sodcalculator

10 Tech How-To

Unroot Samsung Galaxy Grand 2 LTE SM-G7105

Guide 10-49234 · Updated · Step by step

Unrooting your Samsung Galaxy Grand 2 LTE (SM-G7105) removes root access and restores the stock firmware, which is often needed for warranty claims, receiving OTA updates, or using banking apps that block rooted devices. This guide walks you through the entire process using Odin, Samsung’s official flashing tool. Before you begin, back up your personal data (photos, contacts, messages) because the process will wipe the phone. Also ensure your battery is charged above 70% to avoid a mid-flash shutdown.

What You’ll Need

  • A Windows PC (Odin does not run on macOS or Linux natively).
  • The stock firmware file for the SM-G7105 (search for “SM-G7105 stock firmware” on sites like SamMobile or Updato; download the correct region version).
  • Odin 3.13.1 or a compatible version (download from a trusted source like XDA-Developers).
  • Samsung USB drivers installed on your PC.
  • A USB cable (preferably the original one) and a microSD card (optional, for storing the firmware).

Step-by-Step

  1. Back up your data. Use Samsung Smart Switch or manually copy your photos, contacts, and documents to your PC or SD card. The flashing process will erase everything on the phone.
  2. Download and extract the firmware. Download the stock firmware for your exact model (SM-G7105) and region. Extract the ZIP file; you should get a file with a .tar.md5 extension (or a .tar file). Do not modify this file.
  3. Install Samsung USB drivers. If you haven’t already, install the Samsung USB driver on your PC. You can get it from Samsung’s website or from the firmware download site.
  4. Enable USB debugging and OEM unlock (if applicable). On your phone, go to Settings > About Phone and tap Build Number seven times to enable Developer Options. Then go to Settings > Developer Options and enable USB Debugging and OEM Unlock (if present). Note: On some Android versions, OEM Unlock is not available for carrier-locked devices.
  5. Boot your phone into Download Mode. Turn off the phone. Press and hold Volume Down + Home + Power simultaneously. When the warning screen appears, press Volume Up to continue into Download Mode.
  6. Open Odin on your PC. Right-click the Odin executable and select Run as Administrator. You should see a message in the log box indicating that a device has been added.
  7. Connect your phone to the PC. Use a USB cable. Wait for Odin to recognize the device; the ID:COM box should turn blue or yellow, and the log should say “Added!!”. If it doesn’t, reinstall drivers or try a different USB port.
  8. Load the firmware into Odin. Click the AP (or PDA) button in Odin and select the firmware file you extracted earlier (the .tar.md5 file). Do not touch any other buttons (BL, CP, CSC) unless you have a specific need.
  9. Disable Auto Reboot and F. Reset Time (optional but recommended). In Odin, uncheck Auto Reboot and F. Reset Time. This gives you more control if something goes wrong. However, many guides recommend leaving them checked for a simple flash. If you uncheck them, you’ll need to manually reboot after the flash.
  10. Start the flash. Click the Start button in Odin. The flashing process will begin, and you’ll see a progress bar on your phone. Do not unplug the cable or touch the phone until the process completes.
  11. Wait for the PASS message. When the flash is successful, Odin will show a green “PASS!” message in the top-left corner. The phone will reboot automatically (if Auto Reboot was checked) or you’ll need to manually reboot by holding Power.
  12. Set up your phone. After reboot, the phone will be running stock firmware with no root. You’ll need to go through the initial setup. If you backed up data, restore it now.

Common Mistakes

  • Using the wrong firmware. Flashing a firmware meant for a different model (e.g., SM-G7102) can brick your phone. Always verify the model number (SM-G7105) and region.
  • Not installing USB drivers. Odin won’t recognize the phone without proper drivers. Install them before connecting.
  • Interrupting the flash. Unplugging the USB cable or pressing buttons on the phone during the flash can cause a hard brick. Be patient.
  • Using a corrupted firmware file. A partial download can cause the flash to fail. Always check the MD5 checksum if provided, and re-download if necessary.
  • Forgetting to back up. The flash wipes all data. If you skip the backup, you’ll lose everything.

Tips

  • Use the original USB cable and a USB 2.0 port on your PC for a stable connection.
  • If you’re worried about a failed flash, keep the phone in Download Mode and try again; it’s nearly impossible to brick a Samsung phone if you can still get into Download Mode.
  • After unrooting, consider doing a factory reset from the recovery menu to ensure all root remnants are gone. To do this, boot into Recovery (Volume Up + Home + Power) and select Wipe data/factory reset.
  • If you plan to root again later, note that the warranty void flag (Knox) may have been tripped by the initial root, and unrooting does not reset it.

Troubleshooting

  • Odin doesn’t recognize the phone. Reinstall Samsung USB drivers, try a different USB port, or replace the USB cable. Also, ensure the phone is in Download Mode (not just powered on).
  • Flash fails with “FAIL” message. This usually indicates a firmware mismatch or a corrupted file. Re-download the firmware, verify the model number, and try again. If it still fails, try a different Odin version (e.g., 3.10.7).
  • Phone is stuck in a boot loop after flash. This can happen if the firmware is not fully compatible or if the cache wasn’t cleared. Boot into Recovery Mode (Volume Up + Home + Power) and perform a factory reset (wipe data/factory reset and wipe cache partition).
  • Phone is bricked (no response to power button). If the phone doesn’t turn on at all, try holding Volume Down + Home + Power to get into Download Mode. If that works, reflash the firmware. If not, you may need to take it to a service center.
  • Root checker still says rooted. Some root apps leave traces. Use a root checker app to verify; if it still says rooted, flash the firmware again, making sure you use the full stock firmware (not a pre-rooted one).

Frequently Asked Questions

Will unrooting void my warranty? Unrooting restores the stock software, which typically satisfies warranty conditions. However, if the Knox counter has been tripped (which happens when you root), it may still be flagged. You can check the Knox status in Download Mode (it shows 0x0 if not tripped).

Do I need to unlock the bootloader to unroot? No, unrooting is done by flashing stock firmware via Odin, which does not require an unlocked bootloader. In fact, locking the bootloader is not necessary for this process.

Can I unroot without a PC? No, the standard method requires a PC with Odin. There is no reliable on-device method to completely restore stock firmware without a PC.

Will I lose my data? Yes, flashing stock firmware wipes all data, including apps, photos, and settings. Back up before starting.

What if I only want to remove root but keep custom recovery? That’s not possible with this method. Flashing stock firmware removes both root and custom recovery. If you want to keep a custom recovery, you’d need to flash a stock ROM but then reflash recovery, which is more complex and not covered here.

Can I use this guide for other Galaxy models? The steps are similar for most Samsung devices, but the firmware file must be specific to your model. Never use a firmware for a different model.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →