This guide shows you how to control which audio device your iPhone uses by default—whether you want sound to always come from the built-in speaker or automatically switch to connected headphones or earbuds. You’ll learn the exact settings to change, plus what to do when audio doesn’t route where you expect. No special tools are needed, just your iPhone’s Settings app.
What You’ll Need
- An iPhone running iOS 14 or later (the steps are similar on older versions).
- Your headphones or earbuds (wired or Bluetooth) if you want them as the default.
- Access to the Settings app (the gear icon on your home screen).
Step-by-Step
- Open Settings. Tap the gray gear icon on your home screen or in your App Library.
- Tap “Bluetooth” (for wireless headphones). If you’re using Bluetooth headphones or earbuds, make sure they’re powered on and in pairing mode. Under “My Devices,” tap the “i” icon next to your headphones.
- Set the device type (if needed). On the device info page, tap “Device Type” and choose “Headphone” if it isn’t already set. This tells iOS to treat it as an audio output rather than a speaker or other accessory.
- Go back to Settings and tap “Sounds & Haptics.” This is where you control where audio plays for calls, alerts, and media.
- Check “Headphone Safety” (optional). Under “Headphone Audio,” you can enable “Headphone Notifications” or “Reduce Loud Sounds.” This doesn’t change the default output, but it ensures your headphones are recognized as the active audio path.
- For wired headphones: Simply plug them into the Lightning or USB-C port. iOS automatically routes audio to them. If you want to force audio to the speaker instead, unplug the headphones.
- Use Control Center for quick switching. Swipe down from the top-right corner (iPhone X and later) or swipe up from the bottom (iPhone SE and older). Press and hold the audio card (the one with the music note or speaker icon). Tap the circular icon with a triangle and dots to see a list of available outputs. Tap the device you want to use.
- Set a default for “Audio/Video” in Settings (for CarPlay). If you use CarPlay, go to Settings > General > CarPlay, select your car, then tap “Audio/Video.” Here you can choose “Default Audio Output” to be “Car” or “iPhone.” This is handy if you want phone calls to come through the car speakers but media to stay on your headphones.
- Restart your iPhone if changes don’t stick. Sometimes a quick restart (press and hold power + volume, then slide to power off) clears audio routing glitches.
Common Mistakes
- Forgetting to check Bluetooth. If your headphones aren’t connected, iOS won’t list them as an option. Make sure they’re paired and showing as “Connected” in Settings > Bluetooth.
- Choosing the wrong device type. Some earbuds are recognized as “Other” or “Speaker” if you don’t manually set them to “Headphone.” This can cause audio to play through the iPhone speaker instead.
- Assuming the speaker is always the default. iOS remembers the last output you selected. If you used headphones last time, it may try to reconnect to them automatically, even if they’re not in your ears.
- Not checking the volume. If you don’t hear anything, it might not be a routing issue—check the volume buttons and the silent switch (the physical switch above the volume buttons).
- Confusing “Default” with “Automatic.” iOS doesn’t have a single “default audio device” setting like a computer. It uses the last connected device, so you must manually select the speaker or headphones each time.
Tips
- Use Automation to force a default. In the Shortcuts app, create a personal automation that runs when you connect a specific Bluetooth device. Add an action like “Set Playback Destination” to your headphones or speaker. This makes the switch automatic.
- Turn off “Auto-Join” for Wi‑Fi calling. If you use Wi‑Fi calling, audio may route to your Wi‑Fi network’s speaker. Go to Settings > Phone > Wi‑Fi Calling and toggle off “Add Wi‑Fi Calling for Other Devices” if you don’t want that.
- Check individual app settings. Some apps (like YouTube or Spotify) have their own audio output selection. Look for a speaker icon inside the app and tap it to see if it overrides your system default.
- Use “Live Listen” with Made for iPhone hearing aids. If you have hearing aids, they appear as audio devices. You can set them as the default in Settings > Accessibility > Hearing Devices.
- Keep Bluetooth off when you want the speaker. If you never want audio to go to headphones, turn off Bluetooth entirely. This forces iOS to use the built-in speaker.
Troubleshooting
Audio still plays from the speaker when headphones are connected: First, check that the headphones are actually connected—go to Settings > Bluetooth and see if they show “Connected.” If they do, unpair and re-pair them. Also, try plugging and unplugging wired headphones a few times to clean the port. If the issue persists, restart your iPhone.
Headphones connect but no sound comes out: Make sure the volume is up (press the volume up button) and that the silent switch is not set to silent (the orange should not be visible). Also, check the headphone’s own volume controls—some have a separate volume wheel.
Audio routes to the wrong device after a call: This is a known iOS quirk. After a call, tap the audio output icon in the Phone app (the speaker icon) and choose your desired device. To prevent it, end calls with the red button, not by turning off Bluetooth.
No option for “Default Audio Output” in CarPlay: This setting only appears when your car is connected. If you don’t see it, make sure your car supports it (most modern cars do). If not, you can still switch audio via Control Center while driving.
Settings keep reverting to the speaker: This can happen if your headphones have a low battery and disconnect. Charge them and reconnect. Also, check if you have “Auto-Answer Calls” enabled in Settings > Accessibility > Touch—that can sometimes force audio to the speaker.
Frequently Asked Questions
Q: Can I set a permanent default audio output on iPhone?
A: No, iOS doesn’t have a permanent default like a computer. It uses the last connected device. You can use Shortcuts automations to make it switch automatically when you connect a specific device.
Q: Why does my iPhone play audio from the speaker even when headphones are plugged in?
A: This usually happens if the headphones are not fully plugged in, the port is dirty, or the headphones are not recognized. Try cleaning the port and re-plugging. If it’s Bluetooth, check that they’re connected and set as “Headphone” in Bluetooth settings.
Q: How do I make my iPhone always use the speaker for calls?
A: During a call, tap the speaker icon. To make it stick, you can turn off Bluetooth and avoid using wired headphones. There’s no setting to force speaker for all calls, but you can use “Auto-Answer Calls” with a Bluetooth device set to speaker mode—though that’s not a true default.
Q: Does the “Default Audio Output” in CarPlay affect my headphones?
A: No, that setting only applies to CarPlay. It chooses whether audio goes to the car’s speakers or the iPhone’s speaker while connected to CarPlay. Your headphones are separate.
Q: Can I set different defaults for different apps?
A: Not system-wide. Some apps have their own output selector (like the speaker icon in Spotify). You’ll need to change it per app.
Q: Why does my iPhone show “Headphones” as connected but no sound comes out?
A: Check the headphone’s volume and mute switch. Also, try disconnecting and reconnecting. If it’s Bluetooth, forget the device and re-pair. If it’s wired, try a different pair to rule out a port issue.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Fix Text Cursor Turning White in Windows 11
- Force Quit Non-Responding Apps on Mac: 6 Ways
- Chromebook Not Charging? Fix It Fast
- iPhone Won’t Make Calls but Texts Work? Fixes
- Android to iPhone Hotspot: Connect & Fix Issues
- Fix d3dx9 38.dll Missing or Not Designed to Run on Windows