sodcalculator

10 Tech How-To

Windows Search Service: Turn It Off or On

Guide 10-55325 · Updated · Step by step

This guide shows you how to stop or start the Windows Search service in Windows 10, which controls the indexing that makes the Start menu search and File Explorer search fast. You might want to disable it if it uses too much CPU or disk, or if you prefer a lighter system. You’ll need administrator access on your PC.

What You’ll Need

  • An administrator account on the Windows 10 PC.
  • A few minutes of time. No extra software is required.

Step-by-Step

  1. Open the Services window. Press Win + R to open the Run dialog, type services.msc, and press Enter. Alternatively, you can search for “Services” in the Start menu and click the result.
  2. Find the Windows Search service. In the Services list, scroll down to find Windows Search. It’s usually near the bottom of the list, sorted alphabetically under “W”.
  3. Open its properties. Right-click on Windows Search and select Properties from the context menu.
  4. Change the startup type. In the Properties window, go to the General tab. Look for the Startup type drop-down menu. To turn the service off, select Disabled. To turn it back on later, select Automatic (the default) or Automatic (Delayed Start).
  5. Stop or start the service. Below the startup type, click the Stop button to stop the service immediately (if it’s running). To start it, click Start. If you set the startup type to Disabled, the service will not start automatically, but you can still start it manually here if needed (though it will revert to disabled on reboot).
  6. Apply the changes. Click Apply, then OK to save your changes. If you stopped the service, it will stop immediately. If you changed the startup type to Disabled, the service will not start the next time you boot your PC.
  7. Verify the change (optional). To confirm, open the Services window again and check the Status column for “Windows Search”. It should be blank (stopped) if you stopped it, and the Startup Type column should show “Disabled” if you set that.

Common Mistakes

  • Only stopping, not disabling. If you click “Stop” but leave the startup type as “Automatic”, the service will start again on the next reboot or after a while. To keep it off, you must set the startup type to Disabled.
  • Forgetting to apply. If you click OK without first clicking Apply, the changes might not take effect. Always click Apply first.
  • Disabling the wrong service. Make sure you’re changing Windows Search, not “Windows Update” or “Windows Defender”. Double-check the name before clicking.

Tips

  • If you only want to reduce indexing load without fully disabling, consider changing the indexing options instead: go to Control Panel > Indexing Options and remove locations you don’t need.
  • If you disable Windows Search, the Start menu search will still work but will be much slower and won’t find files by their content. You can still browse folders normally.
  • To re-enable later, follow the same steps and set the startup type to Automatic, then click Start.

Troubleshooting

  • Service won’t stop. Sometimes a search indexer process is stuck. Open Task Manager (Ctrl+Shift+Esc), go to the Details tab, find SearchIndexer.exe, right-click it and select End task. Then try stopping the service again.
  • Service won’t start. If you set it to Disabled and then try to start it, you’ll get an error. Change the startup type back to Automatic first, then click Start. If it still fails, check if the Windows Search service is set to depend on another service that’s also disabled (like “Windows Management Instrumentation”).
  • Search results are empty after re-enabling. After re-enabling, the index may need to rebuild. Go to Control Panel > Indexing Options and click Advanced, then Rebuild. This can take a while.
  • Permission errors. If you get an “Access denied” error, you are not running as an administrator. Right-click on the Services app and select “Run as administrator”.

Frequently Asked Questions

Is it safe to disable Windows Search?

Yes, it’s safe. Windows will still run, but the search function will be limited and slower. You can always re-enable it later.

Will disabling Windows Search affect my files?

No, your files remain untouched. Only the index that speeds up searches is affected.

How do I know if Windows Search is running?

Open the Services window and look at the Status column for “Windows Search”. If it’s blank, it’s stopped.

Can I set Windows Search to start manually instead of automatically?

Yes, you can select Manual in the startup type. Then the service will only start when something requests it, but it may still start on its own.

Why is Windows Search using high CPU?

This often happens during initial indexing or after adding many files. You can wait for it to finish, or disable the service if it’s a persistent problem.

Does disabling Windows Search affect Cortana?

Yes, Cortana relies on Windows Search for many functions. If you disable it, Cortana’s search-based features will not work properly.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →