This guide walks you through a structured, repeatable method for comparing how the iPhone 18 Pro Max performs across seven popular games. You will measure frame rate stability, thermals, and battery drain using the phone’s built-in tools and a few free apps, giving you a clear picture of its gaming capabilities without guesswork.
What You’ll Need
- iPhone 18 Pro Max with iOS 26 or later installed
- Seven games installed and fully updated (e.g., Genshin Impact, Call of Duty Mobile, PUBG Mobile, Asphalt 9, Diablo Immortal, Honkai Star Rail, and Minecraft)
- A stable Wi-Fi connection or strong cellular signal
- A stopwatch or timer app
- Access to the Settings app and the built-in Screen Time / Battery usage data
- Optional but recommended: a phone cooling fan or a well-ventilated room
Step-by-Step
- Prepare the phone: Close all background apps by swiping up from the bottom and pausing on the app switcher, then swiping each card away. Turn off Low Power Mode and ensure Brightness is set to a fixed level (e.g., 50%). Disable auto-brightness in Settings > Accessibility > Display & Text Size.
- Charge to 100%: Plug the phone in and let it reach a full charge. Unplug it and note the exact time and battery percentage (should be 100%). This gives you a clean baseline for battery drain testing.
- Set up the first game: Launch the first game in your list. Go into its graphics settings and set everything to the highest available preset (e.g., “Ultra” or “High”). Disable any frame rate cap if the option exists, and set the frame rate target to the maximum (usually 60 or 120 FPS).
- Start the measurement session: Begin a 15-minute play session. Use the same in-game activity for each game—for example, a specific story mission, a multiplayer match, or a heavy combat area. Start your stopwatch the moment you enter gameplay.
- Monitor frame rate: If the game has a built-in performance overlay (many do in their settings), enable it. Otherwise, use a third-party FPS counter app from the App Store that works with an overlay. Record the average FPS and any noticeable stutters every 5 minutes in a notes app.
- Check temperature: After 5 minutes, 10 minutes, and 15 minutes, feel the back of the phone near the camera module and the bottom edge. Note whether it feels warm or hot. For a more precise reading, use a thermal camera attachment or an app that reads the battery temperature (if available). Record the subjective heat level (Cool, Warm, Hot, Very Hot) at each interval.
- Record battery drain: At the end of the 15-minute session, note the battery percentage. Subtract it from 100% to get the drain percentage for that game. For example, if it drops to 92%, the drain is 8%.
- Repeat for all seven games: After finishing the first game, close it completely. Wait for the phone to cool down to room temperature (or use a fan for 5 minutes). Repeat steps 3 through 7 for each of the remaining six games, using the same 15-minute duration and the same brightness and volume settings.
- Compile your data: Create a simple table in your notes app with columns for Game, Average FPS, Stutter Frequency (None, Rare, Occasional, Frequent), Heat Level at 15 min, and Battery Drain %. Fill it in as you go.
- Analyze the results: Look for patterns. Which game held 60 FPS without stutters? Which game made the phone hottest? Which game drained the most battery? Rank the seven games from best to worst performance on your specific device.
Common Mistakes
- Not using the same settings: If you change the graphics preset between games or sessions, the comparison is invalid. Always max out settings for every game.
- Playing different content: A quiet exploration area will stress the GPU less than a crowded battle. Use the same type of content for each game to keep the load comparable.
- Ignoring background activity: Notifications, background app refresh, or a syncing iCloud backup can skew FPS and battery results. Turn on Do Not Disturb and disable Background App Refresh during testing.
- Testing while charging: Charging adds heat and can cause throttling. Always test on battery power.
- Forgetting to cool down: If the phone is still warm from the previous test, the next game will start at a thermal disadvantage. Wait for it to cool completely.
Tips
- Run each test twice and average the results to reduce variance from network lag or a single bad match.
- Use the same Wi-Fi router and stand in the same spot for each test to minimize network-related stutters.
- Take a screenshot of the in-game settings menu for each game so you can verify you used the same configuration later.
- If you have a case, remove it during testing. Cases trap heat and change the thermal behavior you are measuring.
- Write down the iOS version you are on. Apple occasionally updates performance profiles, so note the version for reference.
Troubleshooting
- Game won’t launch: Force-quit the game, restart the phone, and try again. If it still fails, check for an update in the App Store or reinstall the game (make sure your save is backed up).
- FPS counter not appearing: Some third-party FPS apps require permission to draw over other apps. Go to Settings > Privacy & Security > Other Apps and enable “Draw over other apps” for the FPS app.
- Phone gets extremely hot and screen dims: This is thermal throttling. Stop the test immediately, let the phone cool down, and consider that this game is pushing the hardware too hard. You may need to reduce the graphics settings for that specific game.
- Battery percentage jumps around: The percentage can fluctuate slightly due to battery chemistry. Use the battery drain from the Settings > Battery page (last 24 hours or last 10 days) for a more accurate per-app percentage, or use a third-party battery monitor.
- Results seem inconsistent between runs: Check that no system update downloaded in the background. Also, ensure no other device on your network is hogging bandwidth. Run the test again at a quieter time.
Frequently Asked Questions
Q: Do I need a ProMotion display for this test?
A: No. The iPhone 18 Pro Max has a 120Hz display, but the test method works on any iPhone. The FPS counter will show the actual rendered frame rate, not the display refresh rate.
Q: Can I test games that don’t have a built-in FPS counter?
A: Yes. Use a third-party FPS overlay app. Many are free and work by reading the Metal API. If they don’t work, you can estimate smoothness by eye, but the data will be less precise.
Q: How long should each test session be?
A: Fifteen minutes is a good balance. It’s long enough to trigger thermal throttling in most games, but short enough to keep the total testing time reasonable (about 1.75 hours for seven games).
Q: What if a game doesn’t support the highest graphics settings on this phone?
A: Use the highest setting that the game offers. Note in your results that a particular game’s max setting is lower than others, which is part of the comparison.
Q: Is it okay to use a phone cooler during the test?
A: For a fair comparison, do not use an external cooler. The goal is to see how the phone performs on its own. If you use a cooler, it masks the phone’s thermal management.
Q: Will these results tell me which game is “best”?
A: The results tell you which game runs most smoothly and efficiently on the hardware. “Best” is subjective—a game that runs at 60 FPS but drains 15% battery might be less desirable than one that runs at 55 FPS and drains 10%.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Hogwarts Legacy Microsoft Visual C Runtime Error Fix
- Set Up UPI Payments Through WhatsApp
- Pair Oppo Enco Earbuds with Android, iPhone & Windows
- Fix Administrator Account Disabled Error in Windows 11
- How to Play Kodi on Smart TV from PC
- How to Change Password in Linux (Command Line)