sodcalculator

10 Tech How-To

Overclock Ryzen 5 1500X on Gigabyte Motherboard

Guide 10-49063 · Updated · Step by step

Overclocking your Ryzen 5 1500X on a Gigabyte motherboard can give you a noticeable performance boost in games and productivity tasks, often reaching 3.8–4.0 GHz on all cores. This guide walks you through the BIOS settings step by step, from checking your cooling to stress testing. Before you start, make sure your CPU cooler is adequate (the stock Wraith Spire is okay for mild overclocks, but a tower cooler is better for higher clocks), your power supply is reliable, and you know your motherboard model (e.g., AB350, B450, X370, X470).

What You’ll Need

  • A Ryzen 5 1500X CPU installed on a Gigabyte motherboard (e.g., AB350-Gaming, B450 Aorus, X470 Aorus).
  • Updated BIOS – check Gigabyte’s website for the latest version for your exact board model.
  • Monitoring software: HWiNFO64 (for temperatures and voltages) and CPU-Z (to verify clocks).
  • Stress test software: Prime95 (small FFTs) or Cinebench R23 for quick stability checks.
  • Adequate cooling – at least the stock Wraith Spire, but a tower cooler like a Hyper 212 is recommended for 3.9 GHz+.
  • A notepad to record your starting values (base clock, voltage, temperatures).

Step-by-Step

  1. Prepare your system: Close all background apps, update Windows and chipset drivers, and note your current CPU temperature at idle (should be 30–40°C).
  2. Enter BIOS: Restart your PC and press Delete (or F2) repeatedly during boot to enter the Gigabyte UEFI BIOS.
  3. Load optimized defaults: In the BIOS, press F5 (or navigate to “Save & Exit” > “Load Optimized Defaults”) to ensure a clean baseline. Save and reboot, then re-enter BIOS.
  4. Navigate to Tweaker: In the main BIOS screen, click on the Tweaker tab (or press F2 for classic mode). This is where all overclocking settings live.
  5. Set CPU Clock Ratio: Find CPU Clock Ratio (or “CPU Frequency”). The default is 35 (for 3.5 GHz base). Change it to 37 (for 3.7 GHz) as a safe starting point.
  6. Set CPU Vcore: Scroll to CPU Vcore (sometimes called “VCore” or “CPU Voltage”). Set it to 1.25V – a safe voltage for daily use on 14nm Ryzen. Use the “Normal” or “Manual” mode, not “Auto” (Auto may overvolt).
  7. Disable Cool’n’Quiet (optional): In the “Advanced CPU Settings” submenu, set Cool’n’Quiet to Disabled to prevent the multiplier from dropping during stress tests (it can cause instability readings).
  8. Save and boot: Press F10 to save and exit. The system will reboot. If it fails to boot, don’t panic – the BIOS will usually reset after a few attempts, or you can clear CMOS (see Troubleshooting).
  9. Verify with CPU-Z: Once in Windows, open CPU-Z and check that the Core Speed shows ~3700 MHz under load. Run a quick Cinebench R23 multi-core test to see if it completes without crashing.
  10. Stress test: Run Prime95 (Small FFTs) for 15–30 minutes. Watch temperatures with HWiNFO64. If the CPU exceeds 85°C, lower the voltage or clock. If it crashes or shows errors, increase Vcore by 0.025V (up to 1.35V max for daily) or reduce the multiplier.
  11. Push further (optional): Once stable at 3.7 GHz, try 3.8 GHz with Vcore 1.3V, then 3.9 GHz with 1.35V. Each step requires a new stress test. Most 1500X chips hit 3.9–4.0 GHz, but some need 1.4V+ which is not recommended for 24/7.
  12. Set a final profile: When you find your stable settings, note them down. You can save them as a BIOS profile (in “Save & Exit” > “Profile”) so you can reload after a CMOS reset.

Common Mistakes

  • Using Auto voltage: Auto Vcore often pushes 1.4V+ when you raise the multiplier, which can degrade your CPU. Always set manual voltage.
  • Ignoring temperatures: Ryzen 5 1500X throttles at 95°C, but sustained 85°C+ shortens lifespan. Keep below 80°C under stress.
  • Not updating BIOS: Older BIOS versions have limited voltage ranges and may not support newer CPUs properly. Update first.
  • Setting too high a voltage for the stock cooler: The Wraith Spire can handle 1.25V, but 1.35V will likely overheat. Use a better cooler for high clocks.
  • Skipping stress tests: A quick boot into Windows doesn’t mean stable. Always run at least 15 minutes of Prime95.
  • Changing too many settings at once: Change only the multiplier and voltage. Leave memory settings alone unless you know what you’re doing.

Tips

  • Use the “Load Line Calibration” (LLC) setting – set it to High or Turbo to reduce voltage droop under load. In Gigabyte BIOS it’s under “Advanced Voltage Settings”.
  • Keep an eye on the SoC voltage – leave it on Auto, but if you’re also overclocking RAM, you may need to increase it to 1.1V (max 1.2V).
  • Test with RealBench or AIDA64 for a more realistic load than Prime95, which is overly harsh and can cause unrealistically high temps.
  • If your system crashes during gaming but not in stress tests, lower the clock by 100 MHz – games use different instruction sets that can trigger instability.
  • Monitor your VRM temperatures (if visible in HWiNFO) – on budget B350 boards, VRMs can overheat with high voltages.
  • For daily use, consider enabling PBO (Precision Boost Overdrive) if your motherboard supports it – it can auto-overclock to 3.9 GHz with less manual effort, though it’s less predictable.

Troubleshooting

  • System won’t boot after changing settings: The BIOS usually resets after 3 failed boots. If not, power off, unplug the PSU, and remove the CMOS battery for 30 seconds, or use the clear CMOS jumper on the motherboard.
  • Blue screen or crash during stress test: Increase Vcore by 0.025V (up to 1.35V) or lower the multiplier by 100 MHz. Also check that your RAM is running at its rated speed – if it’s overclocked via XMP, that can cause instability.
  • High temperatures (above 85°C): Reduce voltage or clock. Reapply thermal paste if your cooler is older. Check that the cooler is mounted correctly.
  • Clock speed stuck at 3.2 GHz: This is the base clock of the 1500X (3.5 GHz boost). Check that “Core Performance Boost” is enabled in BIOS (under Advanced CPU Settings). Also, Windows power plan should be set to “High Performance” or “Ryzen Balanced”.
  • CPU-Z shows 3.7 GHz but stress test shows lower: This is normal – the CPU may downclock due to power limits or thermal throttling. Check “Package Power” in HWiNFO; if it’s below 65W, you may need to raise the power limit in BIOS (under “AMD CBS” or “PB0”).
  • Voltage readings are higher than what you set: That’s LLC at work. If it’s over 1.4V, lower LLC to Medium or reduce the set voltage.

Frequently Asked Questions

Is 3.9 GHz safe for daily use on the Ryzen 5 1500X?

Yes, if you can keep the voltage at or below 1.35V and temperatures under 80°C under load. Many chips do 3.9 GHz at 1.3–1.35V, which is safe for 24/7 use.

Will overclocking void my warranty?

AMD does not officially cover overclocking damage, but in practice, as long as you stay within safe voltage limits (below 1.4V), the risk is minimal. Motherboard warranties may also be void if you damage the board, but that’s rare.

Do I need a better cooler than the stock Wraith Spire?

For 3.7 GHz at 1.25V, the stock cooler is adequate. For 3.8 GHz+ or voltages above 1.3V, a tower cooler like a Hyper 212 or a 120mm AIO is recommended to keep temps in check.

Can I overclock with a B350 motherboard?

Yes, all B350, B450, X370, and X470 boards support overclocking. However, budget B350 boards have weaker VRMs, so avoid extreme voltages (1.4V+) and ensure good case airflow.

Why does my overclock pass Prime95 but crash in games?

Games use different instruction sets (AVX, etc.) that can be more sensitive to instability. Lower your clock by 100 MHz or add 0.025V to Vcore to improve stability.

Should I also overclock my RAM?

Ryzen performance benefits from faster RAM (3000–3200 MHz). You can enable XMP in BIOS, but note that RAM overclocking can affect CPU stability. If you encounter issues, set RAM back to default first.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →