If your Mac won’t mount a partition, the drive may be undetected in Finder, Disk Utility may show it as greyed out, or you may see an error like “The disk you inserted was not readable by this computer.” This guide walks you through safe recovery steps using built-in macOS tools, from simple checks to command-line repairs, so you can get your data back without third-party software.
What You’ll Need
- A Mac running macOS Catalina (10.15) or later (steps are similar for older versions)
- The external or internal drive that contains the unmountable partition
- A USB cable or adapter to connect the drive (if external)
- Time and patience – do not rush the repair process
- Optional: a second Mac or a backup drive to copy recovered files to
Step-by-Step
- Connect the drive and check the basics. Plug the drive into your Mac. If it’s an external drive, try a different port or cable. Make sure the drive has power (if it has its own adapter). Wait a few seconds for macOS to detect it.
- Open Disk Utility. Go to Applications > Utilities > Disk Utility, or press Command + Space, type “Disk Utility”, and press Return.
- Locate the unmountable partition. In Disk Utility, look at the sidebar under External or Internal. The problematic partition may appear greyed out, with a name like “disk2s1” or “Macintosh HD”. If you don’t see it, click View in the menu bar and choose Show All Devices to see the physical drive and all its partitions.
- Run First Aid on the partition. Select the unmountable partition (not the whole drive) in the sidebar. Click the First Aid button in the toolbar, then click Run. macOS will scan the volume and attempt to repair errors. Wait for it to finish – this can take several minutes for large drives.
- If First Aid fails, run it on the parent disk. Select the physical drive (the top-level item, e.g., “WD My Passport Media”) and run First Aid again. This checks the partition map and may fix issues that the volume-level check missed.
- Try mounting the partition manually. If First Aid succeeds or reports no problems, select the partition and click the Mount button in the toolbar. If it mounts, you’ll see it appear on your desktop or in Finder.
- Use Terminal for a deeper check (if needed). If First Aid didn’t help, open Terminal (in Utilities). Type
diskutil listand press Return to see all disks. Note the identifier of the unmountable partition (e.g.,disk2s1). Then rundiskutil verifyVolume /dev/disk2s1(replace with your identifier). This checks the volume’s file system structure without making changes. - Attempt a forced repair (only if verifyVolume shows errors). If verification finds problems, run
diskutil repairVolume /dev/disk2s1. This attempts to fix the file system. Important: This may cause data loss in rare cases, so back up any accessible data first. - Try mounting with Terminal. If the partition still won’t mount, use
diskutil mount /dev/disk2s1. If you get an error like “The disk is already unmounted” or “Resource busy”, trydiskutil mountDisk /dev/disk2(the whole disk) to mount all partitions. - Check if the partition is hidden or has a file system issue. Sometimes the partition is there but macOS doesn’t recognize the file system. In Terminal, run
diskutil info /dev/disk2s1to see the file system type (e.g., APFS, HFS+, exFAT). If it says “Unable to determine”, the partition table may be corrupt. - Use fsck in Recovery Mode (last resort). If all else fails, restart your Mac and hold Command + R to enter Recovery Mode. Open Disk Utility from there and run First Aid. If that fails, open Terminal from the menu bar (Utilities > Terminal) and run
fsck_apfs -n /dev/disk2s1(for APFS) orfsck_hfs -n /dev/disk2s1(for HFS+). The-nflag runs a read-only check. To repair, remove-n(e.g.,fsck_apfs /dev/disk2s1). - Recover data with third-party tools (if repair fails). If you cannot mount the partition, you may still be able to recover files using data recovery software like Disk Drill, PhotoRec, or TestDisk (free). These tools read the raw disk and can often recover files even when the partition is unmountable. Install the tool on another Mac or on the same Mac but to a different drive, then scan the unmountable partition.
Common Mistakes
- Running First Aid on the wrong disk. Always select the specific partition, not the whole drive, for volume repairs. Running it on the whole drive first can skip the partition.
- Ignoring the “Read-Only” message. If First Aid says the volume is read-only, it may be because the drive is mounted read-only. Unmount it first (click the eject icon) and then run First Aid.
- Using the wrong file system command. Running
fsck_hfson an APFS partition will fail. Check the file system type withdiskutil infobefore using fsck. - Not backing up before repair. Even though First Aid is generally safe, a repair can worsen existing damage. Always back up any files you can access before running repair commands.
- Disconnecting the drive during a repair. This can cause further corruption. Never unplug the drive while First Aid or fsck is running.
Tips
- Try a different Mac. Sometimes the issue is with the Mac’s USB port or power management. Plugging the drive into another Mac can help you determine if the problem is the drive or the computer.
- Use a powered USB hub. External drives that don’t get enough power can become unmountable. A powered hub can provide stable power.
- Check the cable. A faulty cable can cause intermittent disconnections. Try a different cable, ideally a short, high-quality one.
- Keep the drive cool. Overheating can cause read/write errors. If the drive feels hot, let it cool down before retrying.
- Use Disk Utility’s “Show All Devices” view. This gives you a clearer picture of the disk layout and helps you select the correct partition.
Troubleshooting
First Aid fails with “The underlying task reported failure”. This usually means the file system is severely damaged. Run First Aid on the parent disk (the physical drive) first, then try the partition again. If that still fails, use Terminal to run diskutil verifyVolume to get more details. If the volume is APFS, you can also try diskutil apfs unlockVolume /dev/disk2s1 if the partition is encrypted.
The partition doesn’t appear in Disk Utility at all. The partition map may be corrupt. Open Terminal and run diskutil list. If you see the disk but no partitions, the partition table is likely damaged. You can try rebuilding it with gpt commands, but this is risky. A safer option is to use a data recovery tool that scans the raw disk.
The drive mounts but shows as “Not Initialized” or “Uninitialized”. This is common with drives that were used on Windows or with a different file system. macOS may not recognize NTFS or ext4 partitions. Use a third-party NTFS driver (like Paragon or Tuxera) or access the drive on a Windows machine to copy files off. For ext4, use a Linux live USB.
You see “The disk you inserted was not readable by this computer.” Click Initialize if you want to erase the drive (losing data), or Ignore to try other methods. Do not initialize if you want to recover data – that will erase the partition table.
Recovery Mode fsck says “Invalid container” or “Container is not valid”. This indicates the APFS container is damaged. Try diskutil apfs list to see the container details. If the container is corrupt, you may need to use a third-party APFS recovery tool.
Frequently Asked Questions
Can I recover data from an unmountable partition without erasing it?
Yes, often you can. First Aid and fsck repair the file system without erasing data. If those fail, data recovery software can read raw data from the disk and recover files to another drive.
Will First Aid delete my files?
First Aid is designed to repair file system structures without touching your data. However, if the file system is badly damaged, it may mark some files as unrecoverable. Always back up what you can before running any repair.
What’s the difference between APFS and HFS+?
APFS (Apple File System) is the default for macOS High Sierra and later, optimized for SSDs. HFS+ (Mac OS Extended) is the older file system used on older Macs and some external drives. The repair commands differ: fsck_apfs for APFS, fsck_hfs for HFS+.
My partition is encrypted (FileVault). Can I still repair it?
Yes, but you’ll need to unlock the volume first. In Disk Utility, select the partition and click Mount – you’ll be prompted for the password. In Terminal, use diskutil apfs unlockVolume /dev/disk2s1. After unlocking, you can run First Aid.
How long does First Aid take?
It depends on the size of the drive and the extent of the damage. A small USB stick might take a few minutes, while a 2TB drive with errors can take over an hour. Let it run uninterrupted.
What if the drive is physically damaged?
If you hear clicking or grinding sounds, or the drive is not detected at all, it may be a hardware failure. Stop using the drive immediately and seek professional data recovery services. Do not run First Aid or fsck on a physically failing drive – it can make things worse.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Show User Library in macOS High Sierra & Sierra
- Device Manager Shortcut: Windows 10 Desktop
- How to Remove Forgotten Passcode from iPhone
- Fix Slow Wi-Fi Problem iPhone X: 9 Steps
- How to Check if a Candidate Accepts Crypto Donations
- How to Listen to Deleted Voicemails on iPhone