This guide walks you through recovering data from a failed or degraded RAID array on a Windows 10 PC. You’ll learn how to assess the situation, use built-in tools and free software to rebuild or extract your files, and what to do when things don’t go as planned.
What You’ll Need
- Administrator access to the Windows 10 machine.
- Another working computer or external drive with enough free space to store recovered data.
- If using software RAID (Storage Spaces or dynamic disks), the original disk order and a record of which disks were in the array.
- For hardware RAID (controller card), the controller’s management software or a compatible recovery tool.
- Patience: do not write new data to the array until recovery is complete.
Step-by-Step
- Stop using the array immediately. If the RAID is degraded (e.g., one disk failed), do not rebuild it yet. Any write operation can overwrite recoverable data. Power off the machine if necessary.
- Identify the RAID type and status. Open Disk Management (right-click Start → Disk Management). Look for volumes marked as “Failed”, “Failed Redundancy”, or “Offline”. If you see “Missing” or “Foreign”, note the disk numbers. For Storage Spaces, open Control Panel → Storage Spaces to see the virtual disk status.
- Check the physical connections. If a disk is not detected, reseat SATA/power cables, try a different port, or connect the disk to another computer to confirm it’s not dead. Do this before any software recovery.
- If the array is healthy but the volume is unreadable: Run
chkdsk /fon the drive letter (e.g.,chkdsk E: /f) from an elevated Command Prompt. This fixes file system errors but does not recover deleted files. It may take hours on large arrays. - If a disk has failed in a RAID 1/5/10: Replace the failed disk with a new one of equal or larger size, then use the RAID controller’s utility (or Storage Spaces) to “repair” or “rebuild” the array. This requires the array to be in a “degraded” state, not “failed”.
- If the array is not recognized at all: Use a third-party recovery tool like R-Studio, ReclaiMe, or DiskInternals RAID Recovery. Install the trial on a different computer, connect the RAID disks as individual drives (using a USB dock or direct SATA), and let the software scan for the RAID parameters (block size, order, parity).
- For software RAID (dynamic disks): In Disk Management, right-click the “Foreign” disk and choose “Import Foreign Disks”. If the array is “Failed”, right-click each disk and select “Reactivate Disk”. If that fails, use
diskpartto bring disks online: typediskpart, thenlist disk,select disk X,online disk. - For Storage Spaces: In Control Panel → Storage Spaces, click “Repair” if available. If the pool is missing, use PowerShell:
Get-StoragePool, thenRepair-StoragePool -Name "PoolName". If that fails, you may need to use a recovery tool that understands Storage Spaces. - Recover files from a rebuilt array. Once the volume is readable, copy all important data to a separate healthy drive. Do not rely on the array as your only copy.
- If the array cannot be rebuilt: Use a recovery tool to extract files directly from the individual disks. The tool will reconstruct the virtual RAID volume in memory and allow you to browse and copy files to another location.
Common Mistakes
- Rebuilding too early. If you rebuild a RAID 1 with a new disk before backing up, you may overwrite the only copy of data if the remaining disk fails during rebuild.
- Writing new data to the array. Installing software, saving files, or even running chkdsk on a degraded array can overwrite recoverable data.
- Ignoring disk order. For RAID 0/5/10, the order of disks matters. Mixing up the SATA ports or USB connections can make recovery impossible.
- Using the wrong recovery tool. Some tools only support specific RAID levels. Check compatibility before paying.
- Forgetting to check the health of other disks. If one disk failed, others may be failing. Use SMART diagnostics (CrystalDiskInfo) to check all disks.
Tips
- Always have a backup of critical data. RAID is not a backup; it protects against disk failure, not accidental deletion or corruption.
- If you have a hardware RAID controller, note the controller model and firmware version. Recovery tools often need this to reconstruct the array.
- Take a disk image of each physical disk before attempting recovery. Tools like ddrescue (on Linux) or HDD Raw Copy Tool can create images that you can work on without risking the original disks.
- Recovery tools often have a “preview” feature. Use it to verify that files are readable before paying for the full version.
- If the data is extremely valuable, consider sending the disks to a professional data recovery service. They have cleanroom facilities and specialized equipment.
Troubleshooting
Array shows as “Failed” but disks are healthy. Try importing foreign disks or reactivating them. If that fails, use a recovery tool that can scan for lost RAID configurations.
chkdsk reports “The type of the file system is RAW”. This means the file system is corrupted. Do not format the drive. Use a recovery tool to extract files from the RAW volume.
Recovery tool cannot find the RAID parameters. Manually specify the RAID level, stripe size, and disk order if you know them. If not, the tool may have an “auto-detect” feature that tries different combinations.
Disk is not detected at all. Check BIOS/UEFI to see if the disk is recognized. If not, try a different SATA port or a USB enclosure. If the disk clicks or makes unusual noises, power it off immediately – it may have mechanical damage.
Storage Spaces pool is missing. Open PowerShell as admin and run Get-PhysicalDisk to see if the disks are visible. If they are, try Repair-VirtualDisk. If not, the pool metadata may be corrupted; use a specialized tool that supports Storage Spaces.
Frequently Asked Questions
Q: Can I recover data from a failed RAID 0?
A: Yes, but only if at least one disk is still working. RAID 0 stripes data across all disks; if one fails, the array is broken. Recovery tools can reconstruct the data from the remaining disks if you know the stripe size and order.
Q: How long does RAID recovery take?
A: It depends on the array size and method. Chkdsk can take hours; a full disk image can take days for large drives. Professional services may take weeks.
Q: Is it safe to use free recovery software?
A: Many free tools are safe, but they may not support all RAID levels or may have file size limits. Always download from the official website and scan for malware.
Q: Can I rebuild a RAID 5 array with a smaller disk?
A: No. The replacement disk must be at least as large as the smallest disk in the array. Using a smaller disk will fail.
Q: What is the difference between hardware and software RAID recovery?
A: Hardware RAID uses a controller card that stores configuration in its own memory; you may need the same controller to read the array. Software RAID (like Windows Storage Spaces) stores metadata on the disks, making it easier to recover with generic tools.
Q: Should I attempt recovery myself or hire a professional?
A: If the data is irreplaceable and you are not confident, hire a professional. DIY attempts can make things worse. If you try, always work on disk images first.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Set a Google Play Budget & Stop Accidental Purchases
- Destiny 2 Error Code Anteater: Fixes & Causes
- View Android Photos on Chromebook: Step-by-Step
- Fix Windows Could Not Prepare the Computer to Boot
- Windows 11 Security Settings: Best Config Guide
- How to Clean Windows Outside: Step-by-Step Guide