sodcalculator

10 Tech How-To

How to Take Underwater Photos with iPhone

Guide 10-51499 · Updated · Step by step

Taking underwater photos with an iPhone opens up a whole new world of travel, pool, and snorkeling shots. This guide covers the gear you need, step-by-step shooting techniques, and how to fix common problems like blurry shots or foggy lens. Whether you’re using a waterproof case or a newer iPhone with built-in water resistance, you’ll get practical tips that work in real conditions.

What You’ll Need

  • iPhone with water resistance – iPhone 7 and later are rated IP67 (1 meter for 30 minutes); iPhone 12 and later are IP68 (up to 6 meters for 30 minutes, depending on model). Check Apple’s specs for your exact model.
  • Waterproof case or pouch – For deeper dives or peace of mind, use a dedicated waterproof case rated for the depth you plan to go. Options range from hard cases to flexible pouches.
  • Lanyard or wrist strap – Prevents dropping your phone in deep water.
  • Microfiber cloth – For drying and cleaning the lens before and after.
  • Fresh water – For rinsing the phone after saltwater or chlorinated water exposure.
  • Optional: external light or filter – Red filters help restore color in deeper water; a video light improves clarity.

Step-by-Step

  1. Check your iPhone’s water resistance rating. Look up your model on Apple’s website. Remember that the rating assumes clean, fresh water, no drops or damage, and that the phone is not in a high-pressure water stream. If you’re going deeper or longer than the rating, use a waterproof case.
  2. Choose the right case or pouch. If you’re just doing shallow pool shots, a simple waterproof pouch with a clear window works. For snorkeling or diving, get a hard case with a depth rating higher than your planned depth. Test the case with a tissue inside before trusting it with your phone.
  3. Prepare your phone. Remove any thick case that isn’t waterproof. Clean the lens with a microfiber cloth. Close all ports (lightning/USB-C) – they’re sealed, but make sure they’re dry. If using a pouch, place the phone inside and seal it according to the manufacturer’s instructions, ensuring no hair or sand is caught in the seal.
  4. Set up the camera before going underwater. Open the Camera app, switch to the mode you want (Photo, Video, or Time-lapse), and adjust focus/exposure by tapping on the subject. If you’re using a case with a physical shutter button, test it. Otherwise, use the volume buttons to take photos – they’re easier to press than the on-screen shutter when underwater.
  5. Use the volume buttons as your shutter. The on-screen button is hard to press through a case and can cause camera shake. The volume up or down buttons work just as well and are easier to locate by feel.
  6. Get close to your subject. Water acts as a magnifier and reduces contrast. The closer you are, the better the detail and color. Aim for 1-2 feet (30-60 cm) from fish or objects. Use the widest lens (0.5x on Pro models) to fit more in the frame.
  7. Shoot in bursts or take multiple shots. Underwater, your subject moves, and so do you. Hold the volume button down to shoot a burst, or just tap it repeatedly. You’ll have more options to choose from later.
  8. Use the grid and rule of thirds. Turn on the grid in Settings > Camera. Position your subject off-center for more interesting compositions. This also helps you keep horizons level, which is tricky underwater.
  9. Edit your photos after. Underwater photos often look blue or green. Use the built-in Photos app to adjust temperature, tint, and exposure. Increase contrast and saturation slightly to bring back life.
  10. Rinse your phone with fresh water. After swimming, gently rinse the phone (or case) with fresh water to remove salt or chlorine. Dry it with a soft cloth before opening any ports.

Common Mistakes

  • Relying on the on-screen shutter. It’s nearly impossible to press accurately underwater, and the pressure causes blur.
  • Shooting from too far away. Water scatters light and reduces clarity. If you’re more than 3 feet away, your subject will look like a blurry blob.
  • Not using a case for saltwater. Even if your iPhone is IP68, saltwater is more corrosive and can damage seals over time. A case adds a layer of protection.
  • Forgetting to turn off the flash. The flash reflects off particles in the water, creating white spots. Keep it off.
  • Opening the pouch too soon. If you open a waterproof pouch while wet, water can get inside. Dry the outside thoroughly first.
  • Not checking the case for damage. A tiny crack or worn seal can let water in. Inspect the case before each use.

Tips

  • Use a red filter for deeper water. At depths beyond 10 feet (3 meters), red light is absorbed, making everything blue. A red filter (clip-on or built into a case) restores warm colors.
  • Add an external light. A small dive light or video light illuminates your subject and brings out colors. Position it to the side to avoid backscatter.
  • Shoot in 4K video and take screenshots. Video captures movement and you can extract still frames later. This is especially useful for fast-moving fish.
  • Use the ultra-wide lens. On iPhone 11 Pro and later, the 0.5x lens is great for underwater because it has a wider field of view and you can get closer without cutting off the subject.
  • Learn to control your buoyancy. If you’re scuba diving, practice neutral buoyancy so you don’t stir up sand or accidentally bump into coral. In a pool, move slowly to avoid bubbles.
  • Clean the lens after every dive. Water spots and fingerprints ruin clarity. Rinse and dry the lens before each shot.

Troubleshooting

  • Photos are blurry. This is usually due to camera shake. Hold the phone steady, use both hands, and press the volume button gently. If you’re in a current, brace against a rock or use a short pole. Also, make sure the lens is clean – water droplets cause blur.
  • Photos are too blue or green. This is normal. Use the Photos app to adjust the white balance. Tap the auto button, then drag the temperature slider toward yellow/orange. Increase saturation slightly.
  • Water got inside the case or pouch. Immediately remove the phone, turn it off, and dry it with a cloth. Do not charge it. Place it in a bowl of dry rice or silica gel packets for 24-48 hours. If it doesn’t turn on, take it to a repair shop. (Note: this is not a guaranteed fix, but it’s the best immediate action.)
  • The case fogs up. This is condensation from moisture inside the case. Before sealing, make sure the inside is dry. Some cases come with anti-fog inserts. If it fogs, open the case, dry it, and try again with a desiccant packet.
  • Touch screen doesn’t respond. Underwater, the capacitive touchscreen doesn’t work well. That’s why you use the volume buttons. If you need to change settings, do it before going underwater or use a case with a physical shutter button.
  • Phone won’t turn on after being in water. If your phone was submerged beyond its rating or in saltwater, it may have water damage. Do not try to charge it. Turn it off and take it to a professional. Apple’s warranty doesn’t cover water damage, but some credit cards offer purchase protection.

Frequently Asked Questions

Can I take my iPhone in the pool without a case?

Yes, if it’s an iPhone 7 or later and you stay within the depth and time limits (e.g., 1 meter for 30 minutes for IP67). However, pool chemicals can be harsh, so rinsing with fresh water afterward is essential. For peace of mind, a case is recommended.

How deep can I take my iPhone?

It depends on the model. iPhone 7-11 are rated to 1 meter for 30 minutes. iPhone 12-15 are rated to 6 meters for 30 minutes. Check Apple’s specifications for your exact model. For deeper dives, you need a waterproof case with a higher depth rating.

Why do my underwater photos look blue?

Water absorbs red light first, so at depth, the scene is dominated by blue and green wavelengths. This is normal. You can fix it in editing by adjusting white balance, or use a red filter to correct it at the time of shooting.

Can I use the flash underwater?

It’s not recommended. The flash reflects off particles in the water, creating backscatter – bright white spots that ruin the photo. Turn it off and use natural light or an external video light instead.

How do I take a photo with a waterproof case?

Most cases have a physical shutter button that presses the volume button on your phone. If not, you can use the volume buttons on the side of the phone, which are usually accessible through the case. Test before going underwater.

Is it safe to take my iPhone in the ocean?

Saltwater is more corrosive than fresh water. Even with water resistance, salt can damage seals and ports. Use a waterproof case and rinse your phone in fresh water immediately after exposure. Never charge your phone until it’s completely dry.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →