sodcalculator

10 Tech How-To

Fix Windows Won’t Boot After Software Changes

Guide 10-50839 · Updated · Step by step

This guide walks you through repairing a Windows PC that fails to boot after you installed, updated, or removed software. You’ll learn the exact startup repair, safe mode, and command-line steps to get back to a working desktop—no reinstall needed.

What You’ll Need

  • Another working PC (to create a bootable USB, if needed)
  • A USB drive with at least 8 GB (for the Windows installation media)
  • Your Windows product key (not always required, but helpful)
  • Patience—some steps take time

Step-by-Step

  1. Force shutdown and restart. If Windows is stuck on a black screen, spinning dots, or a blue error, hold the power button for 10 seconds until the PC turns off. Turn it back on. Do this twice. On the third boot, Windows should enter the Automatic Repair environment automatically.
  2. Open Advanced Startup Options. When you see the blue “Automatic Repair” screen, click Advanced options. If you don’t see it, you’ll need a Windows installation USB (see step 8).
  3. Run Startup Repair. In the blue menu, go to Troubleshoot → Advanced options → Startup Repair. Select your operating system (usually Windows 10 or 11) and wait. This scans for and fixes common boot issues like corrupted boot files. It may take 10–20 minutes.
  4. If Startup Repair fails, try Safe Mode. Go back to Troubleshoot → Advanced options → Startup Settings, then click Restart. After the PC restarts, press 4 or F4 for Safe Mode, or 5/F5 for Safe Mode with Networking.
  5. In Safe Mode, undo the recent change. If you installed a driver, app, or update, open Settings → Apps → Installed apps (or Programs and Features in Control Panel) and uninstall it. If you updated a driver, open Device Manager, right-click the device, choose Properties → Driver → Roll Back Driver.
  6. Use System Restore. If you can’t identify the culprit, go to Troubleshoot → Advanced options → System Restore. Pick a restore point from before the software change and follow the prompts. This reverts system files and settings without touching your personal files.
  7. Reboot normally. After any of the above, restart the PC. If it boots to the desktop, you’re done. If not, continue.
  8. Create a Windows installation USB. On another PC, go to Microsoft’s official Windows download page, download the Media Creation Tool, and run it. Choose “Create installation media for another PC”, select your language and edition, and write it to a USB drive.
  9. Boot from the USB. Insert the USB into your broken PC, restart, and press the boot menu key (often F12, F10, or Esc, depending on the manufacturer) during startup. Select the USB drive.
  10. Use Command Prompt to fix boot files. On the first Windows Setup screen, click Next → Repair your computer → Troubleshoot → Advanced options → Command Prompt. Then type these commands one by one, pressing Enter after each:
    bootrec /fixmbr
    bootrec /fixboot
    bootrec /scanos
    bootrec /rebuildbcd
    Close the Command Prompt and restart.
  11. If that doesn’t work, run DISM and SFC. In the same Command Prompt, type:
    dism /online /cleanup-image /restorehealth
    then
    sfc /scannow
    These repair corrupted system files. Restart after they finish.
  12. Reset this PC as a last resort. From the Advanced options menu, choose Troubleshoot → Reset this PC. Select Keep my files to reinstall Windows while preserving your personal data (but note that installed apps will be removed).

Common Mistakes

  • Skipping the two forced restarts. Windows needs three failed boots to trigger Automatic Repair. If you don’t force shutdown twice, you might never see the recovery menu.
  • Choosing the wrong restore point. Picking a point after the problem started will not help. Always choose the oldest available point that predates the software change.
  • Running bootrec commands without administrator privileges. The Command Prompt opened from the recovery environment is already elevated, but if you’re in Safe Mode, you must right-click Command Prompt and select “Run as administrator”.
  • Unplugging the USB too early. When booting from the installation media, leave it in until Windows fully loads. Removing it mid-process can cause a boot loop.
  • Ignoring BitLocker. If your drive is encrypted, you’ll need your BitLocker recovery key before you can access files or run repairs. Have it ready.

Tips

  • Always create a restore point before installing software. Search “Create a restore point” in Windows, select your drive, and click Create. This gives you a quick undo button.
  • Keep a Windows installation USB handy. Even if you never use it, it’s a lifesaver when the system won’t boot.
  • Write down your BitLocker recovery key. Store it in your Microsoft account or on paper. Without it, you cannot decrypt the drive.
  • When in Safe Mode, use Device Manager to roll back drivers. This is often faster than uninstalling and reinstalling.
  • After a successful repair, run Windows Update. This ensures all system files are up to date and can prevent future boot issues.

Troubleshooting

Startup Repair says it couldn’t repair your PC. This is common. Move on to Safe Mode or Command Prompt steps. If Safe Mode won’t load either, your boot files may be severely corrupted—try the bootrec commands first, then DISM/SFC.

Safe Mode loads but the screen is blank. Wait a few minutes—drivers may be loading slowly. If nothing appears, restart and try Safe Mode with Networking, which loads additional drivers.

You don’t see the Advanced options menu. If the forced restarts don’t trigger it, you need the installation USB. If you don’t have one, you can create it on another PC, or borrow a friend’s.

bootrec /fixboot gives “Access is denied”. This happens on UEFI systems. Instead, run bootrec /fixmbr and bootrec /rebuildbcd, then restart. If it persists, try chkdsk C: /f (replace C: with your Windows drive letter) to fix disk errors.

Command Prompt doesn’t recognize your drive. Type diskpart, then list volume to see drive letters. Windows may be on D: or E: in the recovery environment. Use the correct letter in commands.

Reset this PC fails. If Reset gets stuck or errors, you may need to reinstall Windows entirely from the USB. Choose “Custom install” and select the drive with Windows, but be aware this deletes everything.

Frequently Asked Questions

Q: Will I lose my files if I use System Restore?
A: No. System Restore only changes system files and settings. Your documents, photos, and other personal files remain untouched.

Q: How long does Startup Repair take?
A: Usually 10–20 minutes, but it can take longer on older hard drives. Let it finish—interrupting can cause more damage.

Q: Can I repair Windows without a USB drive?
A: Yes, if Automatic Repair triggers. Otherwise, you’ll need installation media. Some PCs have a hidden recovery partition—you can access it by pressing a key like F11 during startup, but this varies by manufacturer.

Q: What if I don’t have a restore point?
A: You can still use Safe Mode to uninstall the problematic software, or run DISM and SFC from Command Prompt. A restore point is helpful but not required.

Q: Will Reset this PC remove my personal files?
A: If you choose “Keep my files,” your personal files stay, but all installed programs and settings are removed. If you choose “Remove everything,” the drive is wiped clean.

Q: Why did my PC boot into a blue screen after an update?
A: This is often caused by a driver or system file conflict. The repair steps above—especially Startup Repair and rolling back the driver—usually resolve it.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →