assign a static IP to the VM (either in Windows or via DHCP reservation) so you can connect via RDP without checking the IP each time.
  • Enable Remote Desktop: In Windows, enable Remote Desktop (Settings > System > Remote Desktop) to access the VM from other computers without opening the VMM console.
  • Snapshot before updates: Take a snapshot in VMM before major Windows updates so you can roll back if something goes wrong.
  • Backup the VM: Use Hyper Backup or VMM’s built-in backup to protect the VM file. A VM is just files—make sure they’re backed up.
  • Consider SSD storage: If your NAS has SSD cache or an SSD volume, store the VM there for significantly better performance.

Troubleshooting

VM won’t start: First, check that hardware virtualization is supported and enabled. On some Synology models, you may need to enable it in the BIOS (if accessible). Also, confirm you have enough RAM free—VMM reserves RAM for the VM, and if the NAS runs out, the VM won’t start.

Black screen during installation: This often happens due to a bad ISO or insufficient video memory. Try re-downloading the ISO, and in VM settings, increase the video RAM (if available). Also, ensure the VM is using the correct display adapter (VGA is safer than VirtIO for installation).

Windows installs but won’t boot: If the VM keeps booting to the ISO, remove the ISO from the virtual CD/DVD drive (edit VM settings and detach the image). Also, check the boot order—make sure the virtual disk is set as the first boot device.

Network not working in Windows: The default virtual switch should work. If not, check that the VM’s network adapter is enabled and set to “E1000” or “VirtIO” (try both). Also, verify that the NAS’s network interface is up and that you haven’t blocked the VM’s MAC address in your router.

Performance is very slow: This is usually due to insufficient RAM or CPU. Close other VMs or services on the NAS, and consider upgrading RAM. Also, ensure the VM is stored on a fast volume (SSD) and that you’ve installed the Synology Guest Tool, which includes optimized drivers.

Frequently Asked Questions

Can I run Windows 10 on any Synology NAS?

No, only models that support Virtual Machine Manager and have hardware virtualization (Intel VT-x or AMD-V) can run VMs. Check the Synology compatibility list for your model.

How much RAM do I need for a Windows 10 VM?

At least 4 GB, but 8 GB is recommended for smooth operation. Remember that the NAS itself also needs RAM for DSM and other services.

Do I need a Windows license?

You can install Windows 10 without a product key and use it indefinitely, but you’ll see a watermark and some personalization options will be disabled. To remove these, you need a valid license.

Can I access the VM from outside my network?

Yes, but you’d need to set up port forwarding on your router or use a VPN. For security, it’s best to use a VPN rather than exposing RDP directly to the internet.

Can I run other operating systems like Linux?

Yes, VMM supports various Linux distributions, as well as other Windows versions. The process is similar—just choose the correct OS type when creating the VM.

Will the VM slow down my NAS?

It can, especially if you have limited RAM or CPU. The VM uses dedicated resources, so other services may feel slower. Monitor resource usage in DSM and adjust VM settings if needed.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →