Booting your computer from a CD or DVD is necessary when you need to install an operating system, run a recovery tool, or use a live Linux environment. This guide walks you through changing the boot order in your system’s BIOS or UEFI firmware so your computer looks at the optical drive before the hard drive. You’ll need the bootable disc and, if your PC is modern, a way to access the boot menu (usually a key like F12 or Esc).
What You’ll Need
- A bootable CD or DVD (e.g., Windows installation disc, Linux live disc, or rescue disk).
- Access to your computer’s BIOS/UEFI setup or boot menu (a key press during startup).
- Your computer’s manual or manufacturer’s website if you’re unsure of the exact key.
Step-by-Step
- Insert the disc: Place the bootable CD/DVD into your optical drive. Make sure it’s properly seated and the drive closes completely.
- Restart your computer: Save any open work and reboot. Watch the screen for a brief message like “Press F12 for Boot Menu” or “Press DEL to enter Setup.” This usually appears within the first few seconds.
- Enter the boot menu (recommended): Press the key that opens the one-time boot menu (often F12, F11, Esc, or F9). This lets you choose the optical drive without permanently changing settings. If a menu appears, use arrow keys to select your CD/DVD drive and press Enter.
- If no boot menu, enter BIOS/UEFI: Press the setup key (often DEL, F2, F10, or F1) instead. The BIOS/UEFI interface will load.
- Locate boot options: In the BIOS/UEFI, find the “Boot” tab or section. It may be labeled “Boot Order,” “Boot Priority,” or “Startup.” Use arrow keys or a mouse (in UEFI) to navigate.
- Change the boot order: Move the CD/DVD drive to the top of the list. In classic BIOS, you typically select an entry and press +/- or F5/F6 to move it. In UEFI, you may drag and drop or use buttons. Ensure the optical drive is listed before the hard drive.
- Save and exit: Press F10 (or select “Save & Exit”) to save changes and restart. Confirm the save when prompted.
- Wait for the prompt: Some discs show “Press any key to boot from CD…” – do so quickly, or the computer will skip to the hard drive.
Common Mistakes
- Missing the key prompt: The message flashes briefly. If you miss it, restart and try again.
- Wrong key: Pressing DEL when your system uses F2. Check your manual or look for on-screen text.
- Not saving changes: Exiting without saving (e.g., pressing Esc) leaves the order unchanged.
- Disc not bootable: A data disc or a scratched disc won’t boot. Verify the disc is truly bootable.
- Secure Boot interference: On Windows 10/11 PCs, Secure Boot may block some discs. Temporarily disable it in UEFI settings.
Tips
- Use the one-time boot menu for a single boot – it’s faster and doesn’t change permanent settings.
- After installation, revert the boot order to put the hard drive first to avoid accidental disc boots.
- If your PC lacks an optical drive, consider a USB drive – the process is similar.
- Write down your current boot order before changing it, so you can restore it later.
Troubleshooting
Computer still boots to the hard drive: Re-enter BIOS/UEFI and confirm the CD/DVD is first. Also, check that the disc is readable – try it in another computer if possible. If the disc is fine, try a different optical drive or clean the lens.
Boot menu doesn’t show the optical drive: The drive may be disabled in BIOS. Go to “Integrated Peripherals” or “SATA Configuration” and ensure the optical drive is enabled. Also, check the SATA cable connection inside the PC.
“Press any key” prompt doesn’t appear: Some discs are not configured to show this. If the disc is bootable, it should start automatically. If not, the disc may be damaged or not bootable.
BIOS/UEFI is password-protected: If you don’t know the password, you may need to reset the CMOS (refer to your motherboard manual) or contact the manufacturer.
Frequently Asked Questions
Why can’t I boot from CD even though it’s first in the boot order?
The disc might not be bootable, or the drive might be faulty. Try a known-good bootable disc, and check the drive’s connection.
Is it safe to change the boot order?
Yes, it’s a standard procedure. Just save your original settings so you can revert if needed.
Do I need to change BIOS settings for a one-time boot?
No, use the boot menu (F12 or similar) to select the disc once without changing permanent settings.
What if my computer doesn’t have a CD/DVD drive?
Use a USB drive instead. The process is similar – set USB as the first boot device.
Can I boot from CD on a Mac?
Yes, restart and hold the Option (Alt) key to select the optical drive. For older Macs, hold C to boot from CD.
How do I know if my disc is bootable?
Look for files like “autorun.inf” or “bootmgr” on the disc, or try booting it – if it starts, it’s bootable.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Create App Shortcuts in Windows 10 Start Menu
- How to Rename a SQL Server Database
- Fix Google Calendar Not Syncing on iPhone
- Fix Skype Microphone Not Working on Windows
- Google Docs Landscape: Change Page Orientation
- Recover Deleted Admin Account in Windows 11