sodcalculator

10 Tech How-To

Reset Windows 10 Local Admin Password Without Disk or USB

Guide 10-55494 · Updated · Step by step

This guide shows you how to reset a forgotten Windows 10 local administrator password using only tools already built into the system—no installation disk, USB drive, or third-party software required. You’ll use the Windows Recovery Environment and a simple command-line trick to replace the login screen’s accessibility button with a command prompt, then set a new password. This works on most Windows 10 PCs that are not encrypted with BitLocker, and you’ll need physical access to the machine.

What You’ll Need

  • Physical access to the Windows 10 computer.
  • Knowledge of the Windows version (Settings > System > About) to confirm it’s Windows 10.
  • An administrator account name (even if you don’t know its password).
  • Optional: a blank USB drive if you need to create a recovery drive beforehand (but not required for this method).

Step-by-Step

  1. Boot into the Windows Recovery Environment (WinRE). Restart the PC. As it boots, press and hold the power button to force shutdown. Repeat this 3 times. On the third restart, Windows should display “Preparing Automatic Repair” and then the blue Recovery screen. If it doesn’t, you can also hold Shift while clicking Restart from the login screen.
  2. Open Advanced Options. On the blue screen, click Advanced options.
  3. Go to Troubleshoot. Click Troubleshoot.
  4. Open Command Prompt. Click Advanced options again, then Command Prompt. The system may ask you to choose an account and enter its password—if you don’t know it, click Continue or Skip if available. If it insists, you can use the “Reset password” link on the login screen later, but usually you can proceed.
  5. Back up the original accessibility tool. At the command prompt, type the following and press Enter after each line:
    copy c:\windows\system32\utilman.exe c:\windows\system32\utilman.exe.bak

    This creates a backup of the original Ease of Access utility.

  6. Replace utilman.exe with cmd.exe. Type:
    copy /y c:\windows\system32\cmd.exe c:\windows\system32\utilman.exe

    This overwrites the accessibility button with a command prompt. Press Enter and wait for the confirmation.

  7. Close the command prompt. Type exit and press Enter, then click Continue to boot Windows normally.
  8. Trigger the modified utility. On the login screen, click the Ease of Access icon (the little person with a clock) in the bottom-right corner. Instead of opening accessibility settings, a command prompt window will open.
  9. Reset the password. In the command prompt, type the following, replacing username with your actual account name:
    net user username newpassword

    For example: net user John Doe P@ssw0rd123. Press Enter. You should see “The command completed successfully.”

  10. Close the command prompt and log in. Type exit, then click anywhere on the login screen. Enter the new password to sign in.
  11. Restore the original utilman.exe. After logging in, open an elevated Command Prompt (right-click Start, select “Command Prompt (Admin)” or “Windows PowerShell (Admin)”) and run:
    copy /y c:\windows\system32\utilman.exe.bak c:\windows\system32\utilman.exe

    This restores the original Ease of Access tool. Delete the backup file if you wish.

Common Mistakes

  • Typing the username incorrectly: The net user command is case-insensitive for the username, but it must match exactly. If you see “The user name could not be found,” check the spelling and try the full name (e.g., “John” vs “John Doe”).
  • Forgetting to restore utilman.exe: Leaving cmd.exe in place is a security risk and may break the Ease of Access utility. Always restore from the backup after resetting the password.
  • Using the wrong path: On some systems, the Windows drive may be D: or E: during recovery. Use dir c:\ to check, and adjust the paths accordingly.
  • BitLocker encryption: If the drive is BitLocker-encrypted, you’ll be prompted for the recovery key before you can access the files. Without it, this method won’t work.
  • Not forcing shutdown correctly: If you don’t interrupt boot three times, Windows may boot normally. Make sure to hold the power button until the screen goes black.

Tips

  • Use a strong password: Choose a mix of letters, numbers, and symbols. Avoid using obvious words or dates.
  • Write down your password: Keep it in a secure place, like a password manager, to avoid this situation again.
  • Create a password reset disk: For future, you can create a password reset disk on a USB drive (Control Panel > User Accounts > Create a password reset disk). This is easier than this method.
  • Consider a Microsoft account: If you use a Microsoft account instead of a local account, you can reset the password online at account.live.com/password/reset. This method only works for local accounts.

Troubleshooting

  • Recovery screen doesn’t appear: If you can’t get to WinRE, try inserting a Windows 10 installation USB (if you have one) and boot from it, then select “Repair your computer.” If you don’t have a USB, you can create one on another PC using the Media Creation Tool.
  • Command Prompt not available: In some WinRE versions, you may need to click “Troubleshoot” > “Advanced options” > “Startup Settings” > “Restart” and then press F6 to enable Safe Mode with Command Prompt. But this usually requires a password anyway. The three-times shutdown method is the most reliable.
  • “Access is denied” when copying: This usually means the command prompt is not running as administrator. In WinRE, it should be. If not, try using the “Shift + Restart” method from the login screen, which gives a more complete recovery environment.
  • “The user name could not be found”: List all accounts by typing net user at the command prompt. Use the exact name shown.
  • Password reset works but can’t log in: Ensure you’re using the correct username and password. Try typing the password in Notepad to see if the keyboard layout is different (e.g., @ vs “).
  • BitLocker recovery key required: If you have BitLocker enabled, you’ll need the 48-digit recovery key. Check your Microsoft account (if linked) or your organization’s IT department. Without it, you cannot proceed.

Frequently Asked Questions

  1. Will this method work on Windows 11? Yes, the same technique works on Windows 11, but the recovery environment may look slightly different. The paths and commands are identical.
  2. Is this legal? Yes, as long as you own the computer or have permission from the owner. It’s a standard recovery technique used by IT professionals.
  3. What if I have a Microsoft account? This method only works for local accounts. For Microsoft accounts, you must reset the password online.
  4. Can I use this to bypass a domain password? No, this only works for local accounts on a standalone PC. Domain accounts are managed by the server and cannot be reset this way.
  5. Will this damage my files? No, it only changes the password. Your files and settings remain untouched.
  6. What if I can’t find the Ease of Access icon? On some login screens, it’s a small icon in the bottom-left or bottom-right corner. If you don’t see it, try pressing any key to dismiss the lock screen, then look again.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →